|
[China]
Trade Verify
Address: 500 M North of Taicheng Industrial Area, Anping County,Hengshui City,Hebei Province.China.
Contact name:Jack Zhang
Anping Dixun Wire Mesh Products Co., Ltd |
|
Verified Suppliers
|
|
|
PLC Variable Frequency Control Two Ribbed Cold Rolled Steel Wire Drawing Machine
Two Ribbed Cold Rolled Steel Wire Drawing Machine Introduction:
The ordinary hot rolled round steel bar (Q235 or 300 material)
through the cold rolling, so that the cold rolled ribbed steel bar
extension, much stronger. Can fully meet the CRB600 CRB800H high
ductility bar requirements. The application range of cold rolled
ribbed bars is extended.
Two Ribbed Cold Rolled Steel Wire Drawing Machine Features:
1. The two ribbed cold rolled steel wire drawing
machine adopts PLC touch screen intelligent control system,
which makes the operation more simple, intelligent, durable, green
and environmental protection.
2. The Two Ribbed Cold Rolled Steel Wire Drawing
Machine adopts the world's most advanced frequency conversion
and servo technology and the self-owned frequency conversion
control technology. Effective protection of the transmission and
transformation system and equipment from damage, can prolong the
service life of the machine, can save 40% electricity, line speed
can reach 120-180 meters per minute, improve the production
efficiency of more than 40%.
3. The Two Ribbed Cold Rolled Steel Wire Drawing
Machine adopts the self-developed reducer as the patented
product, the fastest speed in China, simplifies the structure of
the equipment, and makes the equipment more reasonable and compact.
Effectively improve the transmission efficiency of more than 30%.
The stability of the equipment is improved by more than 60%, which
effectively improves the production efficiency of the equipment.
4. The Two Ribbed Cold Rolled Steel Wire Drawing Machine is
equipped with super audio induction heating system, using the
principle of spiral induction heating, so that the steel bar heated
evenly, mechanical indication is stable, the surface of the blue
protective layer so that the steel bar corrosion and rust.
5. The straightening machine adopts multi-wheel synchronous control
technology, which has good straightening effect and little damage
to the surface of steel bar.
6. The cutting machine adopts independent research and development
frequency conversion servo flying shear control system, easy to
operate, high degree of numerical control, low failure rate.Small
cutting error. The cutting error is within 5 mm.
Two Ribbed Cold Rolled Steel Wire Drawing Machine Technical Parameters:
| Model | DX-20000T | DX-30000T | DX-50000T |
| Control technology | Variable frequency | Touch screen|+PLC+encoder | Touch screen|+PLC+encoder |
| Max inlet wire rod | 14mm | 12mm | 18mm |
| Outlet rebar | 5-12mm | 5.5-11mm | 6-16mm |
| Production speed | 120m/min | 180m/min | 190m/min |
| Cutting rebar length | 3-12m | 1-12m | 1-12m |
| Rebar falling way | Automatic | Automatic | Automatic |
| Rewind rebar weight | 1 ton or 2tons | 1 ton or 2 tons | 1 ton or 2 tons |
| Rewind rebar machine | Automatic | Automatic | Automatic |
| Method of adjust speed | Variable frequency | CNC | CNC |
| Cutting rebar error | 5mm | 3mm | 3mm |
| Cutting rebar method | variable frequency | servo motor | servo motor |
| Main machine motor | 75kw | 110kw | 160kw |
| Heat power | 600kw | 800kw | 1000kw |
| Total power | 675kw | 910kw | 1160kw |
| Cold rolled times | 2+1 | 2+1 | 2+1 |
| Straighten rebar method | direct straighen | direct straighen | direct straighen |
| Labor cost | 2 persons | 2 persons | 2 persons |
| Installation length | 40*4m | 60*5m | 90*5m |
| Raw material | Q195 Q235 | Q195 Q235 | Q195 Q235 |
Two Ribbed Cold Rolled Steel Wire Drawing Machine Applications:
The two ribbed rebar widely used in construction, house construction,bridge construction, welded mesh.
Two Ribbed Cold Rolled Steel Wire Drawing Machine Packing:
Two Ribbed Cold Rolled Steel Wire Drawing Machine Photos:
