Active Member
|
[China]
Address: Unit 919 of Yagang BLDG, Fu'an Avenue，Pinghu，Longgang，Shenzhen，China
Contact name:Ma
shenzhen merex technology co.,ltd |
|
|
Hitachi Grip Nozzle -FC35 Smt Pick And Place Nozzles for Hitachi Machine
| Part No | FC35 |
| Part Name | Grip Nozzle |
| Condition | Compatible new |
| Material | steel/rubber |
| Usage | Hitachi machine |
| Type | SMT part |
Hot sale stock list:
| COVER(HIRA-1) | KYD-MC20X-000 |
| NOZZLE(FA05) | KYB-M77F5-000 |
| ASSY_GEAR | KYD-MC11A-000 |
| CYLINDER | KYK-M8629-000/KYB-M919H-000 |
| HOLDER | KYB-M702F-000/0916DK2D |
| UNIT,DRIVER | KYK-M860K-000 |
| NOZZLE_HG33C | KYA-M7703-000 |
| VALVE | SY3240-5LZD |
| COVER | KYM-M860X-000 |
| FUSH-SPECIAL | KYF-M860F-000 |
| PIN_LOCATE | KYD-MC132-000 |
| NPM H16 SHAFT | N510064335AA |
| FEEDER | GD38080 |
| NPM 8mm FEEDER | KXFW1S5A00 |
| CPK JG0250 | CPK JG0250 |
| LEVER | KYB-M3T33-000 |
| SONY1000 FILTER | 4-761-920-01 |
| MOTOR,AC-SERVO | KYL-M8625-000 |
| ASSY_LEVER(R) | KYD-MC11N-000 |
| NPM 12*16 FEEDER | KXFW1KSCA00 |
| BM02 NOZZLE | BM02 |
| 933 NOZZLE | 00346523-03 |
| NOZZLE(BA06) | KYB-M77A6-000 |
| 935 NOZZLE | 00346524-03 |
| BLOCK | KYF-M867D-000 |
| ETC INDUCTION MOTOR | PKRK93S-2A |
| MOTOR_AC-SERVO | KYF-M860D-000 |
| NPM 235C NOZZLE | N610043814AD |
| HOLDER | KYB-M701R-000 |
| SENSOR,PELEC | KYL-M86HL-000 |
| COUPLING | KYB-M7116-000 |
| WASHER | KYD-MC22H-00 |
| GT38080 FEEDER | GT38080 FEEDER |
| NOZZLE(FA04) | KYB-M77F4-000 |
| DRIVER | N510002593AA |
| ROLLER(B) | KYK-M86EM-000 |
| NOZZLE(FA06) | KYB-M77F6-000 |
| BUSH,BEARING | KYB-M3T3R-000 |
| SONY TRAY SHUTTER CYLINDER | 1-478-936-11/MXU16-20-M9N |
| GREASE | N990PANA-023 |
| ASSY_HOOK | KYD-MC10T-000/016J0024 |
| ASSY_NOZZLE(BC02) | KYB-M77C2-B00 |
| P/N:JG000912 8mm | P/N:JG000912 8mm |
| SPRING_COMP | KYD-MCN41-000 |
| ASSY_VALVE_F | KYB-M3J0X-000 |
| NPM 240C NOZZLE | N610062681AD |
| PIN,HINGE | KYL-M860R-000 |
| NPM X479 VALVE | N510054843AA |
| PIN_LOCATE | KYD-MC137-000 |
| LEVER | KYB-M3T01-000 |
| PIN,HINGE | KYD-MC41S-000 |
| PIN,HINGE | KYD-MC61N-000/216D0472/6301305042 |
| 904 NOZZLE | Y074-V904-0015 |
| GREASE GUN KH-35 | KXF08V7AA00 |
| MACHINE SCREW | KYD-MC14G-000 |
| Y AXIS GUIDE | SSR5XW2UUC1+970LYH |
| Special Nozzle SPO4R | Special Nozzle SPO4R |
| BOLT_HEX-SCT | 90990-01J142 M3*12 |
| SEAL | KYB-M702B-000 |
| ASSY,GEAR | KYM-M862C-000 |
| ASSY_SHAFT | KYF-M8651-000 |
| GEAR | KYD-MC424-000/223E0481 |
| LEVER | KYK-M86LV-000 |
| TAIL PIVOT BEARING | P/N:0740C-0110 |
| SDD Hard Disk | N610059692AA |
| GXH Y AXIS GUIDE | GXH Y AXIS GUIDE |
