Hand Sanitizer Dispenser/Non Contact Gel Soap Dispenser / Automatic
Induction Alcohol Sanitizer Spray Dispenser Machine
Application scenarios
It is suitable for
kitchens,washrooms,bathrooms,schools,kindergartens,offices,restaurants
, bars , Internet cafes , KTV , supermarkets , hospitals and other
public occasions or at home .
Product description
Rapid liquid extraction
removable back panel
No drilling
Automatic sensing
infrared induction, contact free drainage and rejection of cross
infection, distant sensing
single liquid output 1ml, no waste of quantitative liquid output
- Automatic Hand Sanitizer Dispenser Wall Mounted: Automatic Hand
Sanitizer Dispenser Wall Mounted with Sensor, Put your hand under
the sensor 8-12cm, and let the dispenser to start working for
continuously until liquid soap come out from nozzle, Fast hand
disinfection and prevent cross infection(NOTE: When you use
dispenser at first time, there was some air in the pump, you need
work dispenser several times until liquid soap or foam drop down)
- Safe&Environment Simple Human Touchless Foam Soap Dispenser:
Simple Human Soap Dispenser Automatic Using High-Performance Motor
and Infra Red Detection, Durable ABS+PC Material, with good impact
resistance and corrosion resistance, Suitable for Hospital,
Kitchen, Bathroom, Barber Shop, and Toilet of Restaurant, Hotel,
Office, Public Area, etc.
- Leak-Proof Design of Refillable Sensor Pump Hand gel Dispensador:
Hand gel Pump Dispensador with Spray Head Using Leak-Proof Design,
Prevent liquid dripping and maintain hygiene, Low consumption,
safety, convenience, Cleanness. Soap dispenser is suitable for soap
liquid, Foam dispenser is suitable for foam liquid, It can't be
mixed, Can Meet The Needs of Kids/Adult and Any Other Family
Members
- Ergonomic design & Perfect Service: Split and combined design,
easy to install and disassemble, Use the mounting plate or Sticker
as a template to mark the position, Slide the dispenser in the
mounting plate, Do not install the dispenser with less than 2 inch
height beneath the table.If you have any questions during use,
please contact us in good time. We offer reliable customer
service.(NOTE: Do not install the dispenser above the mirror
surface or above flowing water)
Installation
Choose a suitable place to install this dispenser,do not install it
on the mirror surface and keep 40cm free from sensor
1. Pull mounting plate down out of the back.
2. Mark three holes,then drill three.
3. Fix the mounting plate firmly on the wall.
4. Open the battery compartment,and put four AA alkaline batteries
into the battery compartment to ensure the battery direction is
correct.
5. Installing the backplane on the back.
6. Open the top cover and fill in the hand sanitizer.
7. Turn on the power switch.