Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
YX23 Nozzle Smt Pick and Place Nozzles for Hitachi Machine
| Part No | YX23 |
| Part Name | Nozzle |
| Condition | Original new |
| Material | rubber/steel |
| Usage | Hitachi machine |
| Type | Smt Pick and Place Nozzles part |
Hot sale stock list:
| NPM 235C NOZZLE | N610043814AD |
| BELT | 00334936S01 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| VALVE | SY3240-5LZD |
| UNIT_DRIVER | KYK-M860F-000 |
| FAN | 1204KL-04W-B59 |
| SPRING_COMP | KYD-MC3T-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| ASSY_TENSION | KYD-MC21N-000 |
| B-234 NOZZLE | 47561103-B-234 |
| VALVE | 2-673-684-01 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| SHAFT ASSY. | KYF-M864U-000 |
| WASHER | KYD-MC22H-00 |
| PIN,HINGE | KYB-M3T31-000 |
| SDD Hard Disk | N610059692AA |
| BELT | N510065133AA |
| 904 NOZZLE | Y074-V904-0015 |
| COVER ASSY | X-4700-067-4 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| ASSY GEAR | KYD-MC211-000 |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| BUSH,BEARING | KYB-M3T3S-000 |
| KIC ON BOARD | 6-10 CHANEL |
| BELT_TIMING | KYA-M914W-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| TOOL | N510031628AA |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| I/O CABLE,WIDE | 0938A-1007 |
| SPRING COMP | KYD-MC422-000 |
| GEAR | KYD-MC153-00 |
| SPRING_COMP | KYD-MC129-000 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| PIN,HINGE | KYD-MC41S-000 |
| NPM X479 VALVE | N510054843AA |
| LEVER | KYB-M3T21-000 |
| FFU | MX--575-A |
| NOZZLE_SHAFT | KYF-M8619-000 |
| Fuji Packing | PH00991 |
| GEAR | 4-719-921-02 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| TAIL PIVOT | P/N:0740C-0109 |
| P_RCG_SCOPE | KYB-M730B-000 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| SENSOR,PELEC | KYK-M86DE-000 |
| BELT | N510021326AA |
| GEAR | KYD-MC23C-000/6301352305 |
| BLOCK L3 | KYB-M960C-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| SPRING_COMP | KYD-MCN41-000 |
| SEAL | KYT-M862W-000 |
| PLATE | N610014970AE |
| CAM_FOLLOWER | KYA-M912N-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| ARM STEEL | N210007284AB |
| FILTER | K46-M8527-COX |
| NPM 185 NOZZLE | N610070338AB |
| NOZZLE(BA06) | KYB-M77A6-000 |
| GEAR | KYU-M868B-000 |
| GUIDE | KYD-MC11T-000 |
| GEAR | KYK-M864C-000 |
| ROCK | 2-149-675-01 |
| SONY NOZZEL | AF10071 |
| NOZZLE(FA04) | KYB-M77F4-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| 935 NOZZLE | 00346524-03 |
| VALVE | SY3120-MZD-C6-F2 |
| COGNEX BOARD | KYK-M86PW-000 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| DSP-2008K SQUEEGE | L:20CM |
| MOTOR | KYA-M700R-000 |
| HNS,CORD | KYL-M8621-000 |
| PIN,HINGE | KYL-M860R-000 |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| DD MOTOR | KYF-M860E-000 |
| FEEDER CABLE | KYL-M869D-000 |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| SEAL | KYB-M704E-000 |
| BLOCK | KYA-M7027-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| HOLDER | KYB-M701R-000 |
| CPK JG0250 | CPK JG0250 |
| BRACKET | KYL-M86KD-000/211FC709 |
| PIN_HINGE | KYD-MC42S-000 |
| ASSY,LEVER | KYM-M864H-000 |
| GEAR | KYD-MC424-000/223E0481 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| NPM FILTER | N610097899AA |
| LINE-SENSOR | KYF-M8607-000 |
| NOZZLE(WC01) | KYB-M77W1-100 |
| COVER(HIRA-1) | KYD-MC20X-000 |
| COUPLING | KYK-M86AW-000 |
| BELT | N510060977AA |
| PIN_LOCATE | KYD-MC132-000 |
| 340F NOZZLE | 45466934 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| HOLDER | KYB-M702F-000/0916DK2D |
| LEVER | KYB-M3T0M-000 |
| RT BELT | 3-212-264-01 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| PIPE FITTING | 630 048 4656 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| BELT | 6*3080*0.9 mm |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| ETC MOTOR | PK2K93S-2D |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| NOZZLE(VC74) | KYK-M7725-000 |
| NOZZLE_HG52C | KYA-M7705-000 |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| HNS,LIGHTING | KYF-M861W-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| CAM FOLLOWER | KYB-M704A-000 |
| POWER SUPPLY | 11632XA |
| COVER(MAK1-2) | KYD-MC11X-000 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| BOTTON | ZB6-EB3B |
| GUIDE,LINEAR | KYK-M86LE-001 |
| NPM 230CS NOZZLE | N610040788AD |
| ASSY_SHAFT | KYF-M8651-000 |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| CYLINDER | KYL-M869A-000 |
| COVER | KYK-M86RD-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| LIGHTING_UNIT | KYB-M700T-000 |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| GUIDE,LINEAR | LWHD12X3 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| SLIP RING | KYB-M7027-000 |
| GXH SPECIAL NOZZLE | 13053 |
| ASSY_GEAR | KYD-MC412-000 |
| ASSY_CABLE | KYL-M86NC-000 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| COVER (12/16mm) | KYD-MC20Y-000 |
| MICRO METER | 350-251-30 |
