Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYD-MC21N-000 / 0926221D ASSY TENSION Smt Feeder Parts for Hitachi Machine Feeder
| Part No | 0926221D KYD-MC21N-000 |
| Part Name | Assy Tension |
| Condition | Compatible new |
| Material | Steel |
| Usage | SMT Hitachi Machine Feeder |
| Type | SMT Hitachi Machine Feeder Parts |
Hot sale stock list:
| NOZZLE_HV14C | KYA-M7714-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| NPM FILTER | N610097899AA |
| NPM 185 NOZZLE | N610070338AB |
| NOZZLE(FF01) | KYB-M77F1-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| PIN,LOCATE | KYD-MCN3N-000 |
| GREASE FOR PANASONIC | N510048188AA |
| PIN,HINGE | KYD-MC41S-000 |
| HNS,CORD | KYL-M8621-000 |
| SPRING_COMP | KYD-MC129-000 |
| FFU | MX--575-A |
| COVER ASSY | X-4700-067-4 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| SONY NOZZEL AF12082 | AF12082 |
| PIN,HINGE | KYL-M860R-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| SPRING | P/N:0730C-0252 |
| NPM 240C NOZZLE | N610062681AD |
| COVER(LB) | KYM-M8657-000 |
| VALVE | SY3120-MZD-C6-F2 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| CYLINDER | KYL-M869A-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| PIPE FITTING | 630 048 4656 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| 935 NOZZLE | 00346524-03 |
| GRIP | KYD-MC109-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| DRIVER | N510002593AA |
| NOZZLE_HV13C | KYA-M7713-000 |
| DSP-2008K SQUEEGE | L:20CM |
| LIGHTING_UNIT | KYB-M700T-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| 234F NOZZLE | 45466931 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| SONY NOZZEL | AF10071 |
| DD MOTOR | KYF-M860E-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| POGO BLOCK | 0738A-0029 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| BELT | N510065133AA |
| WASHER | KYD-MC22H-00 |
| GEAR | KYD-MC153-00 |
| MOTOR | KYA-M700R-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| GXH SPECIAL NOZZLE | 13053 |
| SPRING COMP | KYD-MC13T-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| PIN-GAUGE | KXF00YHUA00 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| PIN_LOCATE | KYD-MC137-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| SENSOR-PELEC | KYK-M861Y-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| SEAL | KYB-M702B-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| Fuji Filter | AA1FZ04 |
| NPM H16 SHAFT | N510064335AA |
| GEAR | KYD-MC23C-000/6301352305 |
| COVER(RB) | KYM-M8612-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| HELICAL SPRING | N210068065AA |
| Fuji Packing | PH00991 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| ASSY GRIP | KYD-MC21H-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| DISK | KYB-M3T1A-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| BALL | 4-719-920-01 |
| HV31 NOZZLE | KYL-M7718-000 |
| TOOL | N510031628AA |
| VALVE | 4-187-212-01 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| SENSOR,PELEC | KYL-M86HL-000 |
| BLOCK | KYA-M7027-000 |
| NPM 226CS NOZZLE | N610040783AB |
| HNS,LIGHTING | KYF-M861W-000 |
| PIN_HINGE | KYD-MC41U-000 |
| WASHER | 90990-37J010 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY_LEVER | KYD-MC212-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| NPM H8 SENSON | N510048691AA |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| FEEDER | GD38080 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| ASSY_TENSION | KYD-MC21N-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY_GEAR | KYD-MC412-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| PLATE | KYA-M3804-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| FUSE | KYL-M86KH-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| SPRING_COMP | KYD-MC3T-000 |
| BELT | 00334936S01 |
| GEAR | KYD-MC20K-00 |
| NOZZLE(VC74) | KYK-M7725-000 |
| NPM H16 SENSON | N510054833AA |
| SENSOR,PELEC | KYK-M86DE-000 |
| ROCK | 2-149-675-01 |
| SONY NOZZLE | CF25200 |
| LEVER | KYB-M3T21-000 |
| ROLLER(B) | KYK-M86EM-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GEAR | KYU-M868B-000 |
| GREASE | N990PANA-023 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| COGNEX BOARD | KYK-M86PW-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| 937 NOZZLE | 00322591-06 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| COUPLING | KYK-M86AW-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| SHAFT ASSY. | KYF-M864U-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| MOTOR_DC | KYD-MC410-000 |
| CORD,BCR | KYF-M86NC-000 |
| WASHER | 92902-03200 |
| FEEDER CABLE | KYL-M869D-000 |
| LEVER | KYK-M86LV-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| ASSY GEAR | KYD-MC211-000 |
