Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYB-M702C-000 / 0916DK19 COUPLING Smt Machine Parts for Hitachi GXH / SIGMA
| Part No | KYB-M702C-000/0916DK19 |
| Part Name | COUPLING |
| Condition | Compatible new / Original new |
| Material | aluminum |
| Usage | Hitachi Sigma / GXH machine |
| Type | Smt part |
Hot sale stock list:
| F8 SENSOR-PELEC | KYF-M8609-000 |
| PIN-GAUGE | KXF00YHUA00 |
| GERA(HASUBA) | KYD-MC131-000 |
| SONY NOZZEL AF12082 | AF12082 |
| PIN,HINGE | KYB-M3T31-000 |
| NPM X479 VALVE | N510054843AA |
| 935 NOZZLE | 00346524-03 |
| PIN_LOCATE | KYD-MC21Y-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| BUCK_UP_PIN | KYA-M3802-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| BM02 NOZZLE | BM02 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| MACHINE SCREW | KYD-MC14G-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| MOTOR_DC | KYD-MC410-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| TOOL | N510031628AA |
| P_RCG_SCOPE | KYB-M730B-000 |
| BALL | 4-719-920-01 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NPM 235C NOZZLE | N610043814AD |
| NOZZLE(WC01) | KYB-M77W1-100 |
| 1220 NOZZLE | 51305323 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| PIN_HINGE | KYD-MC42S-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| UNIT,I/O | KYL-M86LV-000 |
| WASHER | KYD-MC22H-00 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| COVER(LB) | KYM-M8657-000 |
| SENSOR | KYF-M8681-000 |
| PIN,HINGE | KYD-MC41S-000 |
| SPRING COMP | KYD-MC422-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| FEEDER CABLE | KYL-M869D-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| LEVER | KYB-M3T22-000 |
| NPM 230CS NOZZLE | N610040788AD |
| HV31 NOZZLE | KYL-M7718-000 |
| BELT_TIMING | KYA-M914W-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| SPRING_COMP | KYD-MCN41-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| LIGHTING_UNIT | KYB-M700T-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| VALVE | SY3120-MZD-C6-F2 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| VALVE | 4-187-212-01 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| SENSOR,PELEC | KYK-M86DE-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| TAIL PIVOT | P/N:0740C-0109 |
| GEAR | KYD-MC20K-00 |
| YG12 BELT | KHY-M9129-10 |
| BELT | N510021326AA |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| ASSY_GEAR | KYD-MC11A-000 |
| PIN_LOCATE | KYD-MC132-000 |
| CPK JG0250 | CPK JG0250 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| SLIP RING | KYB-M7027-000 |
| GUIDE | KYD-MC11T-000 |
| LEVER | KYB-M3T01-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| 234F NOZZLE | 45466931 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| COVER(RB) | KYM-M8612-000 |
| NPM FILTER | N610097899AA |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| COVER | KYK-M86RD-000 |
| BLOCK | KYF-M867D-000 |
| BELT | 44548605 |
| FEEDER | GD38080 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| NPM H16 SHAFT | N510064335AA |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| POWER SUPPLY | 11632XA |
| GEAR | KYD-MC424-000/223E0481 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| NOZZLE | HG53G |
| HNS,CORD | KYL-M8621-000 |
| FILTER | K46-M8527-COX |
| SHAFT ASSY. | KYF-M864U-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| LINE-SENSOR | KYF-M8607-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| HNS,LIGHTING | KYF-M861W-000 |
| HOLDER | KYB-M701R-000 |
| COUPLING | KYK-M86AW-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| SPRING | P/N:0730C-0252 |
| FAN | 1204KL-04W-B59 |
| TIMING BELT | KYB-M919E-000 |
| 340F NOZZLE | 45466934 |
| SENSOR,PELEC | KYL-M86HL-000 |
| GRIP | KYD-MC109-000 |
| PIN-GAUGE | KXF00YHTA00 |
| LEVER | KYK-M86LV-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| COVER | KYM-M860X-000 |
| KIC ON BOARD | 6-10 CHANEL |
| NPM 235CS NOZZLE | N610043815AA |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| DRIVER | N510002593AA |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| Encoder Read Head For Universal | 49566101 |
| BOTTON | ZB6-EB3B |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| 937 NOZZLE | 00322591-06 |
| SENSOR,PELEC | KYL-M8609-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| ASSY GRIP | KYD-MC21H-000 |
| SPRING_COMP | KYB-M91CS-000 |
| FFU | MX--575-A |
| NPM 226CS NOZZLE | N610040783AB |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| SPRING_COMP | KYD-MC129-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| LEVER | KYB-M3T33-000 |
| ASSY,GEAR | KYM-M862C-000 |
| BELT | N510060977AA |
| LEVER | KYK-M861V-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| CYLINDER | KYL-M869A-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| COVER ASSY | X-4700-067-4 |
| ASSY_GEAR | KYD-MC412-000 |
| SONY1000 FILTER | 4-761-920-01 |