| BELT | 44548605 |
| GUIDE,LINEAR | LWHD12X3 |
| NPM 8头 NOZZLE HOLDER | N610067607AE |
| ASSY_BLOCK_TOP | KYD-M701U-000 |
| ROCK | 2-149-675-01 |
| CAM_FOLLOWER | KYA-M912N-000 |
| FAN | 1204KL-04W-B59 |
| I/O CABLE,WIDE | 0938A-1007 |
| DSP-2008K SQUEEGE | L:20CM |
| PLATE | KYA-M3804-000 |
| MOTOR,AC-SERVO | KYF-M860P-000 |
| ARM STEEL | N210007284AB |
| NOZZLE(WC01) | KYB-M77W1-100 |
| SENSOR | KYF-M8681-000 |
| NPM H8 SENSON | N510048691AA |
| LIGHTING_UNIT | KYB-M700T-000 |
| SPRING_COMP | KYD-MC129-000 |
| NOZZLE_HV14C | KYA-M7714-000 |
| NOZZLE(HB04C) | KYB-M7721-100 |
| ASSY_CABLE | KYL-M86NC-000 |
| POGO BLOCK | 0738A-0029 |
| BLOCK L3 | KYB-M960C-000 |
| ASSY,HOOK | KYD-MC40A-000 |
| BOLT_HEX-SCT | 90990-06J009 M4*20 |
| PULLEY_TIMING | KYB-M91AL-000 |
| NOZZLE HG52C set 15 | KYA-M8C07-200 |
| TORX FLAT HEAD 3*5 | P/N:M03X05-TFHS |
| NOZZLE(VC74) | KYK-M7725-000 |
| SHAFT ASSY. | N510054811AA/N510069637AA |
| SPRING_COMP | KYD-MC3T-000 |
| 32mm FEEDER JIG TAPE | KYH-M8604-000 |
| SHAFT ASSY. | KYF-M864U-000 |
| YG12F BELT | KHY-M9129-00 |
| SLIP RING | KYB-M7027-000 |
| BOLT,HEX-SCT 630 000 7503 | 91317-03006 |
| 340F NOZZLE | 45466934 |
| BOLT-HEX-SCT | 90990-01J115 |
| ASSY_VACUUM_VALVE | KYB-M7034-000 |
| BOLT,HEX-SCT 630 000 7664 | 91317-04020 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| GUIDE,LINEAR | KYF-M867P-000 |
| PIPE FITTING | 630 048 4656 |
| TOOL | N510031628AA |
| ASSY_NOZZLE(BA05) | KYB-M77A5-B00 |
| GEAR | 4-719-921-02 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY,LEVER | KYM-M8648-000 |
| BELT | 00334936S01 |
| NOZZLE HG33C SET 15 | KYA-M8C07-100 |
| LEVER | KYK-M861V-000 |
| GRIP | KYD-MC109-000 |
| WASHER | 92902-03200 |
| NOZZLE_HG82C | KYA-M7708-000 |
| NPM 230CS NOZZLE | N610040788AD |
| BOLT,HEX-SCT 630 000 7527 | 91317-03010 |
| ASSY GEAR | KYD-MC211-000 |
| DEK POWER SUPPLY | V6G00KZ/185312 |
| COVER(RB) | KYM-M8612-000 |
| ASSY_TENSION | KYD-MC21N-000 |
| COVER(LB) | KYM-M8657-000 |
| COVER(MAK1-2) | KYD-MC11X-000 |
| WASHER | 90990-37J010 |
| GUIDE,LINEAR | KYK-M86KY-000 |
| SEAL | KYB-M704E-000 |
| MOTOR | KYA-M700R-000 |
| GEAR(Feeder GEAR) | KYD-MC130-000/1016B209 |
| SHROUDED POGO BLOCK | 0938A-0007 |
| NOZZLE_HV19C | KYA-M7719-000 |
| BELT | 6*3080*0.9 mm |
| GEAR | KYD-MC153-00 |
| NOZZLE_HG52C | KYA-M7705-000 |
| HNS,CONV-MOT-R | KYB-M9143-000 |
| RT BELT | 3-212-264-01 |
| ASSY_NOZZLE(VA05) | KYK-M770J-A00 |
| MOTOR_DC | KYD-MCN2G-000 |
| 937 NOZZLE | 00322591-06 |
| ASSY_PLATE(MAGNET) | KYD-MC115-000 |
| 1220 NOZZLE | 51305323 |
| ASSY,LEVER | KYM-M864H-000 |
