Active Member
|
[China]
Address: Room 708, Building 14, Hairun Binjiang A District, Taijiang District, Fuzhou City, Fujian Province
Contact name:Li
Fuzhou Sion Trading Co., Ltd. |
|
|
Push Button Air Release Valve Presure Reducing Valve Medical Pressure Safety Plastic Check Valve
Specification
| Part No. | Material | Type | Opening Pressure | Back Pressure | Port Size/Tube ID |
| CJT028 | ABS+SILICONE | Diaphragm | 0-1Kpa | <=300Kpa | 1/8(3.2mm) |
| Available Sizes | 1/16(1.6mm),1/8(3.2mm),3/16(4.8mm),1/4(6.4mm), 5/16(7.9mm),3/8(9.5mm) | ||||
| Optional Body Material | ABS,PP,PC,PA66,PVDF,etc. | ||||
| Optional Material | Silicone/VMQ,Viton/FKM,Fluorosilicone/FVMQ,NBR,EPDM etc. | ||||
Size
| Port Size | Accessories Introduction(OD and ID) | Applicable Accessories(Hose/tube/Pipe Size) | |
| Silicone | TPU | ||
| 1/8” Diaphragm Valve | OD:4.4 ID:1.9 | OD:6 ID:3 | OD:5.5 ID:3.5 |
| 3/16” Diaphragm Valve | OD:6 ID:3.1 | OD:7.5 ID:4.5 | OD:7 ID:5 |
| 1/4 ” Diaphragm Valve | OD:7.8 ID:3.1 | OD:9 ID:6 | OD:9 ID:7 |
| 5/16” Diaphragm Valve | OD:9.5 ID:6.5 | OD:11 ID:8 | OD:10.5 ID:8.5 |
| 3/8” Diaphragm Valve | OD:10.6 ID:6.5 | OD:12 ID:9 | OD:11.5 ID:9.5 |
| According to different uses, our company can provide matching parts that meet NSF, FDA, ROSH and other standards. | |||
Features and advantages
1. Simple structure
2. Can be used for gas and liquid
3. Complete specifications
4. Comparative cost advantage
Sterilization
Sterilization conditions ethylene oxide sterilization
MSDS
If there is a demand, please specifically consult a sales engineer
Customized information
If necessary, please contact us. We can mention PPAP, test report, multi-material report and other detailed information
Material Certificate
Packing description
PE bag packaging, outside carton, packaging requirements can be customized, such as individual packaging, double packaging
Disclaimer
DISCLAIMER: Functional performance is measured under laboratory conditions according to Test Protocols and relates
only to the samples tested. Recommend validating fitness for use of the selected parts in their specific application.
The test data in this document are not for specification purpose. Media resistance and service temperature range
are indicative. Please contact us for specific media and temperature exposures. This is provided for general
information purposes only. It is accurate and correct to the best of our belief; however, disclaims any warranties,
expressed or implied, as to this information and assumes no obligation or liability therefore. Much of this information
is proprietaryto provide this information and does not waive or release any patent, copyright, or other proprietary
right it may ownin this information.
