Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
6301265742 / 211A8627 / KYM-M863E-000 COVER Smt Feeder Parts for Hitachi
| Condition | 630 126 5742 / 211A8627 / KYM-M863E-000 |
| Part Name | Cover |
| Condition | Original news or Compatible new |
| Material | steel |
| Usage | Hitachi Machine |
| Type | SMT Feeder part |
Hot sale stock list:
| CYLINDER | KYL-M869A-000 |
| PIN-GAUGE | KXF00YHTA00 |
| BELT | 00334936S01 |
| CORD,BCR | KYF-M86NC-000 |
| SPRING_COMP | KYD-MCN41-000 |
| FFU | MX--575-A |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| ASSY_GEAR | KYD-MC412-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| HOLDER | KYB-M701R-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| BELT | N510060977AA |
| PIN,HINGE | KYB-M3T31-000 |
| 933 NOZZLE | 00346523-03 |
| COVER | KYK-M86RD-000 |
| BLOCK | KYA-M7027-000 |
| LEVER | KYB-M3T22-000 |
| DSP-2008K SQUEEGE | L:20CM |
| NOZZLE(HB03C) | KYB-M7720-100 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| Fuji Packing | PH00991 |
| FEEDER CABLE | KYL-M869D-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NPM 185 NOZZLE | N610070338AB |
| SEAL | KYB-M704E-000 |
| NPM X479 VALVE | N510054843AA |
| BM02 NOZZLE | BM02 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| PCBA FIXTURE | FC150-130-60 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| I/O CABLE,WIDE | 0938A-1007 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| ASSY GRIP | KYD-MC21H-000 |
| LEVER | KYK-M86LV-000 |
| ASSY,LEVER | KYM-M864H-000 |
| PIN,HINGE | KYL-M860R-000 |
| Encoder Read Head For Universal | 49566101 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| VALVE | 4-187-212-01 |
| SLIP RING | KYB-M7027-000 |
| GEAR | KYD-MC20K-00 |
| COVER(RB) | KYD-MC10L-000 |
| COUPLING | KYB-M7116-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| PULLEY_TIMING | KYB-M91AL-000 |
| 234F NOZZLE | 45466931 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| POWER SUPPLY | 11632XA |
| BELT | N510065133AA |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| HNS,CORD | KYL-M8621-000 |
| VALVE | 2-673-684-01 |
| SEAL | KYT-M862W-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| PLATE | KYA-M3804-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| MOTOR | KYA-M700R-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| NPM 226CS NOZZLE | N610040783AB |
| UNIT,DRIVER | KYK-M860K-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| FILTER | K46-M8527-COX |
| SENSOR | KYF-M8681-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| NPM FILTER | N610097899AA |
| BLOCK L3 | KYB-M960C-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| LEVER | KYK-M861V-000 |
| LEVER | KYB-M3T0M-000 |
| 904 NOZZLE | Y074-V904-0015 |
| MACHINE SCREW | KYD-MC14G-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| TIMING BELT | KYB-M919E-000 |
| PIN_LOCATE | KYD-MC132-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| FEEDER | GD38080 |
| GEAR | KYD-MC153-00 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| VALVE | SY3240-5LZD |
| NOZZLE | HG53G |
| SENSOR,PELEC | KYL-M86HL-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| PIPE FITTING | 630 048 4656 |
| SPRING COMP | KYD-MC422-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| FAN | 1204KL-04W-B59 |
| SONY1000 FILTER | 4-761-920-01 |
| ASSY_GEAR | KYD-MC11A-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| POWER SUPPLY | 1-474-020-11 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| YG12F BELT | KHY-M9129-00 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| SPRING COMP | KYD-MC13T-000 |
| VALVE | SY3120-MZD-C6-F2 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| GEAR | KYU-M868B-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| PIN,HINGE | KYD-MC41S-000 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| COVER(LB) | KYM-M8657-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| YG12 BELT | KHY-M9129-10 |
| PLATE | N610014970AE |
| KIC ON BOARD | 6-10 CHANEL |
| WASHER | KYD-MC22H-00 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| PIN,LOCATE | KYD-MCN3N-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| ARM STEEL | N210007284AB |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| BELT_TIMING | KYA-M914W-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| 1220 NOZZLE | 51305323 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| GERA(HASUBA) | KYD-MC131-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| MOTOR_DC | KYD-MCN2G-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| COUPLING | KYB-M702C-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| PIN_HINGE | KYD-MC41U-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| SPRING_COMP | KYB-M91CS-000 |