| NPM 230CS NOZZLE | N610040788AD |
| BOTTON | ZB6-EB3B |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| ASSY,GEAR | KYM-M862C-000 |
| POWER SUPPLY | 1-474-020-11 |
| FUSH-SPECIAL | KYF-M860F-000 |
| 1220 NOZZLE | 51305323 |
| WASHER | 92902-03100 |
| POWER SUPPLY | 11632XA |
| SPRING_COMP | KYD-MCN41-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| UNIT_DRIVER | KYK-M860F-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| GEAR | KYK-M864C-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| SONY1000 FILTER | 4-761-920-01 |
| NPM 235C NOZZLE | N610043814AD |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| PIN-GAUGE | KXF00YHTA00 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| LINE-SENSOR | KYF-M8607-000 |
| BELT | N510060977AA |
| COVER | KYM-M860X-000 |
| BELT | 6*3080*0.9 mm |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| GT38080 FEEDER | GT38080 FEEDER |
| PIN_LOCATE | KYD-MC132-000 |
| CASE-CONN | KYK-M860Y-000 |
| FAN | 1204KL-04W-B59 |
| BUSH,BEARING | KYB-M3T3S-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| LEVER | KYB-M3T01-000 |
| SPRING_COMP | KYB-M91CS-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| Encoder Read Head For Universal | 49566101 |
| SENSOR,PELEC | KYL-M8609-000 |
| SEAL | KYB-M704E-000 |
| RT BELT | 3-212-264-01 |
| GEAR | 4-719-921-02 |
| SPRING COMP | KYD-MC422-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| TAIL PIVOT | P/N:0740C-0109 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| PIN_HINGE | KYD-MC42S-000 |
| NPM X479 VALVE | N510054843AA |
| GEAR | KYD-MC23C-00 |
| ASSY,LEVER | KYM-M864H-000 |
| SLIP RING | KYB-M7027-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| VALVE | SY3240-5LZD |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| NPM 230C NOZZLE | N610040784AD |
| BLOCK | KYL-M86KC-000/211G5472 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| CPK JG0250 | CPK JG0250 |
| MICRO METER | 350-251-30 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| SEAL | KYT-M862W-000 |
| ETC MOTOR | PK2K93S-2D |
| BM02 NOZZLE | BM02 |
| BLOCK L3 | KYB-M960C-000 |
| SLIP RING | KYB-M7027-000 |
| LEVER | KYB-M3T33-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| BELT_TIMING | KYA-M914W-000 |
| PIN,HINGE | KYB-M3T31-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| GEAR | KYD-MC21U-000 |
| LEVER | KYB-M3T22-000 |
| BELT | 44548605 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| YG12F BELT | KHY-M9129-00 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| MACHINE SCREW | KYD-MC14G-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| LEVER | KYB-M3T0M-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| SDD Hard Disk | N610059692AA |
| BELT | 6*3080*0.9 mm |
| GUIDE,LINEAR | LWHD12X3 |
| COUPLING | KYB-M7116-000 |
| NPM 235CS NOZZLE | N610043815AA |
| COVER (12/16mm) | KYD-MC20Y-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| PCBA FIXTURE | FC150-130-60 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| COVER(RB) | KYD-MC10L-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| BLOCK | KYF-M867D-000 |
| NOZZLE | HG53G |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| CASE-CONN | KYF-M860Y-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| NOZZLE_HG33C | KYA-M7703-000 |
| UNIT,I/O | KYL-M86LV-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| KIC ON BOARD | 6-10 CHANEL |
| 933 NOZZLE | 00346523-03 |
| 360F NOZZLE | 45466917 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| PLATE | N610014970AE |
| B-234 NOZZLE | 47561103-B-234 |
| BELT TIMING | KYA-M9152-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| LEVER | KYK-M861V-000 |
| GUIDE | KYD-MC11T-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| COVER | KYK-M86RD-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| 904 NOZZLE | Y074-V904-0015 |
| HOLDER | KYB-M701R-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| PCB-MOUNT | KYK-M861W-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| COUPLING | KYB-M702C-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| TIMING BELT | KYB-M919E-000 |
| YG12 BELT | KHY-M9129-10 |
| GEAR | KYD-MC424-000/223E0481 |
| ASSY_CABLE | KYL-M86NC-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| FILTER | K46-M8527-COX |
| BELT | N510021326AA |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| 938 NOZZLE | 00322592-05 |
| GXH-1 FILTER | KYL-M860S-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| ARM STEEL | N210007284AB |
| SENSOR | KYF-M8681-000 |
| VALVE | 2-673-684-01 |
| 340F NOZZLE | 45466934 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ASSY,LEVER | KYM-M8648-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
