Active Member
|
[China]
Address: Area 4,8#, no.5 Jingyi Road, East District of Industrial Zone, Anping County
Contact name:WU
Anping County Anhesheng Hardware Mesh Products Co., Ltd. |
|
|
PVC PVDF 125X Plastic Structured Packing For Tail Gas Purification
Plastic Structured packing classification
Structural packaging is constructed from corrugated and deformed
plastic sheets. The inclination Angle of the corrugation of the
adjacent plate is opposite to the vertical column axis, forming a
focal point at each point where the corrugation intersects. The
result is a very open honeycomb structure with sloping circulation
channels that provide a relatively high surface area but very low
resistance to gas flow. This structure ensures excellent and
uniform wetting under low and high liquid loads. Tower operations
under low liquid loads require specially designed dispensers to
ensure adequate surface wetting. Each subsequent layer of the
structural filler rotates 90° so that the sheet of one layer is
perpendicular to the sheet of the layer above and below. As it
passes through each layer, the gas and liquid mix completely
parallel to the plane of the sheet. By rotating the subsequent
layers, whether from side to side or from front to back, the entire
cross section of the tower is well mixed and spread out.
Perforation and surface structure maximize liquid diffusion.
Plastic Structured Packing Application
It is widely used in the operation of absorption and decomposition
absorption devices, especially in the production process with heavy
liquid load and high operating pressure, such as (HCl) and (H2SO4)
production, degassing CO2 and H2S from natural gas, drying
chlorine, liquid production, waste gas purification and
decomposition absorption deoxygenation devices.
Plastic Structured Packing Specification
Structured packaging has two slants, "X" and "Y". The "Y" type
packing, with an inclination of approximately 45º to the horizontal
axis, is the most widely used packing. They offer higher filtration
efficiency than the "X" type, but at the cost of higher pressure
drop/lower capacity. The "X" type packing has an inclination of 60°
to the horizontal axis and is suitable for high volume and low
pressure drop applications.
| The name of the packing | model | Specific surface area ㎡/m³ | Void fraction % | Packing weight kg/m³ | Peak height H-mm | Theoretical plate number Ntm | Pressure drop Pa/m | Maximum F-factor m/s(kg/m³) |
| Metal perforated plate packing | 125Y | 125 | 98 | 85-100 | 25.4 | 1.0-2.0 | 150 | 3 |
| 250Y | 250 | 97 | 120-170 | 12.5 | 2.0-3.0 | 200 | 2.6 | |
| 350Y | 350 | 94 | 240-280 | 9 | 20-2.5 | 300 | 2 | |
| 500Y | 500 | 92 | 360-400 | 6.3 | 4.0-5.0 | 180 | 1.8 | |
| Wire mesh packing | 250X | 250 | 97 | 70 | 12.6 | 2.5-3.0 | 25-120 | 2.5-3.5 |
| 500X | 500 | 95 | 140 | 6.3 | 4.0-5.0 | 200 | 2.0-2.4 | |
| 700X | 700 | 87 | 180 | 4.5 | 8.0-10.0 | 670 | 1.5-2.0 |
Anping County Hardware Mesh Products Co., Ltd. is located in Anping
County, Hebei Province, known as the "Hometown of Chinese Wire
Mesh". The company is a dedicated manufacturer of wire mesh
demisters. The company has more than 90 sets of knitted mesh
equipment. The wire mesh demister is the main product of our
company. Most of our employees are operation, maintenance, and
installation personnel with practical experience, who can provide
customers with the required engineering consultation and
installation of tank filtration. solution.Nearly 20 years of
experience in the production of mist eliminator mats, knitted wire
mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system
in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are
qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard
and popular sizes, we can also customize specific applications
according to customer needs.
During the company's development, through continuous on-the-spot
inspections, personal exchanges and cooperation with customers, and
comprehensive discounts and technical support, we have won strong
customer support and praise.
The company's performance has maintained an annual output value
growth rate of 30-40. Our employees pursue the policy of
"enterprising, truth-seeking, rigorous and united", continue to
develop and innovate, take technology as the core, and
wholeheartedly provide you with cost-effective products,
high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to
cooperating with you!
Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB
or CIF, packaging term, etc.
Q: Is the size fixed?
A: No, except for table size. Can be customized according to
demand!
Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type
of products you need.
Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific
quantity and type.
