Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
P/N:N610116866AA CAM FOLLOWER SMT Feeder Spare Parts for Panasonic CM402 Machine
| Part No | N610116866AA |
| Part Name | CAM FOLLOWER |
| Condition | Compatible new |
| Material | Steel |
| Usage | Panasonic CM402 Machine Feeder |
| Type | Panasonic CM402 Machine Feeder Parts |
Hot sale stock list:
| G5S ASSY_SHAFT | KYB-M700V-000 |
| LEVER | KYK-M861V-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| COVER | KYK-M86RD-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| FEEDER CABLE | KYL-M869D-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| COUPLING | KYB-M7116-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| BRACKET | KYL-M86KD-000/211FC709 |
| ASSY_GEAR | KYD-MC11A-000 |
| MACHINE SCREW | KYD-MC14G-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| WASHER | KYD-MC22H-00 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| LEVER | KYB-M3T0M-000 |
| TOOL | N510031628AA |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| SONY NOZZEL AF12082 | AF12082 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| HNS,CORD | KYL-M8621-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| POGO BLOCK | 0738A-0029 |
| LEVER | KYB-M3T33-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| NOZZLE_HV13C | KYA-M7713-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| GREASE | N990PANA-023 |
| SPRING_COMP | KYD-MC3T-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| 340F NOZZLE | 45466934 |
| SLIP RING | KYB-M7027-000 |
| TIMING BELT | KYB-M919E-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| SPRING | P/N:0730C-0252 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| FILTER | K46-M8527-COX |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| SPRING_COMP | KYD-MC129-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| SENSOR,PELEC | KYL-M8609-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| NOZZLE(FA06) | KYB-M77F6-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| GT-24040B FEEDER | KYD-MCN00-00 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| PIPE FITTING | 630 048 4656 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| DSP-2008K SQUEEGE | L:20CM |
| FFU | MX--575-A |
| MOTOR_DC | KYD-MC410-000 |
| GEAR | KYK-M864C-000 |
| SEAL | KYT-M862W-000 |
| BOTTON | ZB6-EB3B |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| PIN,HINGE | KYL-M860R-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| COVER ASSY | X-4700-067-4 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| FEEDER | GD38080 |
| GEAR | 4-719-921-02 |
| BLOCK | KYF-M867D-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| 935 NOZZLE | 00346524-03 |
| ASSY GEAR | KYD-MC211-000 |
| GEAR | KYD-MC20K-00 |
| SPRING COMP | KYD-MC13T-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| ASSY GRIP | KYD-MC21H-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| PCB-MOUNT | KYK-M861W-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| BOLT-HEX-SCT | 90990-01J115 |
| CASE-CONN | KYK-M860Y-000 |
| ARM STEEL | N210007284AB |
| UNIT,I/O | KYL-M86LV-000 |
| KIC ON BOARD | 6-10 CHANEL |
| GREASE GUN KH-35 | KXF08V7AA00 |
| UNIT,DRIVER | KYK-M860K-000 |
| 1220 NOZZLE | 51305323 |
| GUIDE,LINEAR | KYF-M867P-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| VALVE | 4-187-212-01 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NOZZLE_HG33C | KYA-M7703-000 |
| BELT_TIMING | KYA-M914W-000 |
| WASHER | 92902-03100 |
| NPM H8 SENSON | N510048691AA |
| LEVER(SUP) | KYD-MC20D-000 |
| B-234 NOZZLE | 47561103-B-234 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| BELT | 6*3080*0.9 mm |
| MICRO METER | 350-251-30 |
| ACCESSORY,SV | KYL-M861C-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| 904 NOZZLE | Y074-V904-0015 |
| NPM 235C NOZZLE | N610043814AD |
| SHROUDED POGO BLOCK | 0938A-0007 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| FUSH-SPECIAL | KYF-M860F-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ASSY,SPROCKET | KYM-M862A-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| NPM 185 NOZZLE | N610070338AB |
| LEVER | KYB-M3T01-000 |
| SLIP RING | KYB-M7027-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| GEAR | KYD-MC23C-00 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| FAN | 1204KL-04W-B59 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| RT BELT | 3-212-264-01 |
| GT38080 FEEDER | GT38080 FEEDER |
| ASSY,GEAR | KYM-M862C-000 |
| GXH SPECIAL NOZZLE | 13053 |
| COVER | KYM-M860X-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| LEVER | KYB-M3T22-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| GREASE FOR PANASONIC | N510048188AA |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| WASHER | 90990-37J010 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| GEAR | KYD-MC153-00 |
