PLC Concrete Reinforcing Mesh Panel Welding Machine Rebar Diameter 12mm

Rebar Diameter 12mm PLC Concrete Reinforcing Mesh Panel Welding Machine

Introduction of Concrete Reinforcing Mesh Panel Welding Machine:

Pneumatic type concrete reinforcing mesh panel welding machine is our factory new design mechanical, used advanced European welding technologies, high efficiency, fast speed, energy saving, long service life. it is the most advanced welding machine in China.

1. Control system Mitsubishi or Panasonic PLC automatic control system, combined with Weinview touch screen, can directly input and display equipment operating parameters, intelligent and easy to operate.

2. Weft wire hopper: the stepper motor drives the disk-type device to drop wires automatically, and the hopper has a large capacity of storing wires max up to 1.5 tons. When there is no cross wire in the hopper, the equipment will stop running automatically.

3. Sending longitudinal wire feeding mechanism: servo motor is equipped with planetary reducer to drive pneumatic compression wire feeding device to send wire to the welding position. The equipment is automatically welding.

4. Mesh pulling mechanism: Japan Panasonic servo motor supporting planetary reducer drives pneumatic clamping mesh pulling device to ensure the stability of the system and the standard size of the welded mesh.Automatic reciprocating mesh drawing can realize the production of lengthening size mesh.

5. Water-cooled welding electrodes and a new type of special water-cooling transformer welding mesh with epoxy resin are adopted, which is smaller in size and higher in safety and reliability than traditional transformers.

Features of Concrete Reinforcing Mesh Panel Welding Machine:

1. SMC (Japan) custom-made 90 multi force air cylinders

1. Output power increase 20%.

2. Air consumption save 30%.

3. Air cylinder length reduce 40%, short stroke.

4. Welding pressure: 570KG.

5. Piston rods don't rotate.

6. Single-acting cylinder, connect with the electromagnetic valve by one air pipe.

7. Compared with the old type machine, total power consumption saves 50%.

2. Auto feeding line wire system

Line wires are automatically clamped by SMC air cylinders, no need to adjust for different wire diameters.

3. Cross wire feeding system

There is one motor& hardened reducer that feeds a bulk of wires to the insider feeder continuously. It can bear max.1T wires.

4. Pulling mesh system

The up and down of the pulling a hook is controlled by SMC (Japan) air cylinders, and Panasonic (Japan) servo motor 2kw and planetary reducer to control mesh pulling, high precision, big power.

Technical Parameters of Concrete Reinforcing Mesh Panel Welding Machine:

Applications of Concrete Reinforcing Mesh Panel Welding Machine:

The concrete reinforcing mesh panel is mainly used for highway, railway, bridge, enclosure mesh, concrete foundation reinforcing mesh, construction mesh.

Photos of Concrete Reinforcing Mesh Panel Welding Machine: