|
[China]
Trade Verify
Address: Building #21, Block 9299, Tingwei Road, Jinshan District, Shanghai 201505(Headquarter and Sales Office: Shanghai Phidix Trading Co., Ltd.)
Contact name:lisa
Phidix Motion Controls (Shanghai) Co., Ltd. |
|
Verified Suppliers
|
|
|
Gear Shift Control Cable Assembly Mechanical Control Cable Flexible Shaft For Mining/Oil Drilling Equipment
【 Product Description 】
Custom control cable assemblies are our principal products. This is
where our expertise provides the ultimate in smoothness and
efficiency. The low friction ‘feel’ comes from two basic
components: a sliding flexible innermember and a flexible outer
conduit.
Custom control calbe assemblies are offered in a wide range of
sizes and materials designed for safety, strength and efficiency —
from miniature cables to extra heavy duty cables capable of 1200lb
compression, 3600lb tension. Contact us to discuss your exact
needs.
【 Conduits & Inner-members with Different Loads 】
| Type | Minimum Turning Radius(Inch) | Stroke Loss Coefficient / Degree |
| VLD | 2 | 0.00015 |
| LD | 3 | 0.0002 |
| MD | 5 | 0.00025 |
| HD | 6 | 0.0003 |
【 Technical/Application Data(Industrial Controls Warnings) 】
The following warnings describe important push-pull cable operation
and maintenance information
1. Do not adjust the control cable with the power on or the engine
running. Serious injury or death could result.
2. A gradual or sudden increase in the no-load friction (cable
disconnected at both ends) of a control cable is an indication of a
pending or present performance problem. The control cable should be
replaced, otherwise serious injury or death may result.
3. A gradual or sudden decrease in the usable stroke, is an
indication of a pending or present performance problem. The control
cable should be replaced, otherwise serious injury or death may
result.
4. Control cables which have moisture inside of them and/or have
frozen should be replaced. Do not apply heat to thaw or dry control
cables.
5. Control cables are lubricated for the life of the control cable.
Do not remove the seals or lubricate the control cable.
6. Control cables are designed to be non-repairable. Do not attempt
to repair this control cable.
【 Structure 】
【 Push-Pull Standard Specifications 】
All line art dimensions are represented in inches
【 Real Picture 】