| 937 NOZZLE | 00322591-06 |
| NPM 235CS NOZZLE | N610043815AA |
| HELICAL SPRING | N210068065AA |
| SDD Hard Disk | N610059692AA |
| BELT | N510060977AA |
| NPM FILTER | N610097899AA |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| ASSY_CABLE | KYL-M86NC-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| Encoder Read Head For Universal | 49566101 |
| ASSY,HOOK | KYD-MC40A-000 |
| BELT TIMING | KYA-M9152-000 |
| COVER(LB) | KYM-M8657-000 |
| 234F NOZZLE | 45466931 |
| PIN_LOCATE | KYD-MC137-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| HOLDER | KYB-M701R-000 |
| CYLINDER | KYL-M869A-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| PIN_HINGE | KYD-MC42S-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| BELT | N510065133AA |
| FUSE | KYL-M86KH-000 |
| GUIDE | KYD-MC11T-000 |
| BM02 NOZZLE | BM02 |
| LEVER | KYB-M3T21-000 |
| BELT | 00334936S01 |
| SEAL | KYB-M702B-000 |
| SONY1000 FILTER | 4-761-920-01 |
| BALL | 4-719-920-01 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| PLATE | KYA-M3804-000 |
| ROCK | 2-149-675-01 |
| GUIDE,LINEAR | KYK-M860S-000 |
| NPM 240C NOZZLE | N610062681AD |
| NPM 230CS NOZZLE | N610040788AD |
| GRIP | KYD-MC109-000 |
| Fuji Packing | PH00991 |
| POWER SUPPLY | 11632XA |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| 933 NOZZLE | 00346523-03 |
| BUSH,BEARING | KYB-M3T3S-000 |
| NPM H16 SENSON | N510054833AA |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| GEAR | KYU-M868B-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| ASSY,LEVER | KYM-M8648-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| NPM H16 SHAFT | N510064335AA |
| COVER(RB) | KYM-M8612-000 |
| PIN-GAUGE | KXF00YHUA00 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| ASSY,LEVER | KYM-M864H-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| CASE-CONN | KYF-M860Y-000 |
| COUPLING | KYB-M702C-000 |
| DISK | KYB-M3T1A-000 |
| VALVE | SY3120-MZD-C6-F2 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| GEAR | KYD-MC21U-000 |
| VALVE | SY3240-5LZD |
| BELT | N510021326AA |
| COGNEX BOARD | KYK-M86PW-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| BLOCK L3 | KYB-M960C-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| PLATE | N610014970AE |
| BLOCK | KYL-M86KC-000/211G5472 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| SENSOR,PELEC | KYL-M86HL-000 |
| MOTOR | KYA-M700R-000 |
| ASSY_LEVER | KYD-MC212-000 |
| PIN,LOCATE | KYD-MCN3N-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| SENSOR | KYF-M8681-000 |
| SPRING_COMP | KYD-MCN41-000 |
| SPRING_COMP | KYB-M91CS-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| BELT | 44548605 |
| PIN_HINGE | KYD-MC41U-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| GEAR | KYD-MC424-000/223E0481 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| I/O CABLE,WIDE | 0938A-1007 |
| Fuji Filter | AA1FZ04 |
| CORD,BCR | KYF-M86NC-000 |
| NOZZLE | HG53G |
| DRIVER | N510002593AA |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| VALVE | 2-673-684-01 |
| COVER(RB) | KYD-MC10L-000 |
| PIN,HINGE | KYD-MC41S-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| CPK JG0250 | CPK JG0250 |
| 360F NOZZLE | 45466917 |
| BLOCK | KYA-M7027-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| ETC MOTOR | PK2K93S-2D |
| NPM 230C NOZZLE | N610040784AD |
| BUSH,BEARING | KYB-M3T3R-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| NPM X479 VALVE | N510054843AA |
| YG12 BELT | KHY-M9129-10 |
| SONY NOZZLE | CF25200 |
| 938 NOZZLE | 00322592-05 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| POWER SUPPLY | 1-474-020-11 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| PIN_LOCATE | KYD-MC132-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| PIN,HINGE | KYB-M3T31-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| ASSY_GEAR | KYD-MC40F-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| LEVER | KYK-M86LV-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| SEAL | KYB-M704E-000 |
| SPRING COMP | KYD-MC422-000 |
| GUIDE,LINEAR | LWHD12X3 |
| UNIT_DRIVER | KYK-M860F-000 |
| YG12F BELT | KHY-M9129-00 |
| ROLLER(B) | KYK-M86EM-000 |
| BELT | 6*3080*0.9 mm |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| WASHER | 92902-03200 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| COUPLING | KYK-M86AW-000 |
| LINE-SENSOR | KYF-M8607-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| ASSY_GEAR | KYD-MC412-000 |
| SONY NOZZEL | AF10071 |
| PCBA FIXTURE | FC150-130-60 |
| NOZZLE(VC74) | KYK-M7725-000 |
| PIN-GAUGE | KXF00YHTA00 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| DD MOTOR | KYF-M860E-000 |
| NPM 226CS NOZZLE | N610040783AB |
| AIR_LINE_EQPT | KYB-M704D-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
