|
[China]
Trade Verify
Contact name:
Beijing Silk Road Enterprise Management Services Co.,LTD |
|
Verified Suppliers
|
|
|
PTFE Knit Mesh Demister Mist Eliminator 900 Mm 1 Whole Round Shape
PTFE is usually considered the king of the plastic materials. It has perfect resistance to acid and other corrossive solutions. And It has good performance with a relatively high temperature. The working temperature of PTFE material can be as high as 250 ℃. PTFE mesh pad is made of knitted PTFE wire mesh tube. If grids are needed, both PTFE and SS316L materials are available with us. Usually if the opertation condition is high corrosive, we recommend you use PTFE grids, too. Pure PTFE material assures a longer period of service time, which at last helps save the total cost.
PTFE knit mesh demister mist eliminator in this case:
| Item | Value | Unit |
| Material | PTFE | / |
| Shape & Size | Φ900 | mm |
| Mesh Thickness | 150 | mm |
| Demsiter Height | 200 | mm |
| Wire Diameter | 0.3 | mm |
| Mesh Density | 193.7 | kg/m3 |
| Void Fraction | 0.976 | / |
| Specific Area | 346 | m2/m3 |
| Grids | 25*3 flat bar | mm |
The benefits Hualai can provides with our demister mist eliminators:
Advanced mechanical design and careful selection of materials provide maximum performance lifetime.
As a consequence of maximizing performance lifetime, life-cycle cost (total cost) is minimized.
Superior technical support minimizes risk in process design and plant operations.
When-needed delivery prevents unnecessary plant downtime.
Industry leadership in quality assures customer satisfaction
Where are DEMISTER units used?
Knockout drums and separators – save on capital costs by decreasing vessel size-recover costly fatty acids from stream-reduce compressor maintenance by preventing scale build-up.
Absorbers – reduce overhead losses of glycols in dehydrators to no more than 0.1 gal/MMSCF natural gas-cut losses of absorption oil and amines in CO2 systems.
Scrubbers – reduce chemical discharges from Kraft mill smelt dissolver tank to less than 0.11 kg/dry ton (0.25 lb/dry ton) of pulp-improve scrubber efficiency by removing particulates carried in entrained liquids.
Distillation columns – improve product purities and increase throughput capacities for petrochemicals, organic intermediates, fine chemicals.
Evaporators – prevent carryover loss of valuable products, keep condensate TDS <10 ppm for highest quality boiler feed water-clean up vacuum ejector stream discharge-lower maintenance in vapor re-compression systems.
High pressure steam systems – provide dry steam- cut TDS to <10 ppb in condensate-eliminate build-up on turbine blades.
Refinery towers – increase throughput capacity-take deeper cuts for greater product yields – prolong catalyst life in downstream cracking and reforming units by reducing carbon and metals in side
draws-use lower grade crudes.
Do you ever wonder what strength the PTFE grids can provide? Once we had a test done like below:
Welcome your inquiry with any questions! Here in Hualai we are
always ready to be helpful!
