Active Member
|
[China]
Contact name:Amy
Anping Yuanqiao Petrochemical Equipment Co., Ltd |
|
|
| Product Name: | Mist Eliminator | Feature: | High Efficiency |
|---|---|---|---|
| Use: | Franctionation | Material: | SS304 |
| Advantage: | Fast Delivery | Size: | Any Size As Per Order |
| High Light: | wire mesh demister pad,wire mesh pad | ||
1206 Mist Eliminator Pads SS304 Round Shape 1300mm In Diameter
How shall we understand the wire mesh demister pad code 1206? It
usually happens that we get customer inquiries with some codes like
this. Sometimes even the customers themselves can not indicate the
exact type of demister pads they want. With years' of valuable
experiences and deep understanding of the wire mesh demister pad,
Hualai factory is willing to help with what you need! Come and
check if I understand this demister type code rightly or not.
Demister pad vapor liquid separator Specifications in this case
| Item | Value | Unit |
| Material | SS304 | / |
| Shape & Size | Φ1300 | mm |
| Mesh Thickness | 100 | mm |
| Demsiter Height | 150 | mm |
| Wire Diameter | 0.15 | mm |
| Mesh Density | 192 | kg/m3 |
| Void Fraction | 0.976 | / |
| Specific Area | 645 | m2/m3 |
| Grids | 25*3 flat bar | mm |
Advantages of Yuanqiao wire mesh mist eliminator:
SALIENT FEATURES:
High removal efficiency
No limitation on size or shape.
Easily installed in existing vessels
Little maintenance or service required
Almost no corrosion or temperature limitations
Negligible pressure drop, less than 25mm of water gauge
Applications of some main type of demister pad:
Mesh Density | Eq to: YORK | Description |
| 80 | 931 | For a given load of mist, the highest flow velocity is achieved of all styles. Ideal where it is required to minimize the pressure loss, possible clogging is concerned, the size of particle to be collected is relatively large, and/or a very high efficiency is not required. |
| 144 | 431 | Used for general purposes. An efficiency of 98 to 99% is achieved at a velocity of 1 to 5 m/sec. |
| 192 | 421 | Used where an especially high efficiency is required. While a pressure loss is slightly higher, it achieves an efficiency of 99 to 100% with particle sizes 3μ or more at a velocity of 1 to 6 m/sec., and is ideal where an efficiency of 90% or more is required at a velocity of 1 m/sec. or less. |
| 216 | Used for collecting fine particles of 1 to 3μ in size. Especially for a low-density mist of 1.0 g or less, it is used in a thickness of 200 to 300 mm. | |
| 432 | 333 | Used for collecting fine particles. An efficiency higher than that of 216 can be achieved. The most remarkable characteristic is that it provides a high efficiency with a reduced thickness. |
