Active Member
|
[China]
Address: Room 601, No.419 East Jin'an Road, Shanghai, China
Contact name:Lisa Wu
MBS Hardware Co. Ltd |
|
|
30’ telescopic pole endzone camera system hard 6063 2mm thickness tube video tower system remote pan tilt head 7.2V
YG series endzone camera
| Mast material | Aluminum tube |
| Height extend | 9m /30ft |
| Transport length | 1.8m |
| Weight | 15kg –35 pound |
| Pantilt | Manual |
| Stand | 4 legs tripod –2 section, adjustable for uneven land |
| Pole rising | Manual |
| Ease to setup | Easy |
| Ease to use | Easy |
| Customized Color | Available |
| Complete system | Yes |
| HDMI cable | 8m |
| Monitor | LCD 10inch with attached battery |
| Rain gear | Yes |
| Travel bag | Yes |
| Level | Yes |
| Wheels | Yes |
Characters:
1. The Telescopic Camera mast has a minimum height of 170cm and the maximum height can be up to 18m.
2. Has tripod support and trolley base, easy to move and transport
3. mast has two types for selection, pneumatic cyliner and hand pull-up
4. top mounted quick release camara plate
5. operate plate to control the camera
6. LCD monitor screen and extension cable
7. Transproting bag
8.one 12V-10Ah battaery is equiped with a converter to 7.2V, can supply to drive motors and Camera/DV screen
9. potiontial meter controlled panhead
10. water level
| 9m high aluminium telescopic push-up mast | |
| fully extracted length (height) | 9m |
| transportation length | 1.8m |
| weight | 15kg |
| bottom diameter | 60mm |
| top diameter | 40mm |
| wall thickness | 2mm |
| number of section | 5 |
| mast material | high quality anodized aluminium strong interlock clamps made from stainless steel |
| Tripod | 4 legs |
pantilt control type:
1. remore control, electrial motor drive
2. manual control
turn the mast body around like Submarines periscope,
turn the camera up and down with a string and gears.
| Pan tilt | Screen | HDMI wire |
Electrical Include: Pantilt head Remoter battery
|
|
8 meter
|
Hand control includ Pantilt Drive string Gears Handle
| All screen have attached battery | If camera has wifi, so no need this wire |
our telescopic mast for selection
|
Usually these masts require a flat or socket wrench, with the quick release clamps you can raise and lower the masts without any tools.
