ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED |
|
BRC Concrete Reinforcing Mesh Welding Machine For 5--12mm
Function Features
1. This kind machine is our latest developed reinforcing mesh
welding equipment.
2. The line wire and the weft wire are pre-straight and pre-cut.
The line wire is feeding by the servo motor, pulling the wire net
by the servo motor auto.
3. The welding power comes from the spring. It is easy to control
the welding pressure.
4. The weft wire feeding from the multi hopper which capacity is
1.5t, more over ten times than the traditional hopper.
5. The new machine added the bear wire net and carries equipment
that makes the working more convenience. The welding part is used
the springiness input wire trunking that makes the welding copper
use for long time.
6.125kVA transformer with water cooling system and separately
welding controller.
7. This machine adopts synchronous control technique. The
center-control and weldingtime are composed of PLC program system.
The input front-panel is touch screen, the operate is more
intelligent and reasonable.
Technical parameter
Wire diameter | 5--12mm | Line wire form | pre-cut wire |
Weft wire distance | 100mm--300mm (adjustable) | Weft wire form | pre-cut wire |
Line wire distance | 100mm--300mm (adjustable) | Rated voltage | 380V/50HZ 3 phase |
Mesh width | 2500mm | Water cooling Transformer power | 125KVA X 13 |
Welding speed | 40-- 50times/min | Overall dimension | 20X 3.4X 2.4M |
Welding spot heads. | 26 | Max. mesh length | 6m |
Total weight | 7.5T | Motor | 15KW |