| P_RCG_SCOPE | KYB-M730B-000 |
| GXH X AXIS GUIDE | GXH X AXIS GUIDE |
| ASSY,SPRING,FLAT | KYM-M862H-000/6301592541 |
| 234F NOZZLE | 45466931 |
| RETAINING RING,EXTERNAL | 0125-ERRING-E |
| Fuji Packing | PH00991 |
| HELICAL SPRING | N210068065AA |
| NOZZLE FILTER(10K) | KYF-M8645-000 |
| HNS,EXT-POWER-FDR | KYB-M370R-000 |
| G5S ASSY_SHAFT | KYB-M700V-000 |
| NPM 230C NOZZLE | N610040784AD |
| B-234 NOZZLE | 47561103-B-234 |
| NOZZLE(Y TYPE) | KYB-M382A-000 |
| ASSY_GEAR (8mm) | KYD-MC12L-000/1016120W |
| DEK SQUEEGE | DEK-03T 长25CM |
| PCBA FIXTURE | FC150-130-60 |
| FILTER | K46-M8527-COX |
| BELT_TIMING | KYA-M914W-000 |
| BELT | N510060977AA |
| UNIT-IO(DOM4G) | KYF-M8602-000 |
| AIR_LINE_EQPT | KYB-M704D-000 |
| SPRING COMP | KYD-MC13T-000 |
| BELT | N510065133AA |
| LEVER(SUP) | KYD-MC20D-000 |
| BELT TIMING | KYA-M9152-000 |
| BOLT,HEX.SOCKET HEAD | KYK-M86NS-000 |
| WASHER | 92902-03100 |
| NPM 256CS NOZZLE | NPM 256CS NOZZLE |
| ETC MOTOR PKRK93S-2 | 2P 300W |
| F8 SENSOR-PELEC | KYF-M8609-000 |
| HV31 NOZZLE | KYL-M7718-000 |
| COUPLING | KYK-M86AW-000 |
| NPM 185 NOZZLE | N610070338AB |
| LEVER | KYB-M3T21-000 |
| KIC ON BOARD | 6-10 CHANEL |
| ASSY_GEAR | KYD-MC412-000 |
| LEVER | KYB-M3T22-000 |
| GEAR | KYK-M864C-000 |
| PCB-MOUNT | KYK-M861W-000 |
| BUCK_UP_PIN | KYA-M3802-000 |
| BLOCK | KYL-M86KC-000/211G5472 |
| CYLINDER | KYL-M869A-000 |
| SONY NOZZLE | CF25200 |
| 222L0935 Sigma-G5 Y AXIS GUIDE_LINEAR | KYF-M867L-000 |
| NPM 226CS NOZZLE | N610040783AB |
| ASSY_SPRING_FL | KYD-MC20U-000 |
| BELT | N510021326AA |
| SPRING COMP | KYD-MC422-000 |
| VALVE | 4-187-212-01 |
| MOTOR_AC-SERVO | KYK-M86T6-000 |
| SLIP RING | KYB-M7027-000 |
| SPRING | P/N:0730C-0252 |
| MOTOR,AC-SERVO | KYK-M860P-000 |
| ASSY GRIP | KYD-MC21H-000 |
| ETC MOTOR | PK2K93S-2D |
| PCB-MOUNT G5 CUP2 | KYF-M868C-000 |
| GXH-1 FILTER | KYL-M860S-000 |
| FEEDER CABLE | KYL-M869D-000 |
| CAM FOLLOWER | KYB-M704A-000 |
| POWER SUPPLY | 11632XA |
| CASE-CONN | KYF-M860Y-000 |
| VALVE | SY3120-MZD-C6-F2 |
| PULLEY,FLAT GXH | KYL-M8681-000 |
| NOZZLE (U TYPE) | KYB-M3828-000 |
| DISK | KYB-M3T1A-000 |
| MOTOR_AC-SERVO | KYA-M700N-000 |
| PIN,HINGE | KYB-M3T2Y-000 |
| ASSY_LEVER(L) | KYD-MC11M-000 |
| Fuji Filter | AA1FZ04 |
| DD MOTOR | KYF-M860E-000 |
| MICRO METER | 350-251-30 |
| MOTOR,AC-SERVO | KYL-M867G-000 |
| FUSE | KYL-M86KH-000 |
| GXH SPECIAL NOZZLE | 13053 |
| PIN-GAUGE | KXF00YHUA00 |
| YG12 BELT | KHY-M9129-10 |
| PLATE | N610014970AE |
| COGNEX BOARD | KYK-M86PW-000 |
| NPM 235CS NOZZLE | N610043815AA |
| ASSY_NOZZLE(BT06) | KYB-M77BA-A00 |
