Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KW1-M114S-010 TAPE GUIDE ASSY SMT Feeder Parts for YAMAHA
| Part No | KW1-M114S-010 |
| Part Name | TAPE GUIDE ASSY |
| Condition | Compatible new |
| Material | Steel |
| Usage | Yamaha machine |
| Type | Smt feeder part |
Hot sale stock list:
| NOZZLE_SHAFT | KYF-M8619-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GEAR | KYD-MC21U-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| NOZZLE_HV19C | KYA-M7719-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| BELT | N510060977AA |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| GREASE FOR PANASONIC | N510048188AA |
| BELT | 6*3080*0.9 mm |
| COVER(RB) | KYM-M8612-000 |
| ROLLER(B) | KYK-M86EM-000 |
| VALVE | SY3120-MZD-C6-F2 |
| COUPLING | KYB-M702C-000 |
| NPM FILTER | N610097899AA |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| GEAR | 4-719-921-02 |
| WASHER | 90990-37J010 |
| WASHER | 92902-03100 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| LEVER | KYK-M861V-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| POWER SUPPLY | 11632XA |
| NPM 240C NOZZLE | N610062681AD |
| BELT | N510021326AA |
| P_RCG_SCOPE | KYB-M730B-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| BLOCK | KYF-M867D-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| NPM H8 SENSON | N510048691AA |
| ASSY,GEAR | KYM-M862C-000 |
| BLOCK | KYA-M7027-000 |
| ETC MOTOR | PK2K93S-2D |
| SONY NOZZEL AF12082 | AF12082 |
| BLOCK L3 | KYB-M960C-000 |
| POWER SUPPLY | 1-474-020-11 |
| CORD,BCR | KYF-M86NC-000 |
| GEAR | KYK-M864C-000 |
| NPM H16 SENSON | N510054833AA |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| PCB-MOUNT | KYK-M861W-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| PLATE | N610014970AE |
| DD MOTOR | KYF-M860E-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| MICRO METER | 350-251-30 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| COVER (12/16mm) | KYD-MC20Y-000 |
| ASSY_GEAR | KYD-MC412-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| RT BELT | 3-212-264-01 |
| PIN,HINGE | KYB-M3T31-000 |
| ARM STEEL | N210007284AB |
| UNIT-DRIVER | KYK-M861A-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| CASE-CONN | KYK-M860Y-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| COUPLING | KYK-M86AW-000 |
| PIN-GAUGE | KXF00YHUA00 |
| GUIDE,LINEAR | KYK-M860S-000 |
| LEVER | KYB-M3T33-000 |
| SPRING COMP | KYD-MC422-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| BOLT-HEX-SCT | 90990-01J115 |
| ASSY_CABLE | KYL-M86NC-000 |
| PIN,HINGE | KYL-M860R-000 |
| CYLINDER | KYL-M869A-000 |
| BELT | 44548605 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| NPM 235C NOZZLE | N610043814AD |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| GEAR | KYD-MC23C-000/6301352305 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| PIN_HINGE | KYD-MC41U-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| TIMING BELT | KYB-M919E-000 |
| VALVE | 4-187-212-01 |
| COVER | KYK-M86RD-000 |
| 340F NOZZLE | 45466934 |
| SONY MOTHER BOARD | 1-797-651-12 |
| SONY NOZZEL | AF10071 |
| SPRING_COMP | KYD-MCN41-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| NPM 185 NOZZLE | N610070338AB |
| YG12F BELT | KHY-M9129-00 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| MOTOR | KYA-M700R-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| 234F NOZZLE | 45466931 |
| GEAR | KYD-MC23C-00 |
| NPM 230C NOZZLE | N610040784AD |
| PIN_LOCATE | KYD-MC21Y-000 |
| 935 NOZZLE | 00346524-03 |
| LEVER | KYB-M3T21-000 |
| 904 NOZZLE | Y074-V904-0015 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| GREASE | N990PANA-023 |
| SDD Hard Disk | N610059692AA |
| FFU | MX--575-A |
| PIPE FITTING | 630 048 4656 |
| NOZZLE_HG52C | KYA-M7705-000 |
| SLIP RING | KYB-M7027-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| WASHER | KYD-MC22H-00 |
| NOZZLE_HV13C | KYA-M7713-000 |
| 933 NOZZLE | 00346523-03 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| Fuji Packing | PH00991 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| SHAFT ASSY. | KYF-M864U-000 |
| Encoder Read Head For Universal | 49566101 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| PIN-GAUGE | KXF00YHTA00 |
| GEAR | KYU-M868B-000 |
| ASSY,LEVER | KYM-M864H-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| SPRING COMP | KYD-MC13T-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| COVER(HIRA-1) | KYD-MC20X-000 |
| 937 NOZZLE | 00322591-06 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| ASSY GEAR | KYD-MC211-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| NOZZLE_HV14C | KYA-M7714-000 |
| BELT | 00334936S01 |
| NPM 230CS NOZZLE | N610040788AD |
| NPM H16 SHAFT | N510064335AA |
| PIN,HINGE | KYB-M3T2Y-000 |
| KIC ON BOARD | 6-10 CHANEL |
