Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
KYD-MC60G-000 / 0926220H GEAR SMT Feeder Parts for Hitachi
| Part No | 0926220H / KYD-MC60G-000 |
| Part Name | Gear |
| Condition | Compatiable new |
| Material | Brass |
| Usage | Hitachi machine |
| Type | Smt Feeder part |
Hot sale stock list:
| UNIT_DRIVER | KYK-M860F-000 |
| HNS,CORD | KYL-M8621-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| GRIP | KYD-MC109-000 |
| FILTER | K46-M8527-COX |
| WASHER | 90990-37J010 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| NOZZLE | HG53G |
| BUSH,BEARING | KYB-M3T3S-000 |
| YG12F BELT | KHY-M9129-00 |
| SDD Hard Disk | N610059692AA |
| GEAR | KYD-MC153-00 |
| SEAL | KYB-M702B-000 |
| COUPLING | KYB-M702C-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| PIPE FITTING | 630 048 4656 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| BRACKET | KYL-M86KD-000/211FC709 |
| SPRING_COMP | KYD-MC3T-000 |
| LEVER | KYK-M86LV-000 |
| CPK JG0250 | CPK JG0250 |
| COUPLING | KYB-M7116-000 |
| BELT | 00334936S01 |
| FAN | 1204KL-04W-B59 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| ASSY_GEAR | KYD-MC40F-000 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| WASHER | 92902-03100 |
| SEAL | KYB-M704E-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| BELT TIMING | KYA-M9152-000 |
| PIN_LOCATE | KYD-MC137-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| LEVER(SUP) | KYD-MC20D-000 |
| GEAR | KYD-MC424-000/223E0481 |
| COVER(LB) | KYM-M8657-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| COGNEX BOARD | KYK-M86PW-000 |
| BELT | 6*3080*0.9 mm |
| PIN,HINGE | KYD-MC41S-000 |
| HNS,LIGHTING | KYF-M861W-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| SHAFT ASSY. | KYF-M864U-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| ASSY_LEVER | KYD-MC212-000 |
| Fuji Filter | AA1FZ04 |
| SEAL | KYT-M862W-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| BM02 NOZZLE | BM02 |
| GT38080 FEEDER | GT38080 FEEDER |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| FEEDER | GD38080 |
| NPM H16 SENSON | N510054833AA |
| SPRING_COMP | KYD-MCN41-000 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| BLOCK | KYL-M86KC-000/211G5472 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| PCBA FIXTURE | FC150-130-60 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| BALL | 4-719-920-01 |
| GREASE FOR PANASONIC | N510048188AA |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| TOOL | N510031628AA |
| NPM 240C NOZZLE | N610062681AD |
| SENSOR-PELEC | KYK-M861Y-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| GXH SPECIAL NOZZLE | 13053 |
| GEAR | KYK-M864C-000 |
| Fuji Packing | PH00991 |
| NOZZLE_HG52C | KYA-M7705-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| BOLT-HEX-SCT | 90990-01J115 |
| PIN_HINGE | KYD-MC41U-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| LEVER | KYB-M3T21-000 |
| CORD,BCR | KYF-M86NC-000 |
| CASE-CONN | KYF-M860Y-000 |
| 1220 NOZZLE | 51305323 |
| FEEDER CABLE | KYL-M869D-000 |
| 933 NOZZLE | 00346523-03 |
| SENSOR,PELEC | KYK-M86DE-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| MOTOR | KYA-M700R-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| BUCK_UP_PIN | KYA-M3802-000 |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| FFU | MX--575-A |
| 937 NOZZLE | 00322591-06 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| CYLINDER | KYL-M869A-000 |
| NPM 230CS NOZZLE | N610040788AD |
| POWER SUPPLY | 1-474-020-11 |
| ARM STEEL | N210007284AB |
| DISK | KYB-M3T1A-000 |
| SENSOR | KYF-M8681-000 |
| 340F NOZZLE | 45466934 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| ASSY GEAR | KYD-MC211-000 |
| SONY NOZZLE | CF25200 |
| PIN,HINGE | KYL-M860R-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| 360F NOZZLE | 45466917 |
| GEAR | 4-719-921-02 |
| ROLLER(B) | KYK-M86EM-000 |
| NPM H8 SENSON | N510048691AA |
| ASSY_SHAFT | KYF-M8651-000 |
| GUIDE | KYD-MC11T-000 |
| Encoder Read Head For Universal | 49566101 |
| ASSY_TENSION | KYD-MC21N-000 |
| DD MOTOR | KYF-M860E-000 |
| VALVE | SY3120-MZD-C6-F2 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| VALVE | 4-187-212-01 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| PIN,LOCATE | KYD-MCN3N-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| LEVER | KYB-M3T22-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| CASE-CONN | KYK-M860Y-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| BLOCK | KYA-M7027-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| RT BELT | 3-212-264-01 |
| BELT | 44548605 |
| SPRING_COMP | KYD-MC129-000 |
| MOTOR_DC | KYD-MC410-000 |
| ASSY,LEVER | KYM-M8648-000 |