| NOZZLE(FF01) | KYB-M77F1-000 |
| PIN_GUIDE | KYB-M122F-000/216F0879 |
| SONY NOZZEL | AF10071 |
| SONY NOZZEL AF12082 | AF12082 |
| UNIT-DRIVER | KYK-M861A-000 |
| GERA(HASUBA) | KYD-MC131-000 |
| ASSY_SUPPRESSOR | KYD-MC10R-000 |
| COVER | KYK-M86RD-000 |
| SEAL | KYT-M862W-000 |
| 938 NOZZLE | 00322592-05 |
| BALL | 4-719-920-01 |
| BLOCK | KYA-M7027-000 |
| MOTOR_DC | KYD-MC410-000 |
| ASSY GEAR | KYD-MC20K-000/0926220R |
| 0603 CPK JIG CHIP(KOA) | KOA RK73Z1HTTC |
| SPRING_COMP | KYB-M91CS-000 |
| TIMING BELT | KYB-M919E-000 |
| NPM FILTER | N610097899AA |
| LEVER | KYB-M3T0M-000 |
| BELT | 6*3080*0.9 mm |
| BOLT,HEX-SCT 6300007626 | 91317-04010 |
| GEAR | KYD-MC23C-00 |
| SENSOR-PELEC | KYK-M861Y-000 |
| LABEL FEEDER FOR HITACHI | GL-00100 |
| GS-FB100 VIBRATION FEEDER | KYD-MCHA0-R00 |
| GT-24040B FEEDER | KYD-MCN00-00 |
| ASSY_GEAR | KYD-MC40F-000 |
| PIN-GAUGE | KXF00YHTA00 |
| POWER SUPPLY | 1-474-020-11 |
| BOTTON | ZB6-EB3B |
| COVER (12/16mm) | KYD-MC20Y-000 |
| PIN_HINGE | KYD-MC41U-000 |
| LINE-SENSOR | KYF-M8607-000 |
| TAIL PIVOT | P/N:0740C-0109 |
| UNIT_DRIVER | KYK-M860F-000 |
| GUIDE,LINEAR | KYK-M86LE-001 |
| ASSY,SPROCKET | KYM-M862A-000 |
| GUIDE,LINEAR | KYK-M860S-000 |
| SONY E1000 FILTER | 4-761-920-01 |
| HNS,LIGHTING | KYF-M861W-000 |
| CASE-CONN | KYK-M860Y-000 |
| BRACKET | KYL-M86KD-000/211FC709 |
| V8V11 (MOTOR_HL) | KYA-M700S-000 |
| COVER(RB) | KYD-MC10L-000 |
| ACCESSORY,SV | KYL-M861C-000 |
| NOZZLE | HG53G |
| GEAR | KYU-M868B-000 |
| ASSY,GUIDE,LINEAR | KYL-M861U-000 |
| 8mm FEEDER JIG TAPE | KYH-M8601-00 |
| GEAR | KYD-MC23C-000/6301352305 |
| NPM H16 SENSON | N510054833AA |
| NOZZLE(HB03C) | KYB-M7720-100 |
| SONY MOTHER BOARD | 1-797-651-12 |
| PIN_HINGE | KYD-MC42S-000 |
| PIN,HINGE | KYB-M3T31-000 |
| NOZZLE_SHAFT | KYF-M8619-000 |
| VALVE | 2-673-684-01 |
| PIN,LOCATE | KYD-MCN3N-000 |
| SI -F130 REC PLUNGER KIT | A-1067-852-A |
| NOZZLE_HV13C | KYA-M7713-000 |
| ASSY_LEVER | KYD-MC212-000 |
| ASSY_NOZZLE(VA06) | KYK-M7720-A00 |
| GREASE FOR PANASONIC | N510048188AA |
| GEAR | KYD-MC21U-000 |
| SENSOR,PELEC | KYL-M8609-000 |
| GUIDE | KYD-MC11T-000 |
| GUIDE LINER ASSY. | KYL-M866D-000 |
| COVER ASSY | X-4700-067-4 |
| GEAR | KYD-MC20K-00 |
| COUPLING | KYB-M702C-000 |
| Encoder Read Head For Universal | 49566101 |
| CLAMP_GUM | KYB-M3T1R-000/0920H153 |
| 360F NOZZLE | 45466917 |
| BOLT-HEX-SCT | 90990-01J135 M2.5*6 |
| PIN_LOCATE | KYD-MC21Y-000 |
| BOLT,HEX.SOCKET HEAD | 91312-03004 |
| BUSH,BEARING | KYB-M3T3S-000 |
| CORD,BCR | KYF-M86NC-000 |
| HNS,CORD | KYL-M8621-000 |
