CHENGDU MANUFACTURED D&C TECHNOLOGY CO., LTD |
Adress:NO.210, Long'an Road, Longquan Area, Chengdu, China |
Tel:+86-28-68903991 Fax:+86-28-68903992 Email:yan.c@mdc-tech.com |
Application Form of Free Samples |
Company | | Address | | |
Contact | | Email: | | |
Tel | | Fax | |
Cutting Paramerters Related |
Processing form | | A.Turning | B. Boring | C. Milling |
Machine equipment | Brand and series no. | Quantity (pcs) | Max. Speed of spindle(rpm) |
| | |
Workpiece | Name (like Roller,Pump,Gear etc.) | Material (like cast iron, HSS, hardened steel etc.) | Hardness(HRC or HB) |
| | | | | |
Cutting Modes | | A.Rough | B.Semi-finish | C.Finish |
| A.Continuous cutting | B.Light interrupted cutting | C.Middle interrupted cutting | D.Heavy interrupted cutting |
RA | Cutting speed(m/min) | F(mm/r) | Cutting depth ap(mm) | Dry or wet cutting |
| | | | |
Information of cutting tools used before or using now |
Brand | Mode Code | AP | Vc or N | Lifetime(pcs/tip) | Dry or wet cutting |
| | | | | |
Tool failure or change reason | | Quantity of tool using per month | |
Tool failure or change reason: A. Rake face wear B. Flank wear C.
Chipping D. thermal fatigue E. Breakage F. Roughness |
If the tool is milling cutter, please fill the blank follow also.
If not, ignore it. |
Main angle | Tooth | Width of cutting | Cutting quantity per tooth |
| | | |
Mark in the blanks of following factors you valued most of the
tool, or write below others. |
Efficiency | Cost | Precision | Tool working time | Others |
| | | | | |
Notes | | (here you can write something you want us to pay special attention) |