|
[China]
Trade Verify
Address: 101-1101, Building 17, Dianda Guyuan Industrial Park, Mashantou Community, Matan Street, Guangming District, Shenzhen
Contact name:June Zhao
Shenzhen Merrytek Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
28W Microwave sensor driver multiple constant current 450mA / 550mA / 600mA / 700mA
Description:
1, Stand-by power ≤0.5W.
2, Support mounting height up to 6m Max.
3, Stand-by dimming level is optional, 10%/ 25%.
4, Compact size makes the drivers suitable to fix within most LED ceiling lights.
5, Working mode: Auto switch on/off or dimming by motion and ambient light level.
6, Integration of microwave motion sensor, daylight sensor and LED power supply technology, save labor cost for installation.
7, Detection area, time delay, daylight threshold, stand-by dimming time and stand-by dimming level can be set via DIP switch.
Specifications
INPUT
| Input voltage | 220-240Vac |
| Input frequency | 50-60Hz | |
| Input current | 0.15A max | |
| Power factor | ≥0.90 | |
| Efficiency | ≥84% | |
| Stand-by Power | ≤0.5W | |
OUTPUT
| Output constant current | 450mA/ 550mA/ 600mA/ 700mA, set via DIP switch |
| Output voltage | 22Vdc – 40Vdc | |
| Current accuracy | ±5% | |
| Output Power | 28W Max. | |
DETECTOR | HF system | 5.8Ghz±75Mhz, ISM wave band |
| Transmitting power | ＜0.5mW | |
| Detection range | 4m (@ 3m mounting height) | |
| Detection area | 50%/ 100% | |
| Hold time | 5s/ 90s/ 3min/ 10min | |
| Daylight sensor | 5lux/ 15lux/ 50lux/ Disable | |
| Stand-by period | 0s/ 30s/ 10min/ +∞ | |
| Stand-by DIM level | 10%/ 25% | |
| Mounting height | 6m Max. | |
| Motion detection | 0.5~3m/s | |
| Detection angle | 150° (Wall installation) 360° (Ceiling installation) | |
ENVIRONMENT
| Working temp.(Ta) | -20~45℃ |
| Surface temp.(Tc) | 85℃max | |
| Working humidity | 20~85%RH non-condensing | |
| Storage temp. | -35~80℃ | |
| Life time | ≥30000hours | |
PROTECTION
| Isolation class | ClassⅡ |
| Protection class | IP20 | |
| Short Circuit | Protection type: auto reset | |
| Over voltage | Protection type: auto reset | |
| No-load | Protection type: auto reset | |
SAFETY & EMC | Safety | EN61347-1 EN61347-2-13 |
| EMC | EN55015; EN61000-3-2 | |
| EN61000-3-3, EN61547 | ||
| Approvals | TUV, RoHS | |
| Withstand voltage | IN-OUT:3.75KVAC/5mA/1min |
Mechanical Specification:
Wring Diagram:
Detection Pattern:
Function:
Download:
