Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
Part No:185932 PULLEY,FLAT DEK Spare Parts
| Part No | 185932 |
| Part Name | PULLEY,FLAT |
| Condition | Original news or Compatible new |
| Material | steel |
| Usage | Dek machine |
| Type | Dek part |
Hot sale stock list:
| FFU | MX--575-A |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| NPM H16 SHAFT | N510064335AA |
| Encoder Read Head For Universal | 49566101 |
| ASSY,HOOK | KYD-MC40A-000 |
| GEAR | KYD-MC153-00 |
| COUPLING | KYK-M86AW-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| COVER(RB) | KYD-MC10L-000 |
| CASE-CONN | KYK-M860Y-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| GREASE FOR PANASONIC | N510048188AA |
| ASSY_GEAR | KYD-MC412-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| GEAR | KYD-MC20K-00 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| NOZZLE_HV14C | KYA-M7714-000 |
| FAN | 1204KL-04W-B59 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| SEAL | KYB-M704E-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| COVER ASSY | X-4700-067-4 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| YG12F BELT | KHY-M9129-00 |
| ETC MOTOR | PK2K93S-2D |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| NPM 235C NOZZLE | N610043814AD |
| NPM 235CS NOZZLE | N610043815AA |
| SPRING_COMP | KYB-M91CS-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| ASSY,GEAR | KYM-M862C-000 |
| VALVE | 4-187-212-01 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| HELICAL SPRING | N210068065AA |
| VALVE | SY3240-5LZD |
| FUSE | KYL-M86KH-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| DSP-2008K SQUEEGE | L:20CM |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| ASSY,LEVER | KYM-M864H-000 |
| BELT | N510021326AA |
| SENSOR | KYF-M8681-000 |
| PLATE | N610014970AE |
| LEVER(SUP) | KYD-MC20D-000 |
| NOZZLE | HG53G |
| SONY E1000 FILTER | 4-761-920-01 |
| SONY MOTHER BOARD | 1-797-651-12 |
| ASSY,LEVER | KYM-M8648-000 |
| BLOCK L3 | KYB-M960C-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| NPM H8 SENSON | N510048691AA |
| CPK JG0250 | CPK JG0250 |
| PIN-GAUGE | KXF00YHUA00 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| LINE-SENSOR | KYF-M8607-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| GEAR | KYK-M864C-000 |
| KIC ON BOARD | 6-10 CHANEL |
| 1220 NOZZLE | 51305323 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| BALL | 4-719-920-01 |
| HOLDER | KYB-M702F-000/0916DK2D |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| NPM 185 NOZZLE | N610070338AB |
| B-234 NOZZLE | 47561103-B-234 |
| LEVER | KYB-M3T22-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY GEAR | KYD-MC211-000 |
| GEAR | KYD-MC424-000/223E0481 |
| YG12 BELT | KHY-M9129-10 |
| 938 NOZZLE | 00322592-05 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| FILTER | K46-M8527-COX |
| MOTOR_DC | KYD-MC410-000 |
| SDD Hard Disk | N610059692AA |
| GT-24040B FEEDER | KYD-MCN00-00 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| COVER | KYM-M860X-000 |
| SONY1000 FILTER | 4-761-920-01 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| Fuji Packing | PH00991 |
| SENSOR,PELEC | KYL-M86HL-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| DISK | KYB-M3T1A-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| DRIVER | N510002593AA |
| NPM 240C NOZZLE | N610062681AD |
| SLIP RING | KYB-M7027-000 |
| COVER(RB) | KYM-M8612-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| MACHINE SCREW | KYD-MC14G-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| NPM H16 SENSON | N510054833AA |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| WASHER | KYD-MC22H-00 |
| ARM STEEL | N210007284AB |
| NPM 230CS NOZZLE | N610040788AD |
| SHROUDED POGO BLOCK | 0938A-0007 |
| BELT TIMING | KYA-M9152-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| NOZZLE_HG82C | KYA-M7708-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| GEAR | 4-719-921-02 |
| 904 NOZZLE | Y074-V904-0015 |
| SEAL | KYT-M862W-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| SPRING_COMP | KYD-MC129-000 |
| SLIP RING | KYB-M7027-000 |
| ASSY_LEVER | KYD-MC212-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| NPM FILTER | N610097899AA |
| PIN_LOCATE | KYD-MC137-000 |
| BELT | 44548605 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| SONY NOZZEL | AF10071 |
| BELT | 6*3080*0.9 mm |
| PIN-GAUGE | KXF00YHTA00 |
| 937 NOZZLE | 00322591-06 |
