Active Member
|
[China]
Address: Wire Mesh Industry Zone, Anping County,Hengshui City,Hebei Province.China
Contact name:
ANPING MOLONGGANG SPOT WELDING EQUIPMENT COMPANY LIMITED |
|
|
Deformed Steel Bar Mesh Welding Machine / Concrete Rebar Mesh Welding Machine
Product description
The details of steel bar reinforcing mesh welding machinery
1. The machine is used for wire diameter 5-12mm, it is an automatic equipment that desiged and manufactured by ourselves. This machine is driven by pneumatic system and composed of line wire support system, water cooling welding transformer, pneumatic control cross wire falling system, servo motor pulling mesh device.
2. The machine uses PLC touch screen control technique, we use Japan, Sony digital control system which can be input to touch screen control panel to adjust the mesh size, so it can weld different mesh size on the same mesh.
3. Water-cooling transformer and water-cooling lower electrodes to make sure the welding firm during a long working time, and prolong the service life.
4. Feeding and Welding System Cross wire feeding: Firstly, the coil wires are straighten and cut into fixed length
by straightening cutting machine, which become weft wire. Then
worker put the weft wires into wire hopper. Wire hopper under the
control of step motor, the weft wires falling automatically one by
one
Line wire feeding: warp wires are the same to weft wires, firstly use straightening
cutting machine to straighten and cut coil wire into fixed length.
Then the line wires are sent by labor and fed automatically, when
it welding and drawing, labors can prepare the wires, it increases
the production efficiency.
5. Welding system: the machine welding system is controled by pneumatic system, which makes the adjusting of welding pressure simple and convenient. At the same time, the welding electrodes are equipped with water cooling system to make sure the welding during a long working time, and prolong the life .
6. The mesh pulling system is controlled by step motor, which makes the pulling mesh aperture more standard and accurate.
Technical parameter:
| Items | MLG-12AA-50-1200 | MLG-12AA50-1600 | MLG-12AA50-2500 |
| wire diameter | 5-12mm | 5-12mm | 5-12mm |
| line wire space | 100-300mm | 100-300mm | 100-300mm |
| cross wire space | 50-300mm | 50-300mm | 50-300mm |
| wire forms | pre-cut wires | pre-cut wires | pre-cut wires |
| mesh width | 1200mm | 1600mm | 2500mm |
| number of electrodes | 12 (customzied) | 16(customized) | 25(customized) |
| welding speed | 40-60times/min | 40-60times/min | 40-60times/min |
| Cooling system | Water cooling transformer | Water cooling transformer | Water cooling transformer |
| Controlling system | PLC touch screen | PLC touch screen | PLC touch screen |
Note: All the parameters can be customzied according to customers' requirement.
1.If the buyers need, we can send our technical staff to the buyers factory to install the machine and providing the training in 30 days after the machines arrived the destination port.
2.Maintenance period :one year for whole machine except vulnerable parts
3.The numbers of technical persons: one technician per machine
4.The fees: the buyer have to pay the technical salary 80 USD per day, and the round-trip ticket, accommodation and other related fees.
During the maintenance period , if the parts are broken caused by the product problem, seller will offer the parts for free, if you need we assign the technicians to your factory, then you will pay some related fees.
Q: How to get an accurate quotation?
1. Wire diameter : From mm to mm.
2. Line wire space : From mm to mm. Cross wire space : From mm to mm.
3. Mesh width: 1200mm,1500mm, 2100mm, 2500mm, 3000mm ( customized)
4. Do you want to weld wire mesh panel or mesh in coil ?
Finished product & Application
