Active Member
|
[China]
Address: Room 601, Xuri Building, Taishan Street,Daiyue District, Taian City, Shandong Province,China
Contact name:Michael
Shandong Mingdao Heavy Industry Machinery Co.,Ltd |
|
Metallurgy Crane Double Girder Overhead Casting Crane for Your Need
Brief Introducion:
This QDY double girder Metallurgy Bridge Crane is mainly used in
the place where the molten metal is lifted. The working duty of the
complete machine is A7, and thermal protective device is added on
the bottom of the main girder.
The assembling and test of the crane conform to the document
No.ZJBT[2007]375 which was issued by General Administration of
Quality Supervision, Inspection and Quarantine of the People's
Republic of China.
It can be also used in the place where molten nonmetal material and
red-hot solid metal lifting work.
Environmental conditions:
Power supply: 380V/50HZ/3PHASE or on request.
The temperature of working environment is -10~+60°C;
The relative humidity is less than 50%;
Technical Parameters:
| Lifting Capacity | T | 5 | 10 | 16/3.2 | 20/5 | 32/5 | 50/10 | 74/20 | |
| Span | m | 10.5-31.5 | |||||||
| Speed | Main Hook Lifting | m/min | 15.5 | 10.4 | 10.7 | 9.8 | 7.8 | 7.8 | 6.1 |
| Aux. Hook Lifting | 14.6 | 15.5 | 15.5 | 10.4 | 9.7 | ||||
| Traveling of Trolley | 37.2 | 43.8 | 44.6 | 44.6 | 42.4 | 39.3 | 33.8 | ||
| Crane travelling | 92.7/93.7 | 92.7/93.7 | 76/89 | 76/89 | 89/75.3 | 75/76.6 | 67.3 | ||
| Operational Model | Cabin | ||||||||
| Working Duty | A7 | ||||||||
| Power Supply | Three-phase A.C. 380V, 50Hz or customized | ||||||||
Product Details Photo:
Safety Devices for overhead bridge crane:
To guarantee the normal operation of crane and avoid the personal casualty and mechanical damage, the safety device we provide are not only the electric protective devices or alarm bell but also other
equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device
To Check The Production Factory Scene OF MD Cranes ,please ClIKE HERE.
MD Crane Cases in China Domestic and International Market:
Company certificates:
MD Crane will do more than the certificates required to guarantee the quality of our cranes.
Product Shipping:
FAQ ABOUT MD CRANES:
1.Can the cranes be customized?
Yes,every customer’s working condition is different, all of our
products can be customized depend on customers’ requirements.
Please give us the information as clear as you can, so we can give
our best design to suit for your demands.
2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote
control type or cabin control type.Please tell us what kind of
operation way you need.
4.I have low headroom in my workshop, is it possible to install a
crane in it?
We have special products for low headroom workshop, our engineer
can give the best design according to your dimensions.
5.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook,
electromagnetic, grab bucket etc...
6.In order to offer the most suitable design solution for you, it
will be great helpful if you can offer us the following information
to us:
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the
rails? How long is it?
5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the
drawing photo of your workshop.
Customized Design &Production Accepted According to Your Using
Situation, Please Contact Us for Further Communication:
Email/Skype: sales@md-cranes.com
Tel/whatsapp:+8613953895525
Or
Just send inquiry to us, we will do the rest for you!