| NOZZLE_HG33C | KYA-M7703-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| PIN-GAUGE | KXF00YHUA00 |
| LEVER | KYB-M3T01-000 |
| 933 NOZZLE | 00346523-03 |
| ASSY,HOOK | KYD-MC40A-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| MOTOR_DC | KYD-MC410-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| FUSH-SPECIAL | KYF-M860F-000 |
| COVER | KYM-M860X-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| DISK | KYB-M3T1A-000 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| SPRING | P/N:0730C-0252 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| YG12F BELT | KHY-M9129-00 |
| NPM 235CS NOZZLE | N610043815AA |
| PCB-MOUNT | KYK-M861W-000 |
| ASSY_GEAR | KYD-MC40F-000 |
| NPM 230C NOZZLE | N610040784AD |
| GEAR | KYD-MC20K-00 |
| ASSY,GEAR | KYM-M862C-000 |
| SEAL | KYB-M702B-000 |
| GRIP | KYD-MC109-000 |
| PIN-GAUGE | KXF00YHTA00 |
| SONY NOZZLE | CF25200 |
| NOZZLE | HG53G |
| CORD,BCR | KYF-M86NC-000 |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| GUIDE,LINEAR | KYF-M867P-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| COUPLING | KYB-M702C-000 |
| PLATE | KYA-M3804-000 |
| UNIT,I/O | KYL-M86LV-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| LEVER | KYB-M3T22-000 |
| PULLEY_TIMING | KYB-M91AL-000 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| ASSY,LEVER | KYM-M8648-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| NOZZLE(HB03C) | KYB-M7720-100 |
| 938 NOZZLE | 00322592-05 |
| 234F NOZZLE | 45466931 |
| MACHINE SCREW | KYD-MC14G-000 |
| BELT | 6*3080*0.9 mm |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| SPRING COMP | KYD-MC13T-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| DEK SQUEEGE | DEK-03T 长25CM |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| BELT TIMING | KYA-M9152-000 |
| COUPLING | KYB-M7116-000 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| BOLT-HEX-SCT | 90990-01J115 |
| SLIP RING | KYB-M7027-000 |
| VALVE | 4-187-212-01 |
| BALL | 4-719-920-01 |
| NOZZLE_HV19C | KYA-M7719-000 |
| NPM H16 SHAFT | N510064335AA |
| NPM 226CS NOZZLE | N610040783AB |
| COVER(RB) | KYD-MC10L-000 |
| SENSOR-PELEC | KYK-M861Y-000 |
| WASHER | 92902-03100 |
| HELICAL SPRING | N210068065AA |
| LEVER | KYK-M861V-000 |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| PIN,HINGE | KYB-M3T2Y-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| WASHER | 90990-37J010 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| MOTOR_DC | KYD-MCN2G-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| SENSOR | KYF-M8681-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| GREASE | N990PANA-023 |
| COVER(LB) | KYM-M8657-000 |
| 360F NOZZLE | 45466917 |
| Fuji Filter | AA1FZ04 |
| TIMING BELT | KYB-M919E-000 |
| UNIT,DRIVER | KYK-M860K-000 |
| FEEDER | GD38080 |
| PIN,LOCATE | KYD-MCN3N-000 |
| 937 NOZZLE | 00322591-06 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| GREASE FOR PANASONIC | N510048188AA |
| FUSE | KYL-M86KH-000 |
| POWER SUPPLY | 1-474-020-11 |
| BUSH,BEARING | KYB-M3T3R-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| NOZZLE(HB04C) | KYB-M7721-100 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| SENSOR,PELEC | KYL-M8609-000 |
| Encoder Read Head For Universal | 49566101 |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| BLOCK | KYF-M867D-000 |
| YG12 BELT | KHY-M9129-10 |
| POGO BLOCK | 0738A-0029 |
| UNIT-DRIVER | KYK-M861A-000 |
| 1220 NOZZLE | 51305323 |
| DRIVER | N510002593AA |
| NPM 240C NOZZLE | N610062681AD |
| WASHER | 92902-03200 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| GT38080 FEEDER | GT38080 FEEDER |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| PCBA FIXTURE | FC150-130-60 |
| LEVER | KYB-M3T33-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| PIN_LOCATE | KYD-MC21Y-000 |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| NPM H16 SENSON | N510054833AA |
| NOZZLE_HG82C | KYA-M7708-000 |
| ROLLER(B) | KYK-M86EM-000 |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| BM02 NOZZLE | BM02 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| GEAR | KYD-MC21U-000 |
| LEVER(SUP) | KYD-MC20D-000 |
| LEVER | KYK-M86LV-000 |
| CASE-CONN | KYF-M860Y-000 |
| GEAR | KYD-MC23C-00 |
| PIN_LOCATE | KYD-MC137-000 |
| BELT | 44548605 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| SONY1000 FILTER | 4-761-920-01 |
| PIN_HINGE | KYD-MC41U-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| ASSY GRIP | KYD-MC21H-000 |
| CASE-CONN | KYK-M860Y-000 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| ASSY_LEVER | KYD-MC212-000 |
| SPRING_COMP | KYB-M91CS-000 |
| ASSY,SPROCKET | KYM-M862A-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| ASSY_GEAR | KYD-MC11A-000 |
| NPM H8 SENSON | N510048691AA |
| SONY MOTHER BOARD | 1-797-651-12 |
| COVER(RB) | KYM-M8612-000 |
| NOZZLE_HV13C | KYA-M7713-000 |
| SONY NOZZEL AF12082 | AF12082 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
