Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
6301304953 / 216D0470 / KYD-MC61L-000 PIN_HINGE SMT Feeder Parts for Hitachi
| Part No | 6301304953 / 216D0470 / KYD-MC61L-000 |
| Part Name | PIN_HINGE |
| Condition | Compatible new |
| Material | Steel |
| Usage | Hitachi machine |
| Type | Smt Feeder part |
Hot sale stock list:
| NPM 185 NOZZLE | N610070338AB |
| VALVE | SY3240-5LZD |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| NOZZLE(WC01) | KYB-M77W1-100 |
| GEAR | KYD-MC21U-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| COUPLING | KYK-M86AW-000 |
| COVER | KYM-M860X-000 |
| ASSY,GEAR | KYM-M862C-000 |
| LINE-SENSOR | KYF-M8607-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| I/O CABLE,WIDE | 0938A-1007 |
| GEAR | KYU-M868B-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| SPRING_COMP | KYD-MCN41-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| GUIDE,LINEAR | LWHD12X3 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| SPRING_COMP | KYB-M91CS-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| Fuji Packing | PH00991 |
| YG12F BELT | KHY-M9129-00 |
| P_RCG_SCOPE | KYB-M730B-000 |
| CASE-CONN | KYF-M860Y-000 |
| VALVE | SY3120-MZD-C6-F2 |
| HNS,CORD | KYL-M8621-000 |
| 904 NOZZLE | Y074-V904-0015 |
| 935 NOZZLE | 00346524-03 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| BRACKET | KYL-M86KD-000/211FC709 |
| PCBA FIXTURE | FC150-130-60 |
| DEK SQUEEGE | DEK-03T 长25CM |
| CORD,BCR | KYF-M86NC-000 |
| PIN_HINGE | KYD-MC42S-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| WASHER | 90990-37J010 |
| UNIT,DRIVER | KYK-M860K-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| 340F NOZZLE | 45466934 |
| MOTOR_DC | KYD-MC410-000 |
| SEAL | KYB-M702B-000 |
| 938 NOZZLE | 00322592-05 |
| ACCESSORY,SV | KYL-M861C-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| NPM 235CS NOZZLE | N610043815AA |
| ASSY_TENSION | KYD-MC21N-000 |
| 234F NOZZLE | 45466931 |
| NOZZLE(VC74) | KYK-M7725-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| WASHER | KYD-MC22H-00 |
| ROLLER(B) | KYK-M86EM-000 |
| BLOCK | KYF-M867D-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| LEVER | KYB-M3T01-000 |
| CASE-CONN | KYK-M860Y-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| BALL | 4-719-920-01 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| KIC ON BOARD | 6-10 CHANEL |
| ASSY,LEVER | KYM-M864H-000 |
| SLIP RING | KYB-M7027-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| GEAR | KYD-MC424-000/223E0481 |
| SENSOR-PELEC | KYK-M861Y-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| MOTOR | KYA-M700R-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| VALVE | 4-187-212-01 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| NOZZLE(BA06) | KYB-M77A6-000 |
| PIN_HINGE | KYD-MC41U-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| BLOCK L3 | KYB-M960C-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| SEAL | KYT-M862W-000 |
| BELT | 6*3080*0.9 mm |
| COVER(MAK1-2) | KYD-MC11X-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| PIN,HINGE | KYD-MC41S-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| ASSY GEAR | KYD-MC211-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| CYLINDER | KYL-M869A-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| GEAR | 4-719-921-02 |
| NPM 226CS NOZZLE | N610040783AB |
| BELT_TIMING | KYA-M914W-000 |
| BELT | N510021326AA |
| POGO BLOCK | 0738A-0029 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| LEVER | KYB-M3T33-000 |
| BELT | 00334936S01 |
| PIN_LOCATE | KYD-MC132-000 |
| 360F NOZZLE | 45466917 |
| BELT | 44548605 |
| BM02 NOZZLE | BM02 |
| SONY1000 FILTER | 4-761-920-01 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| COUPLING | KYB-M702C-000 |
| PLATE | KYA-M3804-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| SPRING_COMP | KYD-MC129-000 |
| COVER(RB) | KYM-M8612-000 |
| PLATE | N610014970AE |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| GEAR | KYK-M864C-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| NPM H16 SENSON | N510054833AA |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| 1220 NOZZLE | 51305323 |
| FILTER | K46-M8527-COX |
| GT-24040B FEEDER | KYD-MCN00-00 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| RT BELT | 3-212-264-01 |
| GUIDE | KYD-MC11T-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| UNIT_DRIVER | KYK-M860F-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| VALVE | 2-673-684-01 |
| WASHER | 92902-03200 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| TIMING BELT | KYB-M919E-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| PIN-GAUGE | KXF00YHTA00 |
