Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
N610043814AA 235C Nozzle SMT Pick And Place Nozzles for Panasonic CM402 Machine
| Part No | N610043814AA 235c |
| Part Name | 235C Nozzle |
| Condition | Original New Compatible new |
| Material | Steel |
| Usage | Panasonic CM402 Machine |
| Type | Panasonic CM402 Machine Parts |
Hot Sale Stock List:
| ARM STEEL | N210007284AB |
| ASSY_LEVER | KYD-MC212-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| SPRING_COMP | KYB-M91CS-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| SPRING_COMP | KYD-MCN41-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| BM02 NOZZLE | BM02 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| NPM 230CS NOZZLE | N610040788AD |
| MOTOR_DC | KYD-MC410-000 |
| NPM 185 NOZZLE | N610070338AB |
| NOZZLE(FA06) | KYB-M77F6-000 |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| 360F NOZZLE | 45466917 |
| NOZZLE_HV14C | KYA-M7714-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| CAM_FOLLOWER | KYA-M912N-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| MACHINE SCREW | KYD-MC14G-000 |
| BELT | 44548605 |
| P_RCG_SCOPE | KYB-M730B-000 |
| 904 NOZZLE | Y074-V904-0015 |
| NOZZLE | HG53G |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| PIPE FITTING | 630 048 4656 |
| GEAR | KYK-M864C-000 |
| FFU | MX--575-A |
| SPRING COMP | KYD-MC422-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| NPM X479 VALVE | N510054843AA |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| COVER(RB) | KYD-MC10L-000 |
| ROLLER(B) | KYK-M86EM-000 |
| GEAR | KYD-MC23C-00 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| BLOCK | KYF-M867D-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| NPM FILTER | N610097899AA |
| GT-24040B FEEDER | KYD-MCN00-00 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| NOZZLE(VC74) | KYK-M7725-000 |
| VALVE | 2-673-684-01 |
| YG12 BELT | KHY-M9129-10 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| 935 NOZZLE | 00346524-03 |
| SEAL | KYB-M704E-000 |
| FILTER | K46-M8527-COX |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| BOTTON | ZB6-EB3B |
| MICRO METER | 350-251-30 |
| COVER | KYM-M860X-000 |
| WASHER | KYD-MC22H-00 |
| CAM FOLLOWER | KYB-M704A-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| BLOCK | KYA-M7027-000 |
| GUIDE,LINEAR | LWHD12X3 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| LIGHTING_UNIT | KYB-M700T-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| ROCK | 2-149-675-01 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| HOLDER | KYB-M701R-000 |
| LEVER | KYK-M861V-000 |
| PIN_HINGE | KYD-MC42S-000 |
| ETC MOTOR | PK2K93S-2D |
| NOZZLE_HG33C | KYA-M7703-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| SENSOR | KYF-M8681-000 |
| SPRING_COMP | KYD-MC129-000 |
| 234F NOZZLE | 45466931 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| LEVER(SUP) | KYD-MC20D-000 |
| BLOCK L3 | KYB-M960C-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| POGO BLOCK | 0738A-0029 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| WASHER | 92902-03100 |
| FUSH-SPECIAL | KYF-M860F-000 |
| CYLINDER | KYL-M869A-000 |
| PIN,HINGE | KYD-MC41S-000 |
| ASSY,LEVER | KYM-M8648-000 |
| MOTOR_DC | KYD-MCN2G-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| POWER SUPPLY | 1-474-020-11 |
| NOZZLE_HV19C | KYA-M7719-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| BELT | N510021326AA |
| TIMING BELT | KYB-M919E-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SPRING | P/N:0730C-0252 |
| PLATE | KYA-M3804-000 |
| GUIDE | KYD-MC11T-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| ASSY_GEAR | KYD-MC412-000 |
| Encoder Read Head For Universal | 49566101 |
| NPM 240C NOZZLE | N610062681AD |
| NPM 230C NOZZLE | N610040784AD |
| ASSY,GEAR | KYM-M862C-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| PIN-GAUGE | KXF00YHUA00 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| CPK JG0250 | CPK JG0250 |
| CORD,BCR | KYF-M86NC-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| DD MOTOR | KYF-M860E-000 |
| KIC ON BOARD | 6-10 CHANEL |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| PIN,LOCATE | KYD-MCN3N-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| ASSY,LEVER | KYM-M864H-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| FEEDER | GD38080 |
| NPM 235C NOZZLE | N610043814AD |
| COUPLING | KYB-M702C-000 |
| BELT | N510060977AA |
| BELT TIMING | KYA-M9152-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| YG12F BELT | KHY-M9129-00 |
