|
[China]
Trade Verify
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Contact name:June Zhao
Shenzhen Merrytek Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
ML30V-PV1 Constant Voltage 1-10V and PUSH DIM LED Driver 30w 24Vdc
150x52x30mm
Description
1, Ouput power: 30w Max.
2, Output voltage:24Vdc.
3, Dimming mode include 0-10V,1-10V,Push dim.
4, With top circuit design, AC-DC-DC, no flicker.
5, Press-in terminals in primary and secondary side, easy assembly.
6, Output current: 1.25A max
7, Synchronization: thanks to the MCU programme, up to 15pcs
drivers should be controlled by the same switch. This means there
is no need for any additional synchrony wire in larger
installations, where many drivers should be controlled by one
switch.
8, Memory function: The driver has built-in permanent memory
against power failure. Lights can return to previous dimming level
when switch off and on again, even at mains restores.
9, Maximum length of the cable, from switch to last driver is 20m.
10, Factory setting: 100% dimming level.
11, Protection: Short circuit / Over voltage / Over temperature.
12, 50,000 hours life time,5 years warranty.
Mechanical Specification
Specifications
Model NO. | ML30V-PV1 | |
Input | Input voltage | 220-240Vac, 50/60Hz |
Power factor (PF) | ≥0.9(@ 240Vac input, full load and without dimmer) | |
Efficiency | ≥82%(@ 240Vac input, full load and without dimmer) | |
Stand-by power | ≤0.5W | |
Max. output voltage | 24V DC | |
Output | Output current | 24V DC, 1.25A max. |
Voltage accuracy | ±5% | |
Rated power | 30W Max. | |
Dimming mode | 0-10V,1-10V, PUSH | |
Dimming | Dimming range | 0%-100% |
Working temperature | -25℃~50℃ | |
Environment | Storage temperature | -40℃~80℃ |
Insulation class | Class II, SELV | |
Safety and EMC | Withstand voltage | Input-Output: 3.75kVac/5mA/1min |
EMC | Compliance to EN55015, EN61000-3-2 Class C, EN61000-3-3, EN61547 | |
Safety | Compliance to EN61347-1, EN61347-2-13, EN60598-1, EN60598-2-6 | |
Short circuit | Protection mode: Auto recovery | |
Protection | Over temperature | Protection mode: Auto recovery |
Dimension | 202x58x40mm | |
Others | Enclosure | Plastic, white |
IP rating | IP20 | |
Connection | Input: 6-hole press-in type terminal(L, L, N, N) | |
Life time | 50,000h | |
Certification | CE | |
Packing | Bubble bag + cardboard + Carton | |
| ||
Applications
For LED panel light, LED down light, led strip, led tube etc…
Wire diagram
