Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
09261502 / KYD-MCN2R-000 ASSY_MOTOR Smt Feeder Parts for Hitachi Machine
| Part No | 09261502 / KYD-MCN2R-000 |
| Part Name | ASSY_MOTOR |
| Condition | Original Used |
| Material | steel/rubber |
| Usage | Hitachi machine |
| Type | Smt Feeder part |
Hot sale stock list:
| VALVE | SY3120-MZD-C6-F2 |
| Fuji Packing | PH00991 |
| GEAR | KYK-M864C-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| NPM H16 SENSON | N510054833AA |
| TIMING BELT | KYB-M919E-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| SLIP RING | KYB-M7027-000 |
| BALL | 4-719-920-01 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| HNS,CORD | KYL-M8621-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| BELT | 00334936S01 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| GEAR | KYD-MC153-00 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| BELT | 6*3080*0.9 mm |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| DRIVER | N510002593AA |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| PIPE FITTING | 630 048 4656 |
| NPM 230C NOZZLE | N610040784AD |
| WASHER | 92902-03100 |
| DD MOTOR | KYF-M860E-000 |
| NPM 230CS NOZZLE | N610040788AD |
| MOTOR | KYA-M700R-000 |
| FEEDER | GD38080 |
| PIN-GAUGE | KXF00YHUA00 |
| MOTOR_DC | KYD-MC410-000 |
| PIN,HINGE | KYD-MC41S-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| CASE-CONN | KYF-M860Y-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| SPRING COMP | KYD-MC13T-000 |
| DISK | KYB-M3T1A-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| RT BELT | 3-212-264-01 |
| DSP-2008K SQUEEGE | L:20CM |
| NOZZLE(FF01) | KYB-M77F1-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| BLOCK L3 | KYB-M960C-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| ASSY,LEVER | KYM-M8648-000 |
| COUPLING | KYB-M702C-000 |
| SDD Hard Disk | N610059692AA |
| GXH-1 FILTER | KYL-M860S-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| BUCK_UP_PIN | KYA-M3802-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| ASSY GRIP | KYD-MC21H-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| SEAL | KYB-M702B-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| NPM H16 SHAFT | N510064335AA |
| ASSY_GEAR | KYD-MC40F-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| FILTER | K46-M8527-COX |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| HOLDER | KYB-M701R-000 |
| 935 NOZZLE | 00346524-03 |
| LEVER | KYB-M3T21-000 |
| COVER ASSY | X-4700-067-4 |
| GEAR | KYD-MC21U-000 |
| CASE-CONN | KYK-M860Y-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| CPK JG0250 | CPK JG0250 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| SEAL | KYB-M704E-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| COVER | KYM-M860X-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| NPM FILTER | N610097899AA |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| Fuji Filter | AA1FZ04 |
| SONY NOZZEL AF12082 | AF12082 |
| B-234 NOZZLE | 47561103-B-234 |
| NOZZLE(VC74) | KYK-M7725-000 |
| SPRING COMP | KYD-MC422-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| 234F NOZZLE | 45466931 |
| NOZZLE_HG82C | KYA-M7708-000 |
| UNIT,I/O | KYL-M86LV-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| GREASE | N990PANA-023 |
| PIN,HINGE | KYB-M3T2Y-000 |
| WASHER | 92902-03200 |
| 360F NOZZLE | 45466917 |
| BLOCK | KYA-M7027-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| COGNEX BOARD | KYK-M86PW-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| NPM 185 NOZZLE | N610070338AB |
| PULLEY_TIMING | KYB-M91AL-000 |
| YG12F BELT | KHY-M9129-00 |
| GEAR | KYD-MC20K-00 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| LEVER | KYB-M3T0M-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| 340F NOZZLE | 45466934 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| PLATE | N610014970AE |
| BELT TIMING | KYA-M9152-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| BELT | N510065133AA |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| GXH SPECIAL NOZZLE | 13053 |
| ASSY_LEVER | KYD-MC212-000 |
| SPRING_COMP | KYD-MCN41-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| Encoder Read Head For Universal | 49566101 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| NPM 240C NOZZLE | N610062681AD |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| GEAR | KYD-MC424-000/223E0481 |
| ASSY_SHAFT | KYF-M8651-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| UNIT,DRIVER | KYK-M860K-000 |
| COUPLING | KYK-M86AW-000 |
