Spring Type Safety Valve High Pressure Relief Valve Vertical
Autoclave Sterilizer
Vertical Autoclave Sterilizer Advantage:
◆ Fully stainless high-alloy steel structure
◆ Digital window LCD display working status
◆ Auto discharge the cool air, and steam discharging automatically
after sterilization
◆ Automatic off of heating elements at reducing of a water level
◆ Automatically shut off with beep reminding after sterilization
| Chamber volume | 40Lφ340*425MM |
| working pressure | 0.1-0.22MPa |
| Working temperature | 120-134℃ |
| Max working pressure | 0.23 Mpa |
| Heat average | ≤±1℃ |
| Timer | 0~99min or 0~99hour59min |
| Adjustment of temperature | 105~134℃ |
| Power | 3.5KW |
| Overall dimension | 570*570*1250MM |
| G.W/N.W | 55KG |
Vertical autoclave sterilizer standard operating procedures cool
after use:
the sterilization after termination of power off first, small cock
the vent valve handle exhaust (attention should be paid to prevent
steamOutburst cause burns!) , after 5 minutes, back pressure gauge
pointer "0" position after opening the container cover. When you
start the container lid must put down the wing nut evenly unscrew
them one by one, can remove the container cover.
Note: the liquid or glass containers costumed disinfection, do not
immediately after expiration of the sterilization exhaust, exhaust
conducts rapidly On, fluid boiling and overflow may even make
containers burst. Should make its natural cooling 20-30 minutes, or
when the pressure gauge pointer back to zero, must open the
deflated idle, can open the container cover to take out the
sterilized items.
Vertical autoclave sterilizer safety and maintenance:
1 this sterilizer is steam pressure container, in the use of
impact of avoid by all means, overpressure is forbidden to use;
Such as pressure gauge pointer indicated pressure has been more
than 0. 165 Mpa and the relief valve, throw not exhaust, should
immediately stop the use and safetyValve may have failed, should
repair, replace the relief valve, and ensure the safety valve
performance qualified can be put into use again.The relief valve
should check at least once or twice a year, to keep its proper
sensitivity and accuracy, so as not to cause safety accidents.
2 pressure gauge pointer before use should be in "0"
position, otherwise, the response to the pressure gauge for repair
or replacement.Pressure gauge, should check at least once or twice
a year, to keep its proper sensitivity and accuracy, so as not to
cause the safety accident.
3 termination after use of the water in the container should
be put the net, the container wall and on the surface of the
electric heating tube in time scale slipping, so that more
beneficial to sterilization quality, and save energy and prolong
service life.
4 sealing washer is wearing parts, often should check the
sealing washer, when can not meet the sealing performance or
already deformation or already aging hardening should be replaced
in a timely manner.
5 sterilization items needed for the sterilization time,
steam pressure/temperature corresponding relationship see table
(for reference only) disinfection sterilization time needed for
items, steam pressure/temperature corresponding to the table (for
reference only)