| DRIVER | N510002593AA |
| ASSY,HOOK | KYD-MC40A-000 |
| GRIP | KYD-MC109-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| NOZZLE_HV19C | KYA-M7719-000 |
| TOOL | N510031628AA |
| CAM FOLLOWER | KYB-M704A-000 |
| CPK JG0250 | CPK JG0250 |
| HOLDER | KYB-M702F-000/0916DK2D |
| LINE-SENSOR | KYF-M8607-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| WASHER | 92902-03200 |
| GUIDE,LINEAR | KYF-M867P-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| COGNEX BOARD | KYK-M86PW-000 |
| MICRO METER | 350-251-30 |
| BOTTON | ZB6-EB3B |
| 340F NOZZLE | 45466934 |
| WASHER | 92902-03100 |
| Fuji Filter | AA1FZ04 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| SPRING_COMP | KYD-MC129-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| WASHER | 90990-37J010 |
| B-234 NOZZLE | 47561103-B-234 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| LEVER | KYB-M3T33-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| 938 NOZZLE | 00322592-05 |
| POGO BLOCK | 0738A-0029 |
| NPM H16 SENSON | N510054833AA |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| GEAR | 4-719-921-02 |
| SDD Hard Disk | N610059692AA |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| NOZZLE_HV14C | KYA-M7714-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| SONY NOZZLE | CF25200 |
| NPM 235CS NOZZLE | N610043815AA |
| BELT | 6*3080*0.9 mm |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| RT BELT | 3-212-264-01 |
| GXH-1 FILTER | KYL-M860S-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| DISK | KYB-M3T1A-000 |
| 937 NOZZLE | 00322591-06 |
| NPM 235C NOZZLE | N610043814AD |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| NPM 230CS NOZZLE | N610040788AD |
| PIN_LOCATE | KYD-MC137-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| 935 NOZZLE | 00346524-03 |
| COUPLING | KYK-M86AW-000 |
| COVER | KYM-M860X-000 |
| ASSY_LEVER | KYD-MC212-000 |
| SPRING | P/N:0730C-0252 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| BELT TIMING | KYA-M9152-000 |
| NPM H8 SENSON | N510048691AA |
| ROLLER(B) | KYK-M86EM-000 |
| CASE-CONN | KYF-M860Y-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| PIN-GAUGE | KXF00YHUA00 |
| GEAR | KYD-MC424-000/223E0481 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| GREASE | N990PANA-023 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| COVER(MAK1-2) | KYD-MC11X-000 |
| GREASE FOR PANASONIC | N510048188AA |
| SPRING_COMP | KYD-MC3T-000 |
| SONY NOZZEL AF12082 | AF12082 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| BLOCK | KYF-M867D-000 |
| SEAL | KYB-M702B-000 |
| MOTOR_DC | KYD-MC410-000 |
| GEAR | KYK-M864C-000 |
| COVER(RB) | KYM-M8612-000 |
| ASSY GEAR | KYD-MC211-000 |
| BELT | N510021326AA |
| BOLT-HEX-SCT | 90990-01J115 |
| NPM 240C NOZZLE | N610062681AD |
| SONY MOTHER BOARD | 1-797-651-12 |
| ASSY,LEVER | KYM-M8648-000 |
| PIN_HINGE | KYD-MC42S-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| SLIP RING | KYB-M7027-000 |
| GEAR | KYD-MC21U-000 |
| GXH SPECIAL NOZZLE | 13053 |
| ASSY,GEAR | KYM-M862C-000 |
| COVER ASSY | X-4700-067-4 |
| BELT | 6*3080*0.9 mm |
| GUIDE | KYD-MC11T-000 |
| HELICAL SPRING | N210068065AA |
| FUSE | KYL-M86KH-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| SONY NOZZEL | AF10071 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| UNIT,I/O | KYL-M86LV-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| BELT | 44548605 |
| ETC MOTOR | PK2K93S-2D |
| LEVER | KYB-M3T21-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| ASSY_TENSION | KYD-MC21N-000 |
| PCB-MOUNT | KYK-M861W-000 |
| 360F NOZZLE | 45466917 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| NPM 230C NOZZLE | N610040784AD |
| AIR_LINE_EQPT | KYB-M704D-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| NOZZLE_HV13C | KYA-M7713-000 |
| DD MOTOR | KYF-M860E-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| PIN,HINGE | KYB-M3T2Y-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| NPM H16 SHAFT | N510064335AA |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| GEAR | KYD-MC23C-00 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| ROCK | 2-149-675-01 |
| GUIDE,LINEAR | LWHD12X3 |
| CAM_FOLLOWER | KYA-M912N-000 |
| BALL | 4-719-920-01 |
| CASE-CONN | KYK-M860Y-000 |
| LEVER | KYB-M3T01-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