| ECLIP,0625 | P/N:0062-ECLIP-E |
| FFU | MX--575-A |
| 16mm FEEDER JIG TAPE | KYH-M8603-00 |
| UNIT,I/O | KYL-M86LV-000 |
| SENSOR,PELEC | KYK-M86DE-000 |
| BELT | 00200341-01 |
About Us
Merex Techonologies Co.,Ltd
In 2016, Shenzhen merex Technology Co., Ltd. was established to build a more timely and effective
communication platform, and realize the company's service tenet of serving leading customers.
The engineers of the company are professional technicians who have been certified by the original
factory for more than 10 years. They always adhere to the value of putting the interests of customers
first, and provide customers with high-quality equipment accessories, consumables, fixtures and
technical support services.
In order to effectively reduce the cost of customers, the company set up a machining plant, and
changed most of the feeder parts to self-produced parts, so as to ensure sufficient inventory and
reduce the cost of customers at the same time
SMT technical service - 20 years
SMT parts sales - 18 years
Export to foreign customers - 6 years
Fixture development and manufacturing - 5 years
It is precisely because meire technology has the following advantages over the same industry that
more and more customers choose meire as their preferred supplier.
Professional pre-sales advice support
Excellent after-sales technical service
One stop solution for SMT accessories
Flexible payment and return policy
Stock in the factory with sufficient stock and fast delivery
Merex is a professional company engaged in SMT one-stop technical services, mainly engaged
in Hitachi, Yamaha, Panasonic and other SMT equipment and accessories, with a professional
after-sales service team, committed to rapid, efficient and low-cost solutions to all kinds of SMT
problems encountered by customers in production. In addition, the company also developed
automatic feeder calibrator, Cpk test fixture and other related products, and obtained national
patents. Welcome agent!
All engineering personnel of Merex are trained by the original factory, with advanced testing
instruments and a full set of technical documents. The average SMT related work experience
is more than 15 years, so our response speed and technology are better than others
Merex pursues the quality and details of the mechanism, and strives to deliver every product
to customers as a top-quality product. No matter domestic or overseas customers, we have
unified standards. If there are problems occasionally, we promise to deliver goods first to
minimize the loss caused by downtime.
