LD Model 5ton Lift Capacity 22m Span Length Top Running Single
Girder Bridge Crane
LD model single girder overhead crane is characterized by more
reasonable structure and higher strength steel as a complete crane.
It uses together with CD1 model MD1 model electric hoist as a
complete set, it is a light duty crane with a capacity 0.5 ton ~
32ton. The span is 7.5m~ 22.5m. Working duty is A3~A5, working
temperature is -25-40℃.
This product is widely used in plants, warehouse,steel plant,steel
yard, material stocks etc to lift goods. It is prohibited to use
the equipment in the combustible, explosive or corrosive
environment(Need explosion proof type for this).
This product has two operational methods, ground(pendent controller
/remote controller) or operational cabin room .
|Main Parameters List|
|Crane Traveling Mechanism||Traveling Speed(m/min)||20||30||45||60|
|Motor||Type||Cone Squirrel-cage||Cone Squirrel-cage|
|Power(kw)||0.8*2, 1.5*2, 2.2*2||1.5*2, 2.1*2|
|Hoist Lifting Mechanism and Traveling Mechanism||Electric Hoist Model||MD1||CD1|
|Lifting Speed(m/min)||8/0.8, 7/0.7, 3.5/0.35||8, 7, 3.5|
|Span(m)||7.5-22.5 or assigned|
|Lifting Height(m)||6, 9, 12, 18, 24, 30|
|Traveling Speed(m/min)||20, 30|
|Work Duty||Intermediate Jc=25%|
|Power Supply||380V 50HZ 3P|
|Wheel Diameter||Φ270, Φ400|
Product Details Photo:
Safety Devices for overhead bridge crane:
To guarantee the normal operation of crane and avoid the personal
casualty and mechanical damage, the safety device we provide are
not only the electric protective devices or alarm bell but also
equipments as following:
1.Overload Limit Switch
2. Rubber Buffers
3.Electric Protective Devices
4.Emergency Stop System
5.Voltage Lower Protection Function
6. Current Overload Protection System
7. Rail Anchoring
8.Lifting Height Limit Device
MD Crane Cases in China Domestic and International Market:
MD Crane will do more than the certificates required to guarantee
the quality of our cranes.
Product Shipping Photos:
FAQ ABOUT MD CRANES:
1.Can the cranes be customized?
Yes,every customer’s working condition is different, all of our
products can be customized depend on customers’ requirements.
Please give us the information as clear as you can, so we can give
our best design to suit for your demands.
2.How many operation methods for my selections?
We provide pendent controller with push button control type, remote
control type or cabin control type.Please tell us what kind of
operation way you need.
4.I have low headroom in my workshop, is it possible to install a
crane in it?
We have special products for low headroom workshop, our engineer
can give the best design according to your dimensions.
5.Do you supply lift tools?
Yes, we can provide any kind of lifting tools such as hook,
electromagnetic, grab bucket etc...
6.In order to offer the most suitable design solution for you, it
will be great helpful if you can offer us the following information
1. Lifting capacity.
2. Span length.(rail center to rail center)
3. Lifting height.(hook center to ground)
4. Have you installed the rails? Do you need us to supply the
rails? How long is it?
5. Power supply: Voltage.
6. Working condition: what kind of material to lift? temperature?
7. It would be much better if it is possible for you to offer the
drawing photo of your workshop.
Just send inquiry to us, we will do the rest for you!