| UNIT-DRIVER | KYK-M861A-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| PCB-MOUNT | KYK-M861W-000 |
| NOZZLE(VC74) | KYK-M7725-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| I/O CABLE,WIDE | 0938A-1007 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| 904 NOZZLE | Y074-V904-0015 |
| UNIT,I/O | KYL-M86LV-000 |
| LINE-SENSOR | KYF-M8607-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| DSP-2008K SQUEEGE | L:20CM |
| BELT | N510060977AA |
| PIN,HINGE | KYB-M3T31-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| GEAR | KYD-MC20K-00 |
| 938 NOZZLE | 00322592-05 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| PIN-GAUGE | KXF00YHUA00 |
| KIC ON BOARD | 6-10 CHANEL |
| NPM 185 NOZZLE | N610070338AB |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| CAM FOLLOWER | KYB-M704A-000 |
| SPRING_COMP | KYB-M91CS-000 |
| NPM 235C NOZZLE | N610043814AD |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| SLIP RING | KYB-M7027-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| PLATE | KYA-M3804-000 |
| NPM H16 SHAFT | N510064335AA |
| ETC MOTOR | PK2K93S-2D |
| HV31 NOZZLE | KYL-M7718-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| WASHER | KYD-MC22H-00 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| DEK SQUEEGE | DEK-03T 长25CM |
| SONY NOZZEL AF12082 | AF12082 |
| SPRING | P/N:0730C-0252 |
| GEAR | KYD-MC23C-00 |
| LEVER | KYK-M861V-000 |
| POGO BLOCK | 0738A-0029 |
| SONY1000 FILTER | 4-761-920-01 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| CAM_FOLLOWER | KYA-M912N-000 |
| NPM X479 VALVE | N510054843AA |
| WASHER | 92902-03200 |
| GEAR | KYD-MC23C-000/6301352305 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| GUIDE,LINEAR | KYF-M867P-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| ASSY_GEAR | KYD-MC11A-000 |
| BLOCK L3 | KYB-M960C-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| PIN-GAUGE | KXF00YHTA00 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| NPM 226CS NOZZLE | N610040783AB |
| GEAR | KYU-M868B-000 |
| BOTTON | ZB6-EB3B |
| SONY NOZZEL | AF10071 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| 234F NOZZLE | 45466931 |
| PIN,HINGE | KYB-M3T2Y-000 |
| MICRO METER | 350-251-30 |
| SENSOR,PELEC | KYL-M86HL-000 |
| NOZZLE_HG82C | KYA-M7708-000 |
| TIMING BELT | KYB-M919E-000 |
| PLATE | N610014970AE |
| SHROUDED POGO BLOCK | 0938A-0007 |
| SPRING COMP | KYD-MC13T-000 |
| COVER | KYK-M86RD-000 |
| BELT | N510021326AA |
| NOZZLE_HV13C | KYA-M7713-000 |
| FUSE | KYL-M86KH-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| NPM 230C NOZZLE | N610040784AD |
| NPM 235CS NOZZLE | N610043815AA |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| LEVER | KYB-M3T01-000 |
| COVER(RB) | KYM-M8612-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| 935 NOZZLE | 00346524-03 |
| MACHINE SCREW | KYD-MC14G-000 |
| GUIDE,LINEAR | LWHD12X3 |
| COVER | KYM-M860X-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| POWER SUPPLY | 11632XA |
| BELT | 6*3080*0.9 mm |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| B-234 NOZZLE | 47561103-B-234 |
| GREASE | N990PANA-023 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| GEAR | KYD-MC21U-000 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| ASSY_GEAR | KYD-MC412-000 |
| VALVE | 2-673-684-01 |
| DRIVER | N510002593AA |
| VALVE | SY3240-5LZD |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| ASSY,LEVER | KYM-M864H-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| BUSH,BEARING | KYB-M3T3R-000 |
| COVER(RB) | KYD-MC10L-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| FUSH-SPECIAL | KYF-M860F-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BELT_TIMING | KYA-M914W-000 |
| ROCK | 2-149-675-01 |
| ASSY GRIP | KYD-MC21H-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| YG12 BELT | KHY-M9129-10 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| SPRING COMP | KYD-MC422-000 |
| NOZZLE_HV19C | KYA-M7719-000 |
| PIN_LOCATE | KYD-MC132-000 |
| NPM FILTER | N610097899AA |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| COUPLING | KYK-M86AW-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| COVER ASSY | X-4700-067-4 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| HELICAL SPRING | N210068065AA |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| BLOCK | KYF-M867D-000 |
| LEVER | KYB-M3T0M-000 |
| PIN_HINGE | KYD-MC42S-000 |
| ASSY,GEAR | KYM-M862C-000 |
| HOLDER | KYB-M701R-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| LEVER | KYB-M3T33-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| BELT | N510065133AA |
| SLIP RING | KYB-M7027-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