| TOOL | N510031628AA |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| NOZZLE_HV14C | KYA-M7714-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| FEEDER CABLE | KYL-M869D-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| SPRING_COMP | KYD-MC129-000 |
| VALVE | 2-673-684-01 |
| BLOCK | KYL-M86KC-000/211G5472 |
| WASHER | KYD-MC22H-00 |
| BUSH,BEARING | KYB-M3T3S-000 |
| PIN-GAUGE | KXF00YHTA00 |
| UNIT_DRIVER | KYK-M860F-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| SLIP RING | KYB-M7027-000 |
| NPM 235C NOZZLE | N610043814AD |
| 938 NOZZLE | 00322592-05 |
| GUIDE,LINEAR | KYF-M867P-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| VALVE | 4-187-212-01 |
| ETC MOTOR | PK2K93S-2D |
| SENSOR-PELEC | KYK-M861Y-000 |
| BELT | N510021326AA |
| SENSOR,PELEC | KYL-M86HL-000 |
| PCBA FIXTURE | FC150-130-60 |
| SPRING | P/N:0730C-0252 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| PIN_LOCATE | KYD-MC137-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| ASSY GEAR | KYD-MC211-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| VALVE | SY3240-5LZD |
| GEAR | KYD-MC23C-00 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| GRIP | KYD-MC109-000 |
| SONY NOZZLE | CF25200 |
| PIN_LOCATE | KYD-MC132-000 |
| BLOCK | KYF-M867D-000 |
| LEVER | KYK-M861V-000 |
| SPRING_COMP | KYD-MC3T-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| NOZZLE(BA06) | KYB-M77A6-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| SONY NOZZEL | AF10071 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| BELT_TIMING | KYA-M914W-000 |
| LINE-SENSOR | KYF-M8607-000 |
| COVER | KYK-M86RD-000 |
| MICRO METER | 350-251-30 |
| BELT | N510060977AA |
| NPM H8 SENSON | N510048691AA |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| P_RCG_SCOPE | KYB-M730B-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| 937 NOZZLE | 00322591-06 |
| SONY1000 FILTER | 4-761-920-01 |
| PLATE | KYA-M3804-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| LEVER | KYK-M86LV-000 |
| FUSE | KYL-M86KH-000 |
| POWER SUPPLY | 1-474-020-11 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| LIGHTING_UNIT | KYB-M700T-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| LEVER | KYB-M3T22-000 |
| FAN | 1204KL-04W-B59 |
| PIN,LOCATE | KYD-MCN3N-000 |
| GEAR | 4-719-921-02 |
| COUPLING | KYB-M7116-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| ASSY,SPROCKET | KYM-M862A-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| PIN_HINGE | KYD-MC42S-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| NPM X479 VALVE | N510054843AA |
| NPM 235CS NOZZLE | N610043815AA |
| CYLINDER | KYL-M869A-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| YG12 BELT | KHY-M9129-10 |
| GUIDE,LINEAR | LWHD12X3 |
| FFU | MX--575-A |
| COVER(RB) | KYD-MC10L-000 |
| ROLLER(B) | KYK-M86EM-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| ASSY_GEAR | KYD-MC412-000 |
| BELT | 6*3080*0.9 mm |
| PIN_HINGE | KYD-MC41U-000 |
| KIC ON BOARD | 6-10 CHANEL |
| SONY E1000 FILTER | 4-761-920-01 |
| PIN,HINGE | KYL-M860R-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| BOTTON | ZB6-EB3B |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| LEVER | KYB-M3T01-000 |
| SPRING_COMP | KYB-M91CS-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| DEK SQUEEGE | DEK-03T 长25CM |
| NOZZLE_SHAFT | KYF-M8619-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| POGO BLOCK | 0738A-0029 |
| POWER SUPPLY | 11632XA |
| NOZZLE | HG53G |
| ASSY,HOOK | KYD-MC40A-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| HELICAL SPRING | N210068065AA |
| PIN,HINGE | KYB-M3T31-000 |
| CORD,BCR | KYF-M86NC-000 |
| SENSOR | KYF-M8681-000 |
| 1220 NOZZLE | 51305323 |
| ASSY,LEVER | KYM-M864H-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| WASHER | 90990-37J010 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GUIDE | KYD-MC11T-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| SEAL | KYT-M862W-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| ROCK | 2-149-675-01 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| NPM 226CS NOZZLE | N610040783AB |
| GEAR | KYU-M868B-000 |
| LEVER | KYB-M3T33-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| GREASE FOR PANASONIC | N510048188AA |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| 904 NOZZLE | Y074-V904-0015 |
| COVER(RB) | KYM-M8612-000 |
| PCB-MOUNT | KYK-M861W-000 |
| COVER(LB) | KYM-M8657-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| BELT | 44548605 |
| ARM STEEL | N210007284AB |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| 933 NOZZLE | 00346523-03 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ASSY,GEAR | KYM-M862C-000 |
| BM02 NOZZLE | BM02 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
