Active Member
|
[China]
Address: Area 4,8#, no.5 Jingyi Road, East District of Industrial Zone, Anping County
Contact name:WU
Anping County Anhesheng Hardware Mesh Products Co., Ltd. |
|
|
250X 350X Corrosion resistant Ptfe Plastic Structured Packing
Structural packing classification
Main types of high-efficiency structured packing: Orifice
corrugated packing is a structured packing assembled with large
corrugations on the surface of a metal sheet. It has the
characteristics of low resistance, uniform gas-liquid distribution,
high efficiency, large flux, and insignificant amplification
effect. In negative pressure, normal pressure and pressurized
operation. Wire mesh corrugated packing is an important milestone
in the development of structured packing. This packing is arranged
by corrugated wire mesh sheets. The inclination angle of the
corrugated sheets is 30° or 50°. When , the upper and lower
two-person trays are staggered and stacked at 90°. It has the
advantages of high efficiency, pressure drop and large flux. The
products are BX and CY type, which are often used in vacuum
distillation, atmospheric distillation and absorption process of
difficult to separate and heat-sensitive materials. Punctured
corrugated packing is a structured packing formed by rolling a
slanted metal sheet to form small punctured holes with high density
and then pressing into corrugated sheets. Wire mesh corrugated
packing and other properties. Structured packing is a kind of
packing that is arranged in a tower according to a uniform
geometric figure and is neatly stacked. Due to its advantages of
large specific surface area, small pressure drop, uniform fluid
distribution, and high mass transfer and heat transfer efficiency,
it has been widely used. Metal structured packing was developed
earlier, and plastic structured packing, ceramic structured packing
and carbon fiber structured packing were developed successively.
Structured packaging has two slants, "X" and "Y". The "Y" type
packing, with an inclination of approximately 45º to the horizontal
axis, is the most widely used packing. They offer higher filtration
efficiency than the "X" type, but at the cost of higher pressure
drop/lower capacity. The "X" type packing has an inclination of 60°
to the horizontal axis and is suitable for high volume and low
pressure drop applications.
| The name of the packing | model | Specific surface area ㎡/m³ | Void fraction % | Packing weight kg/m³ | Peak height H-mm | Theoretical plate number Ntm | Pressure drop Pa/m | Maximum F-factor m/s(kg/m³) |
| Metal perforated plate packing | 125Y | 125 | 98 | 85-100 | 25.4 | 1.0-2.0 | 150 | 3 |
| 250Y | 250 | 97 | 120-170 | 12.5 | 2.0-3.0 | 200 | 2.6 | |
| 350Y | 350 | 94 | 240-280 | 9 | 20-2.5 | 300 | 2 | |
| 500Y | 500 | 92 | 360-400 | 6.3 | 4.0-5.0 | 180 | 1.8 | |
| Wire mesh packing | 250X | 250 | 97 | 70 | 12.6 | 2.5-3.0 | 25-120 | 2.5-3.5 |
| 500X | 500 | 95 | 140 | 6.3 | 4.0-5.0 | 200 | 2.0-2.4 | |
| 700X | 700 | 87 | 180 | 4.5 | 8.0-10.0 | 670 | 1.5-2.0 |
Anping County Hardware Mesh Products Co., Ltd. is located in Anping
County, Hebei Province, known as the "Hometown of Chinese Wire
Mesh". The company is a dedicated manufacturer of wire mesh
demisters. The company has more than 90 sets of knitted mesh
equipment. The wire mesh demister is the main product of our
company. Most of our employees are operation, maintenance, and
installation personnel with practical experience, who can provide
customers with the required engineering consultation and
installation of tank filtration. solution.Nearly 20 years of
experience in the production of mist eliminator mats, knitted wire
mesh, and other packaging materials.
We have ISO9001 certification and a strict quality control system
in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are
qualified and perform perfectly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard
and popular sizes, we can also customize specific applications
according to customer needs.
During the company's development, through continuous on-the-spot
inspections, personal exchanges and cooperation with customers, and
comprehensive discounts and technical support, we have won strong
customer support and praise.
The company's performance has maintained an annual output value
growth rate of 30-40. Our employees pursue the policy of
"enterprising, truth-seeking, rigorous and united", continue to
develop and innovate, take technology as the core, and
wholeheartedly provide you with cost-effective products,
high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to
cooperating with you!
Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB
or CIF, packaging term, etc.
Q: Is the size fixed?
A: No, except for table size. Can be customized according to
demand!
Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type
of products you need.
Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific
quantity and type.
