40L Portable Stainless Steel Pressure Steam Sterilizer Class II

Set Temperature Arbitrarily Stainless Steel Liner Vertical Autoclave Sterilizer

Vertical Autoclave Sterilizer Description:

Vertical steam autoclave sterilizer is a rapid, reliable disinfection and sterilization equipment upon using of pressure-saturated steam. It is suitable for medical and health undertakings, scientific research, agriculture and other units.XFH series vertical steam autoclave sterilizer is users favorite model. It gas fully stainless high-alloy steel structure with a long using life.

Set Temperature Arbitrarily Stainless Steel Liner Vertical Autoclave Sterilizer Matters needing attention:

1. can't use the high pressure steam sterilizer sterilization any damaging material and material containing alkali metal elements, disinfect these items will lead to explosive or corrosive tank and internal piping, and damage to the gasket.

2. its salty liquid leakage or spill, must be timely clean, along the cover sealing ring to thoroughly dry, otherwise it will corrode containers and pipes.

3. before opening the lid, to confirm that pressure has rendered under the "0 / npa".

4. absolutely not allowed to change the products without authorization.

5. do not use the instrument near the explosive gas.

Vertical Autoclave Sterilizer Features

1. The temperature control display accuracy is 0.1 degrees, and the LED digital displays the temperature, time and fault alarm code in the sterilization chamber.

2. Process control: "water injection, heating, sterilization, drying, exhaust, alarm, complete automatic control of the whole process", the indicator light flashes to show the current working status.

3.  Adopt gravity displacement and positive pressure pulsation exhaust mode to exhaust the load and cold air in the sterilization chamber, built-in water tank, and exhaust a small amount of steam outside.

Vertical Autoclave Sterilizer Security

1. Over-temperature automatic protection device: the system automatically cuts off the heating power when the set temperature is exceeded;

2. Anti-dry protection device: when the water level is too low, the system automatically cuts off the heating power;

3. Over pressure automatic relief device: if the opening pressure of the safety valve is exceeded, the safety valve will open and release the pressure;

4. Overcurrent protection device: When the equipment current is overloaded, the overcurrent protection switch will act, and the system will automatically cut off the power supply;

5. Leakage protection device: When the equipment has a leakage fault, the system will automatically cut off the power supply.

6. Safety interlocking device: a new type of pressure and temperature double safety interlock, the door cannot be opened after the equipment is pressurized.

7. Door detection device: Only when the sterilizer door is closed in place, the power supply can be turned on and heated to produce steam.