| GEAR | KYD-MC23C-00 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| WASHER | 92902-03200 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| CASE-CONN | KYK-M860Y-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| DSP-2008K SQUEEGE | L:20CM |
| ASSY_LEVER | KYD-MC212-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| ASSY,LEVER | KYM-M864H-000 |
| PIN,HINGE | KYL-M860R-000 |
| WASHER | 90990-37J010 |
| PLATE | N610014970AE |
| CORD,BCR | KYF-M86NC-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| HOLDER | KYB-M702F-000/0916DK2D |
| PIN_HINGE | KYD-MC41U-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| SEAL | KYB-M704E-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| LEVER | KYB-M3T0M-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| BELT TIMING | KYA-M9152-000 |
| 938 NOZZLE | 00322592-05 |
| PLATE | KYA-M3804-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| LEVER(SUP) | KYD-MC20D-000 |
| SPRING COMP | KYD-MC13T-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| 933 NOZZLE | 00346523-03 |
| BLOCK | KYL-M86KC-000/211G5472 |
| NOZZLE_HG33C | KYA-M7703-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| SLIP RING | KYB-M7027-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| NPM H8 SENSON | N510048691AA |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| GXH SPECIAL NOZZLE | 13053 |
| BELT | N510065133AA |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| VALVE | 2-673-684-01 |
| POGO BLOCK | 0738A-0029 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| PIN_LOCATE | KYD-MC137-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| COUPLING | KYB-M7116-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| SONY NOZZLE | CF25200 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ASSY GEAR | KYD-MC211-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| Fuji Packing | PH00991 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| POWER SUPPLY | 1-474-020-11 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| MICRO METER | 350-251-30 |
| BUSH,BEARING | KYB-M3T3R-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| COVER(RB) | KYD-MC10L-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| NPM 230C NOZZLE | N610040784AD |
| SEAL | KYB-M702B-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| SDD Hard Disk | N610059692AA |
| NOZZLE_HV19C | KYA-M7719-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| 904 NOZZLE | Y074-V904-0015 |
| GEAR | KYD-MC153-00 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| NPM 185 NOZZLE | N610070338AB |
| PCB-MOUNT | KYK-M861W-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| BLOCK | KYA-M7027-000 |
| LEVER | KYB-M3T21-000 |
| PCBA FIXTURE | FC150-130-60 |
| MOTOR_DC | KYD-MCN2G-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| PIPE FITTING | 630 048 4656 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| BELT | 6*3080*0.9 mm |
| DD MOTOR | KYF-M860E-000 |
| ARM STEEL | N210007284AB |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| BLOCK L3 | KYB-M960C-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| WASHER | 92902-03100 |
| SPRING_COMP | KYD-MC3T-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| GREASE | N990PANA-023 |
| SEAL | KYT-M862W-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| BELT | 00334936S01 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| MOTOR | KYA-M700R-000 |
| GEAR | KYD-MC21U-000 |
| 360F NOZZLE | 45466917 |
| NPM 240C NOZZLE | N610062681AD |
| ASSY,LEVER | KYM-M8648-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| CAM_FOLLOWER | KYA-M912N-000 |
| GUIDE,LINEAR | LWHD12X3 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| B-234 NOZZLE | 47561103-B-234 |
| NPM H16 SENSON | N510054833AA |
| ROCK | 2-149-675-01 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| HELICAL SPRING | N210068065AA |
| ROLLER(B) | KYK-M86EM-000 |
| VALVE | SY3240-5LZD |
| YG12F BELT | KHY-M9129-00 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| DISK | KYB-M3T1A-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| SONY NOZZEL | AF10071 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| SENSOR-PELEC | KYK-M861Y-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| GEAR | KYU-M868B-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| FUSE | KYL-M86KH-000 |
| GREASE FOR PANASONIC | N510048188AA |
| COVER (12/16mm) | KYD-MC20Y-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| ETC MOTOR | PK2K93S-2D |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| BELT | 6*3080*0.9 mm |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| RT BELT | 3-212-264-01 |
| Fuji Filter | AA1FZ04 |
| COUPLING | KYB-M702C-000 |
| CASE-CONN | KYF-M860Y-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| GEAR | KYK-M864C-000 |
| GEAR | 4-719-921-02 |
| SONY E1000 FILTER | 4-761-920-01 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
