Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
N210110221AA PIECE NPM Original SMT Spare Parts for Panasonic
| Part No | N210110221AA |
| Part Name | PIECE |
| Condition | Original New |
| Material | steel |
| Usage | Panasonic machine |
| Type | Panasonic Smt part |
Hot sale stock list:
| CAM FOLLOWER | KYB-M704A-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| SHROUDED POGO BLOCK | 0938A-0007 |
| GUIDE,LINEAR | LWHD12X3 |
| GXH-1 FILTER | KYL-M860S-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| SENSOR,PELEC | KYL-M86HL-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| FFU | MX--575-A |
| NPM 230C NOZZLE | N610040784AD |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| GERA(HASUBA) | KYD-MC131-000 |
| 234F NOZZLE | 45466931 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| SDD Hard Disk | N610059692AA |
| TAIL PIVOT | P/N:0740C-0109 |
| COUPLING | KYB-M7116-000 |
| PIN_LOCATE | KYD-MC137-000 |
| YG12F BELT | KHY-M9129-00 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| FAN | 1204KL-04W-B59 |
| DSP-2008K SQUEEGE | L:20CM |
| BRACKET | KYL-M86KD-000/211FC709 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| PULLEY_TIMING | KYB-M91AL-000 |
| GEAR | KYD-MC21U-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| ASSY_LEVER | KYD-MC212-000 |
| COUPLING | KYK-M86AW-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| HNS,CORD | KYL-M8621-000 |
| NPM 240C NOZZLE | N610062681AD |
| FUSH-SPECIAL | KYF-M860F-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| LEVER | KYK-M861V-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| COVER ASSY | X-4700-067-4 |
| LEVER | KYB-M3T01-000 |
| 360F NOZZLE | 45466917 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| TOOL | N510031628AA |
| GEAR | KYD-MC23C-000/6301352305 |
| GREASE | N990PANA-023 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| NPM H8 SENSON | N510048691AA |
| BLOCK | KYL-M86KC-000/211G5472 |
| ASSY GRIP | KYD-MC21H-000 |
| HOLDER | KYB-M701R-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| ARM STEEL | N210007284AB |
| NPM 230CS NOZZLE | N610040788AD |
| BUSH,BEARING | KYB-M3T3R-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| CYLINDER | KYL-M869A-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| Fuji Filter | AA1FZ04 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| SENSOR,PELEC | KYK-M86DE-000 |
| COVER | KYK-M86RD-000 |
| BELT | 6*3080*0.9 mm |
| NOZZLE(WC01) | KYB-M77W1-100 |
| POWER SUPPLY | 11632XA |
| NOZZLE_HG52C | KYA-M7705-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| NPM FILTER | N610097899AA |
| DISK | KYB-M3T1A-000 |
| WASHER | 92902-03200 |
| LEVER | KYB-M3T0M-000 |
| PIN,HINGE | KYB-M3T31-000 |
| NPM X479 VALVE | N510054843AA |
| CASE-CONN | KYK-M860Y-000 |
| MOTOR | KYA-M700R-000 |
| COVER | KYM-M860X-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| WASHER | 92902-03100 |
| SONY MOTHER BOARD | 1-797-651-12 |
| ASSY_GEAR | KYD-MC412-000 |
| NPM 185 NOZZLE | N610070338AB |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| PIN,HINGE | KYD-MC41S-000 |
| VALVE | SY3240-5LZD |
| SPRING_COMP | KYD-MCN41-000 |
| SEAL | KYB-M704E-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| BUSH,BEARING | KYB-M3T3S-000 |
| GREASE FOR PANASONIC | N510048188AA |
| GEAR | KYD-MC23C-00 |
| ASSY,HOOK | KYD-MC40A-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| 904 NOZZLE | Y074-V904-0015 |
| MACHINE SCREW | KYD-MC14G-000 |
| 340F NOZZLE | 45466934 |
Why Choose Us?
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
