High Performance STM32 MCU Development Boards STM32F407IGT6-02
- MCU core board connector: for easily connecting the Core407I
- CAN1 interface: communicates with accessory boards which feature the CAN
device conveniently
- PS/2 interface: easily connects to PS/2 keyboard and/or mouse
- DCMI interface: for connecting camera module
- I2C2 / I2C3 interface: easily connects to I2C peripherals such as I/O expander
(PCF8574), EEPROM (AT24Cxx), etc.
- SPI1 / SPI2 interface
- easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD
card, MP3 module, etc.
- SPI1 features AD/DA alternative function, supports connecting AD/DA
module as well
- I2S2 / I2S3 / I2C1: for connecting I2S peripherals, such as Audio module
- SDIO interface: for connecting Micro SD module, features much faster access
speed rather than SPI
- USART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
- CAN2 interface: communicates with accessory boards which feature the CAN
device conveniently
- 16-bit FSMC interface: easily connects to peripherals such as NorFlash, SRAM, etc.
- 16-bit FSMC + SPI interface: for connecting touch screen LCD
- 8-bit FSMC interface: easily connects to peripherals such as NandFlash, Ethernet,
etc.
- UART1 interface: easily connects to RS232, RS485, USB TO 232, etc.
- Ethernet interface: easily connects the MCU to ethernet network by using an
additional ethernet module
- ULPI interface: for connecting high-speed USB peripheral (the STM32F407I
integrates USB HS controller without any PHY device)
- USART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
- ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as
temperature sensor (DS18B20), electronic registration number
(DS2401), etc.
- 5V DC jack
- 5V/3.3 V power input/output: usually used as power output, also common-grounding with
other user board
- MCU pins connector: all the I/O ports are accessible on expansion connectors for
further expansion
- 74LVC139: used for FSMC expansion, make it possible to connect multi
devices through FSMC at the same time, such as LCD and NAND FLASH
- LEDs: convenient for indicating I/O status and/or program running
state
- User key: convenient for I/O input and/or interact with running code
- Wake-Up button: wake up the STM32 MCU from sleep mode, also used as regular
user key
- Joystick: five positions
- Crystal empty slot (on bottom side): for soldering 50M active crystal oscillator, which'll provide
clock to DCMI
- 74LVC139 selection jumper: for FSMC chip select
- PS/2 jumper
- LEDs jumper
- User key / joystick jumper
For jumpers 27-30:
- short the jumper to connect to I/Os used in example code
- open the jumper to connect to other custom pins via jumper wires
Competitive Advantage:
Warranty :180days for all goods
Free shipping:Order over $600 win a free shipment fee:goods weight
below 3Kg.
Mega Source Electronics stocks components ready to ship. Hard to
find, obsolete and highly allocated integrated circuits and
semiconductors are all can be found by us.
Mega Source Electronics has established a well-developed logistics
system and global logistics network, which can guarantee our
service very quick, convenient and efficient.