Active Member
|
[China]
Address: NO.210, Long'an Road, Longquan Area, Chengdu, China
Contact name:Jiangyan Leng
CHENGDU MANUFACTURED D&C TECHNOLOGY CO., LTD |
|
|
MDC MG-05 Vacuum Brazed Diamond Grinding Discss with Long Lifetime
Parameters
| Type | Size(mm) |
| MG100-05 | 100×16×1.5 |
Grinding of marble ,artificial stone and ceramic tiles;
Grinding of fiber reinforced plastic(FRP), silicon carbide and reinforced plastic
Usage Case
| Tools | Workpiece | Lifetime | Efficiency |
| The Sintered Disc | Marble Table-board | 5000cm2 | 26s |
| MDC Vacuum Brazed Grinding Disc | Marble Table-board | 15000cm2 | 20s |
| The Resin Bond Blade | FRP Slab | 7000m2 | 40s |
MDC Vacuum Brazed Grinding Disc | FRP Slab | 28000m2 | 20s |
★The Lifetime of MDC Vacuum Brazed Diamond Grinding Disc is as long as Sintered Disc ,and the efficiency is improved by 30% for grinding Marble Table-board.
★The Lifetime of MDC Vacuum Brazed Diamond Grinding Disc is 40 times longer than resin bond grinding disc, and the efficiency is improved by 100% for grinding FRP slab.
| Company | Address | ||||||||||
| Contact | |||||||||||
| Tel | Fax | ||||||||||
| Parameters Related | |||||||||||
| Workpiece | Name | Material | Hardness | ||||||||
| Processing Form | □ Cuttuing □Grinding | ||||||||||
| Processing Mode | □ Rough □ Semi-finish □ Finish | □ Interrupted □ Continuous | Roughness | Size of Workpiece | |||||||
| Maching Equipment | Brand of Equipment | Power of Equipment | Rotating Speed of Equipment | ||||||||
| Mode of Equipment | □ auto-matic □ Handheld | The Itme No. of sample expected | |||||||||
| Information of diamond tools used before or using now | |||||||||||
| Specification | Processing Form | Rotating Speed using | lifetime | ||||||||
| Brand | Cooling water | □ need □ no-need | Monthy Quantity (pieces) | ||||||||
| More Information of Product | Tooth shape | Thickness of Tool | Grit of Diamond Abrasive Material | Width of working Layer | |||||||
| Tool failure of change reason | A.wear B.Edge Cracked C.Thermal Fatigue D.Diamond abrasives fell
off E.Bad roughness F.Low efficiency G.Short lifetime H.Big shock I.Loud noise J.Others | ||||||||||
| Mark in the blanks of following factors you valued most of the tool or write below others | |||||||||||
| Efficiency | Cost | Roughness | lifetime | Others | |||||||
| No dust or thers | |||||||||||
| Remark | Here you can write something you want us to pay special attention | ||||||||||