| HELICAL SPRING | N210068065AA |
| NPM 230C NOZZLE | N610040784AD |
| NOZZLE | HG53G |
| GEAR | KYD-MC23C-000/6301352305 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| NPM H16 SHAFT | N510064335AA |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| GREASE | N990PANA-023 |
| BELT | 6*3080*0.9 mm |
| PIN_LOCATE | KYD-MC137-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| COVER(LB) | KYM-M8657-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| FEEDER CABLE | KYL-M869D-000 |
| B-234 NOZZLE | 47561103-B-234 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| BELT | N510060977AA |
| LIGHTING_UNIT | KYB-M700T-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| COVER | KYK-M86RD-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| PCB-MOUNT | KYK-M861W-000 |
| SLIP RING | KYB-M7027-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| 933 NOZZLE | 00346523-03 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| SONY NOZZLE | CF25200 |
| SPRING_COMP | KYD-MC3T-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| ASSY_GEAR | KYD-MC412-000 |
| PIPE FITTING | 630 048 4656 |
| BLOCK | KYA-M7027-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| COVER(RB) | KYD-MC10L-000 |
| ASSY_LEVER | KYD-MC212-000 |
| SENSOR | KYF-M8681-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| POWER SUPPLY | 11632XA |
| GEAR | KYD-MC153-00 |
| NPM X479 VALVE | N510054843AA |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| NPM FILTER | N610097899AA |
| CPK JG0250 | CPK JG0250 |
| DRIVER | N510002593AA |
| GEAR | KYD-MC23C-00 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| ROCK | 2-149-675-01 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| DD MOTOR | KYF-M860E-000 |
| Encoder Read Head For Universal | 49566101 |
| SDD Hard Disk | N610059692AA |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| NOZZLE_HV14C | KYA-M7714-000 |
| WASHER | 92902-03100 |
| NPM 240C NOZZLE | N610062681AD |
| LEVER | KYB-M3T0M-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| ARM STEEL | N210007284AB |
| SPRING | P/N:0730C-0252 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| GRIP | KYD-MC109-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| LEVER | KYK-M861V-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| NPM 235C NOZZLE | N610043814AD |
| NOZZLE(HB04C) | KYB-M7721-100 |
| GREASE FOR PANASONIC | N510048188AA |
| PIN-GAUGE | KXF00YHUA00 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| COUPLING | KYB-M7116-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| SEAL | KYB-M704E-000 |
| POWER SUPPLY | 1-474-020-11 |
| ASSY,LEVER | KYM-M8648-000 |
| GEAR | KYD-MC20K-00 |
| GT38080 FEEDER | GT38080 FEEDER |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| LEVER | KYB-M3T21-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| SPRING COMP | KYD-MC13T-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| DSP-2008K SQUEEGE | L:20CM |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| ETC MOTOR | PK2K93S-2D |
| SONY E1000 FILTER | 4-761-920-01 |
| PIN,HINGE | KYB-M3T31-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| NOZZLE_HG52C | KYA-M7705-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| GXH-1 FILTER | KYL-M860S-000 |
| SONY NOZZEL | AF10071 |
| TOOL | N510031628AA |
| DISK | KYB-M3T1A-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| 937 NOZZLE | 00322591-06 |
| PIN_LOCATE | KYD-MC21Y-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| Fuji Filter | AA1FZ04 |
| YG12 BELT | KHY-M9129-10 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| FUSE | KYL-M86KH-000 |
| LEVER | KYB-M3T22-000 |
| HOLDER | KYB-M701R-000 |
| UNIT,I/O | KYL-M86LV-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| LEVER | KYK-M86LV-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| BOTTON | ZB6-EB3B |
| MACHINE SCREW | KYD-MC14G-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| CAM FOLLOWER | KYB-M704A-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| BELT | N510065133AA |
| SONY NOZZEL AF12082 | AF12082 |
| NPM 230CS NOZZLE | N610040788AD |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| FAN | 1204KL-04W-B59 |
| MICRO METER | 350-251-30 |
| ASSY GRIP | KYD-MC21H-000 |
| BELT TIMING | KYA-M9152-000 |
| PIN,HINGE | KYL-M860R-000 |
| FEEDER | GD38080 |
| COGNEX BOARD | KYK-M86PW-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| GXH SPECIAL NOZZLE | 13053 |
| SPRING COMP | KYD-MC422-000 |
| FFU | MX--575-A |
| COVER ASSY | X-4700-067-4 |
| BLOCK | KYL-M86KC-000/211G5472 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| NPM H8 SENSON | N510048691AA |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