| 360F NOZZLE | 45466917 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| LEVER | KYB-M3T01-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| SPRING_COMP | KYD-MCN41-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| 935 NOZZLE | 00346524-03 |
| CAM FOLLOWER | KYB-M704A-000 |
| RT BELT | 3-212-264-01 |
| PIN,HINGE | KYB-M3T31-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| BELT | N510060977AA |
| BELT | 6*3080*0.9 mm |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| BOTTON | ZB6-EB3B |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| BELT | N510065133AA |
| 933 NOZZLE | 00346523-03 |
| BOLT-HEX-SCT | 90990-01J115 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| 340F NOZZLE | 45466934 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| CORD,BCR | KYF-M86NC-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| BLOCK | KYF-M867D-000 |
| COVER(LB) | KYM-M8657-000 |
| PIN,HINGE | KYD-MC41S-000 |
| PIN_LOCATE | KYD-MC132-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| LEVER | KYK-M861V-000 |
| GUIDE,LINEAR | LWHD12X3 |
| ASSY GRIP | KYD-MC21H-000 |
| GXH SPECIAL NOZZLE | 13053 |
| VALVE | SY3120-MZD-C6-F2 |
| LEVER | KYK-M86LV-000 |
| 234F NOZZLE | 45466931 |
| HV31 NOZZLE | KYL-M7718-000 |
| PLATE | KYA-M3804-000 |
| LEVER | KYB-M3T33-000 |
| HNS,CORD | KYL-M8621-000 |
| HOLDER | KYB-M701R-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| SONY NOZZEL AF12082 | AF12082 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| LEVER | KYB-M3T21-000 |
| FEEDER | GD38080 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| COUPLING | KYB-M7116-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| Fuji Filter | AA1FZ04 |
| COVER | KYK-M86RD-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| BLOCK | KYA-M7027-000 |
| GEAR | KYD-MC23C-00 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| BELT_TIMING | KYA-M914W-000 |
| PIN,HINGE | KYL-M860R-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| PIN_HINGE | KYD-MC41U-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| SPRING COMP | KYD-MC13T-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| BUSH,BEARING | KYB-M3T3S-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| MICRO METER | 350-251-30 |
| SPRING | P/N:0730C-0252 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| GRIP | KYD-MC109-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| GUIDE | KYD-MC11T-000 |
| SPRING_COMP | KYD-MC3T-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| NPM 230C NOZZLE | N610040784AD |
| FEEDER CABLE | KYL-M869D-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| ROLLER(B) | KYK-M86EM-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| GEAR | KYD-MC21U-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| SEAL | KYB-M702B-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| POGO BLOCK | 0738A-0029 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| DD MOTOR | KYF-M860E-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| PIN_LOCATE | KYD-MC21Y-000 |
| NPM X479 VALVE | N510054843AA |
| NOZZLE(FF01) | KYB-M77F1-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| GEAR | KYU-M868B-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| COUPLING | KYB-M702C-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| PCBA FIXTURE | FC150-130-60 |
| MOTOR | KYA-M700R-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| LEVER | KYB-M3T0M-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| WASHER | 92902-03100 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| NPM 226CS NOZZLE | N610040783AB |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| TOOL | N510031628AA |
| GREASE | N990PANA-023 |
| CYLINDER | KYL-M869A-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| BELT | 00334936S01 |
| PCB-MOUNT | KYK-M861W-000 |
| BM02 NOZZLE | BM02 |
| NOZZLE_HG52C | KYA-M7705-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| SONY NOZZLE | CF25200 |
| I/O CABLE,WIDE | 0938A-1007 |
| SPRING COMP | KYD-MC422-000 |
| PIN_HINGE | KYD-MC42S-000 |
| TIMING BELT | KYB-M919E-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| POWER SUPPLY | 11632XA |
| VALVE | 2-673-684-01 |
| UNIT,I/O | KYL-M86LV-000 |
| CASE-CONN | KYF-M860Y-000 |
| ROCK | 2-149-675-01 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| POWER SUPPLY | 1-474-020-11 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| WASHER | 90990-37J010 |
| NOZZLE(VC74) | KYK-M7725-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| PIPE FITTING | 630 048 4656 |
| WASHER | 92902-03200 |
| TAIL PIVOT | P/N:0740C-0109 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