| SLIP RING | KYB-M7027-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| LEVER | KYB-M3T0M-000 |
| GXH SPECIAL NOZZLE | 13053 |
| ASSY,SPROCKET | KYM-M862A-000 |
| WASHER | 90990-37J010 |
| COVER | KYK-M86RD-000 |
| B-234 NOZZLE | 47561103-B-234 |
| COGNEX BOARD | KYK-M86PW-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| COVER(LB) | KYM-M8657-000 |
| GEAR | KYD-MC153-00 |
| MOTOR | KYA-M700R-000 |
| TOOL | N510031628AA |
| COVER(MAK1-2) | KYD-MC11X-000 |
| NPM H8 SENSON | N510048691AA |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| BELT | N510065133AA |
| Fuji Packing | PH00991 |
| PCBA FIXTURE | FC150-130-60 |
| DISK | KYB-M3T1A-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| NOZZLE_HG82C | KYA-M7708-000 |
| 937 NOZZLE | 00322591-06 |
| 340F NOZZLE | 45466934 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| FUSE | KYL-M86KH-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| COUPLING | KYB-M7116-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| SONY1000 FILTER | 4-761-920-01 |
| ASSY_GEAR | KYD-MC40F-000 |
| GREASE FOR PANASONIC | N510048188AA |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| BELT | 00334936S01 |
| GEAR | KYD-MC20K-00 |
| PIN_LOCATE | KYD-MC132-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| SPRING COMP | KYD-MC13T-000 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| BUCK_UP_PIN | KYA-M3802-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| BELT | 6*3080*0.9 mm |
| COVER ASSY | X-4700-067-4 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY,HOOK | KYD-MC40A-000 |
| GEAR | 4-719-921-02 |
| SLIP RING | KYB-M7027-000 |
| SEAL | KYT-M862W-000 |
| GEAR | KYD-MC21U-000 |
| BELT_TIMING | KYA-M914W-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| 1220 NOZZLE | 51305323 |
| WASHER | 92902-03200 |
| HNS,CORD | KYL-M8621-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| SONY NOZZEL | AF10071 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| LEVER | KYK-M86LV-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| Fuji Filter | AA1FZ04 |
| HNS,LIGHTING | KYF-M861W-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| SDD Hard Disk | N610059692AA |
| CASE-CONN | KYF-M860Y-000 |
| RT BELT | 3-212-264-01 |
| DSP-2008K SQUEEGE | L:20CM |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| LEVER | KYB-M3T01-000 |
| PCB-MOUNT | KYK-M861W-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| VALVE | SY3240-5LZD |
| POWER SUPPLY | 11632XA |
| UNIT-DRIVER | KYK-M861A-000 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| LEVER | KYB-M3T22-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| SONY NOZZEL AF12082 | AF12082 |
| GEAR | KYD-MC424-000/223E0481 |
| DRIVER | N510002593AA |
| NOZZLE(HB04C) | KYB-M7721-100 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| SPRING_COMP | KYD-MC3T-000 |
| SONY MOTHER BOARD | 1-797-651-12 |
| NPM H16 SENSON | N510054833AA |
| LINE-SENSOR | KYF-M8607-000 |
| 938 NOZZLE | 00322592-05 |
| ASSY GRIP | KYD-MC21H-000 |
| PIN-GAUGE | KXF00YHTA00 |
| CASE-CONN | KYK-M860Y-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| PIN_LOCATE | KYD-MC137-000 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| VALVE | 4-187-212-01 |
| HV31 NOZZLE | KYL-M7718-000 |
| FAN | 1204KL-04W-B59 |
| SONY NOZZLE | CF25200 |
| PULLEY_TIMING | KYB-M91AL-000 |
| FEEDER CABLE | KYL-M869D-000 |
| NPM 235CS NOZZLE | N610043815AA |
| PLATE | N610014970AE |
| 933 NOZZLE | 00346523-03 |
| PIN_HINGE | KYD-MC41U-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| HELICAL SPRING | N210068065AA |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| NPM 226CS NOZZLE | N610040783AB |
| BELT | 6*3080*0.9 mm |
| GREASE | N990PANA-023 |
| GRIP | KYD-MC109-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| PIN,HINGE | KYL-M860R-000 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| TAIL PIVOT | P/N:0740C-0109 |
| SENSOR-PELEC | KYK-M861Y-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| UNIT,I/O | KYL-M86LV-000 |
| GEAR | KYD-MC23C-000/6301352305 |
| BALL | 4-719-920-01 |
| COVER(RB) | KYM-M8612-000 |
| SEAL | KYB-M702B-000 |
| VALVE | SY3120-MZD-C6-F2 |
| LEVER | KYB-M3T33-000 |
| UNIT_DRIVER | KYK-M860F-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| PIN,HINGE | KYB-M3T31-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| GXH-1 FILTER | KYL-M860S-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| NPM H16 SHAFT | N510064335AA |
| GEAR | KYU-M868B-000 |
| LEVER | KYB-M3T21-000 |
| COUPLING | KYK-M86AW-000 |
| ASSY GEAR | KYD-MC211-000 |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