| ASSY_SHAFT | KYF-M8651-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| FEEDER | GD38080 |
| BM02 NOZZLE | BM02 |
| 1220 NOZZLE | 51305323 |
| PIN,HINGE | KYD-MC41S-000 |
| DRIVER | N510002593AA |
| HNS,CORD | KYL-M8621-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| POGO BLOCK | 0738A-0029 |
| UNIT,I/O | KYL-M86LV-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| MOTOR_DC | KYD-MC410-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| MACHINE SCREW | KYD-MC14G-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| VALVE | 2-673-684-01 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| FUSH-SPECIAL | KYF-M860F-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| GXH SPECIAL NOZZLE | 13053 |
| FEEDER CABLE | KYL-M869D-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| NOZZLE_HG33C | KYA-M7703-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| PIN_LOCATE | KYD-MC132-000 |
| LINE-SENSOR | KYF-M8607-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| PCBA FIXTURE | FC150-130-60 |
| NPM 226CS NOZZLE | N610040783AB |
| PIN,LOCATE | KYD-MCN3N-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| ACCESSORY,SV | KYL-M861C-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| COVER(RB) | KYD-MC10L-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| COUPLING | KYB-M7116-000 |
| SLIP RING | KYB-M7027-000 |
| NPM X479 VALVE | N510054843AA |
| SENSOR,PELEC | KYK-M86DE-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| ASSY,LEVER | KYM-M8648-000 |
| DISK | KYB-M3T1A-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| GT38080 FEEDER | GT38080 FEEDER |
| Fuji Filter | AA1FZ04 |
| GEAR | KYD-MC20K-00 |
| COVER ASSY | X-4700-067-4 |
| NOZZLE(VC74) | KYK-M7725-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| PLATE | KYA-M3804-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| YG12 BELT | KHY-M9129-10 |
| TOOL | N510031628AA |
| NOZZLE(FF01) | KYB-M77F1-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| ASSY_LEVER | KYD-MC212-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| ASSY,HOOK | KYD-MC40A-000 |
| FAN | 1204KL-04W-B59 |
| WASHER | 92902-03200 |
| ASSY_GEAR | KYD-MC40F-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| CPK JG0250 | CPK JG0250 |
| 938 NOZZLE | 00322592-05 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| GEAR | KYD-MC424-000/223E0481 |
| GXH-1 FILTER | KYL-M860S-000 |
| SENSOR | KYF-M8681-000 |
| NOZZLE | HG53G |
| NPM 235CS NOZZLE | N610043815AA |
| PULLEY_TIMING | KYB-M91AL-000 |
| BALL | 4-719-920-01 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| HELICAL SPRING | N210068065AA |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| BOTTON | ZB6-EB3B |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| ASSY GRIP | KYD-MC21H-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| PIN_LOCATE | KYD-MC137-000 |
| HOLDER | KYB-M701R-000 |
| PIN_HINGE | KYD-MC42S-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| 360F NOZZLE | 45466917 |
| LEVER | KYB-M3T22-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| ROCK | 2-149-675-01 |
| ASSY_GEAR | KYD-MC11A-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| GUIDE | KYD-MC11T-000 |
| SEAL | KYT-M862W-000 |
| FILTER | K46-M8527-COX |
| LEVER | KYB-M3T01-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| LEVER | KYK-M86LV-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| SPRING_COMP | KYD-MC129-000 |
| VALVE | SY3240-5LZD |
| NOZZLE(FA06) | KYB-M77F6-000 |
| COVER(LB) | KYM-M8657-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| BELT | 6*3080*0.9 mm |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| BUCK_UP_PIN | KYA-M3802-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| BELT | N510065133AA |
| DSP-2008K SQUEEGE | L:20CM |
| CAM FOLLOWER | KYB-M704A-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| CASE-CONN | KYF-M860Y-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| LEVER | KYB-M3T0M-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| HNS,LIGHTING | KYF-M861W-000 |
| GEAR | KYD-MC153-00 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| GUIDE,LINEAR | LWHD12X3 |
| SONY NOZZLE | CF25200 |
| BELT_TIMING | KYA-M914W-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| GRIP | KYD-MC109-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| SPRING | P/N:0730C-0252 |
| COVER | KYM-M860X-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| SEAL | KYB-M702B-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| FUSE | KYL-M86KH-000 |
| SPRING_COMP | KYD-MC3T-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| SEAL | KYB-M704E-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| SONY1000 FILTER | 4-761-920-01 |
| B-234 NOZZLE | 47561103-B-234 |
| SPRING_COMP | KYB-M91CS-000 |
| BELT TIMING | KYA-M9152-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
