Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
630 165 7417 / 016S1007 / KYM-M864H-000 ASSY LEVER Smt Feeder Parts for Hitachi
| Part No | 630 165 7417 / 016S1007 / KYM-M864H-000 |
| Part Name | ASSY LEVER |
| Condition | Compatible new |
| Material | iron |
| Usage | Hitachi machine |
| Type | SMT Feeder part |
Hot sale stock list:
| RT BELT | 3-212-264-01 |
| NPM X479 VALVE | N510054843AA |
| VALVE | SY3240-5LZD |
| NOZZLE(FA05) | KYB-M77F5-000 |
| COVER(RB) | KYD-MC10L-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| YG12 BELT | KHY-M9129-10 |
| 234F NOZZLE | 45466931 |
| LEVER | KYB-M3T0M-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| 360F NOZZLE | 45466917 |
| GERA(HASUBA) | KYD-MC131-000 |
| 904 NOZZLE | Y074-V904-0015 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| SEAL | KYB-M704E-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| NOZZLE_HG82C | KYA-M7708-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| BELT | 00334936S01 |
| B-234 NOZZLE | 47561103-B-234 |
| GUIDE,LINEAR | KYK-M860S-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| SPRING COMP | KYD-MC422-000 |
| POWER SUPPLY | 1-474-020-11 |
| DISK | KYB-M3T1A-000 |
| ROCK | 2-149-675-01 |
| PIN,HINGE | KYL-M860R-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| FFU | MX--575-A |
| GREASE | N990PANA-023 |
| POGO BLOCK | 0738A-0029 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| BELT_TIMING | KYA-M914W-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| SEAL | KYT-M862W-000 |
| WASHER | 92902-03100 |
| PIN,HINGE | KYB-M3T2Y-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| COUPLING | KYB-M702C-000 |
| VALVE | 2-673-684-01 |
| NPM 235CS NOZZLE | N610043815AA |
| GUIDE,LINEAR | LWHD12X3 |
| PIN_LOCATE | KYD-MC21Y-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| NPM 230C NOZZLE | N610040784AD |
| GREASE FOR PANASONIC | N510048188AA |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| SONY NOZZEL AF12082 | AF12082 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| SPRING COMP | KYD-MC13T-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| BLOCK | KYF-M867D-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| DSP-2008K SQUEEGE | L:20CM |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| WASHER | 92902-03200 |
| HNS,LIGHTING | KYF-M861W-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| SPRING_COMP | KYD-MC3T-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| FEEDER | GD38080 |
| UNIT_DRIVER | KYK-M860F-000 |
| PIN-GAUGE | KXF00YHUA00 |
| ASSY,LEVER | KYM-M864H-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| SDD Hard Disk | N610059692AA |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ASSY,LEVER | KYM-M8648-000 |
| CORD,BCR | KYF-M86NC-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| SONY NOZZLE | CF25200 |
| WASHER | KYD-MC22H-00 |
| SONY NOZZEL | AF10071 |
| GEAR | KYD-MC20K-00 |
| ASSY_LEVER | KYD-MC212-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| VALVE | SY3120-MZD-C6-F2 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| CYLINDER | KYL-M869A-000 |
| SONY1000 FILTER | 4-761-920-01 |
| ASSY GRIP | KYD-MC21H-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| KIC ON BOARD | 6-10 CHANEL |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| GEAR | KYU-M868B-000 |
| COUPLING | KYK-M86AW-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| NPM H16 SENSON | N510054833AA |
| SENSOR-PELEC | KYK-M861Y-000 |
| TOOL | N510031628AA |
| NOZZLE_HG52C | KYA-M7705-000 |
| GEAR | KYD-MC21U-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| PIN,LOCATE | KYD-MCN3N-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| SLIP RING | KYB-M7027-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| FEEDER CABLE | KYL-M869D-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| PCB-MOUNT | KYK-M861W-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| P_RCG_SCOPE | KYB-M730B-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| Fuji Filter | AA1FZ04 |
| SPRING_COMP | KYB-M91CS-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| POWER SUPPLY | 11632XA |
| DD MOTOR | KYF-M860E-000 |
| NPM H8 SENSON | N510048691AA |
| BOLT-HEX-SCT | 90990-01J115 |
| SPRING_COMP | KYD-MC129-000 |
| PIN_LOCATE | KYD-MC137-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| ASSY_GEAR | KYD-MC11A-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| HELICAL SPRING | N210068065AA |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| HOLDER | KYB-M701R-000 |
| GEAR | KYD-MC424-000/223E0481 |
| NPM H16 SHAFT | N510064335AA |
