|
[China]
Trade Verify
Address: Room 201,Building H,33 Ping’an Avenue,Xinnan Community,Pinghu street,Longgang District, Shenzhen China 518111
Phone: 86-852-28167037
Contact name:Lisa Xiao
Shenzhen Kenid Medical Devices CO.,LTD |
|
Verified Suppliers
|
|
|
Agfa / Fuji Medical X-Ray Film , Radiography Portable Laser Printer Film
Features
Waterproof, thinner,wearable,easy to store.
Scratch-resistant, can be stored for years with high quality.
White base, can be signed directly on the surface.
The film base has excellent degradability.
Description:
Medical Paper Film(KND-K)has image layer and protect layer on
different side of polyester bases, and there are no sensitive
silver halide in both layer. The film is fit for laser printer to
print digital image which is processed and stored in the computer,
to attain the enhanced x-ray image quality. Compared to traditional
silver halide processing, the procedure is more convenient and the
speed of processing is faster. Meanwhile, it reaches to the goal of
environment protection because the whole procedure is free of the
Chemicals.
The image published by this film is of low fog, high-sharpness,
high max density, and bright tone, it can be used directly on
KONIDA laser printers.
Processing
The product can be directly printed with Konida laser printers
KND-DRYTEC-3000 or KND-DRYTEC-4000 to get ideal image.
Storage
Please store the film in cool and dry place without dust. Keep away
from direct sunlight, acid or alkaline gas. Details as follows
1. Temperature and humidity,temperature 10℃～23℃, humidity
30％～65％RH, keep away from the heat resource.
2. Gas,There are no hydrogen sulfide, ammonia, sulfur dioxide,
formaldehyde, and any other alkaline gas, etc.
3. Pile,Please keep film upright to avoid the bad influence caused
by pressure.
Period of validity
The period of validity is 30 months under above environment.
Conditions of usage
The best condition of usage as following
Temperature 18°C~24°C, humidity 50%~65%RH.
Notes
1. Store the film under the conditions specified above.
2. Take the film out of the cool place and place the film with the
package in the place where the film will be used for at least 4
hours, to avoid the steam concentrate on the film and damage the
film.
3. It should be careful to handle the film, don’t crash, fold,
distort and rub the film, don’t touch the film with wet hand.
4. Dealing with the waste film should obey the local law and
regulations.
Package and Size
1.Konida Medical Laser blue film KND-K, Suitable for Konida laser
printer
KND-DRYTEC-3000,KND-DRYTEC-4000.
Name | Model type | Size | Sheets/box | Boxes/case | |
Konida medical Laser blue film | KND-K | 8in×10in | 20cm×25cm | 200 | 5 |
10in×12in | 25cm×30cm | 200 | 5 | ||
11in×14in | 28cm×35cm | 200 | 5 | ||
14in*17in | 35cm×43cm | 200 | 5 | ||
Applications:
The product can be directly printed with Konida laser printers
KND-DRYTEC-3000 or KND-DRYTEC-4000 to get ideal image.
Competitive Advantage:
Compared to traditional silver halide processing, the procedure is
more convenient and the speed of processing is faster. Meanwhile,
it reaches to the goal of environment protection because the whole
procedure is free of the Chemicals.
The image published by this film is of low fog, high-sharpness,
high max density, and bright tone, it can be used directly on
KONIDA laser printers.