| LEVER | KYB-M3T22-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| YG12F BELT | KHY-M9129-00 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| NPM 226CS NOZZLE | N610040783AB |
| LEVER | KYB-M3T21-000 |
| COVER(LB) | KYM-M8657-000 |
| ASSY GEAR | KYD-MC211-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| BLOCK | KYA-M7027-000 |
| TIMING BELT | KYB-M919E-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| NOZZLE(VC74) | KYK-M7725-000 |
| MOTOR_DC | KYD-MC410-000 |
| GRIP | KYD-MC109-000 |
| VALVE | 4-187-212-01 |
| LIGHTING_UNIT | KYB-M700T-000 |
| LEVER | KYK-M86LV-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| BELT | 6*3080*0.9 mm |
| BELT | N510021326AA |
| SLIP RING | KYB-M7027-000 |
| MICRO METER | 350-251-30 |
| GEAR | 4-719-921-02 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| COVER ASSY | X-4700-067-4 |
| Fuji Packing | PH00991 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| BELT | N510065133AA |
| UNIT,I/O | KYL-M86LV-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| LEVER | KYB-M3T01-000 |
| ROLLER(B) | KYK-M86EM-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| SPRING_COMP | KYD-MCN41-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| 1220 NOZZLE | 51305323 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| FUSE | KYL-M86KH-000 |
| PCBA FIXTURE | FC150-130-60 |
| WASHER | 90990-37J010 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| NPM 230CS NOZZLE | N610040788AD |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| CASE-CONN | KYK-M860Y-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| BELT | 6*3080*0.9 mm |
| HOLDER | KYB-M702F-000/0916DK2D |
| NOZZLE_HV19C | KYA-M7719-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| LINE-SENSOR | KYF-M8607-000 |
| ASSY,GEAR | KYM-M862C-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| PIN,HINGE | KYD-MC41S-000 |
| GEAR | KYD-MC153-00 |
| ASSY_CABLE | KYL-M86NC-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| COVER(RB) | KYM-M8612-000 |
| GEAR | KYD-MC23C-00 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| NOZZLE | HG53G |
| FILTER | K46-M8527-COX |
| PIN,HINGE | KYB-M3T31-000 |
| FAN | 1204KL-04W-B59 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| PIN-GAUGE | KXF00YHTA00 |
| NPM 235C NOZZLE | N610043814AD |
| ASSY_GEAR | KYD-MC412-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| MOTOR | KYA-M700R-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| 935 NOZZLE | 00346524-03 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| SPRING | P/N:0730C-0252 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| SEAL | KYB-M702B-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| BM02 NOZZLE | BM02 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| 938 NOZZLE | 00322592-05 |
| BELT | N510060977AA |
| ASSY,HOOK | KYD-MC40A-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| Encoder Read Head For Universal | 49566101 |
| ASSY_TENSION | KYD-MC21N-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| BELT TIMING | KYA-M9152-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| PIPE FITTING | 630 048 4656 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| GXH-1 FILTER | KYL-M860S-000 |
| PLATE | N610014970AE |
| NOZZLE_HG33C | KYA-M7703-000 |
| ETC MOTOR | PK2K93S-2D |
| GXH SPECIAL NOZZLE | 13053 |
| 933 NOZZLE | 00346523-03 |
| BLOCK L3 | KYB-M960C-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| GEAR | KYK-M864C-000 |
| COUPLING | KYB-M7116-000 |
| DRIVER | N510002593AA |
| CPK JG0250 | CPK JG0250 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| GUIDE | KYD-MC11T-000 |
| LEVER | KYK-M861V-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| GEAR | KYD-MC23C-000/6301352305 |
| SENSOR | KYF-M8681-000 |
| LEVER | KYB-M3T33-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| CASE-CONN | KYF-M860Y-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| COVER | KYM-M860X-000 |
| PIN_LOCATE | KYD-MC132-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| COVER | KYK-M86RD-000 |
| BALL | 4-719-920-01 |
| NPM 240C NOZZLE | N610062681AD |
| MOTOR_DC | KYD-MCN2G-000 |
| HNS,CORD | KYL-M8621-000 |
| PIN_HINGE | KYD-MC42S-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| NPM 185 NOZZLE | N610070338AB |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| BOTTON | ZB6-EB3B |
| NPM FILTER | N610097899AA |
| PLATE | KYA-M3804-000 |
| 937 NOZZLE | 00322591-06 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| 340F NOZZLE | 45466934 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| UNIT,DRIVER | KYK-M860K-000 |
| BELT | 44548605 |
| ARM STEEL | N210007284AB |
| SHROUDED POGO BLOCK | 0938A-0007 |
| PIN_HINGE | KYD-MC41U-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
