Qingdao Tengao Plastic Machinery Co., Ltd. |
|
Pp pe pc hollow cross section sheet/plate extrusion line machine
PART 1 INTRODUCTION:
This pp pe pc hollow cross section sheet/plate extrusion line
machine consists of single screw extruder, melt-pump, hydraulic
filter exchanging unit, hollowsheet die head, vacuum calibrating
table, first haul off machine, oven, corona treating unit, cooling
table, second haul off machine, trimming and length-settled cutting
units and stacker etc.
PART 2 CHRACTERISTICS OF VACUUM CALIBRATOR
1. High quality mould steel or high strength Al-Mg Alloy
2. Special harden treatment and non-sticky coating on the surface.
3. Independently controlled vacuumize device and temperature
controlling system.
4. Consist of vacuum sealing edge device.
The technology of hollow sheet die with co-extrusion feed block to
get UV+PC+UV, UV+PC hollow sheet can save 30% UV on the surface.
PART 3 APPLICATION
PP/PE hollow sheet is light and high strength, moisture-proof, good
environmental protection and re-fabrication performance and can be
used into the reusable container, packing case, clapboard, backing
plate and culet.
PC hollow sheet is widely used in construction sunroof in
buildings/halls/shopping center/stadium/public places of
entertainment and public facility; Ring shield of bus
station/garages/pergolas/corridors; Noise barriers for highways and
urban elevated road
PART 4 MACHINE CONFIGURATION :
Item | Description | Data |
1 | SJ120/35 Single screw extruder with stainless steel hopper | 1 set |
2 | Screen exchanging unit for PC | 1 set |
3 | Melting gear pump for PC | 1 set |
4 | SJ45/30 Single screw extruder for UV layer | 1 set |
5 | Melting gear pump for uv | 1 set |
6 | T-type Die head (2100mm*4-6mm) | 1 set |
7 | Vacuum calibrating board | 1 set |
8 | cooling table | 1 set |
9 | The first haul off machine with 12 rollers | 1 set |
10 | edge cutting device | 1 set |
11 | 5000mm oven | 1 set |
12 | Corona treating unit | 1 set |
13 | up and down sides, double position film laminating device | 1 set |
14 | The second haul off machine | 1 set |
15 | Tranverse cutting machine (length-settled) | 1 set |
16 | material conveyor+6000mm discharge table | 1 set |
17 | eletrical cabinet | 1 set |
other accessory machine parts | ||
18 | 500kg mixing and drying machine | 1 set |
19 | AC-25 water chiller | 1 set |
20 | 15kw air compressor | 1 set |
21 | sheet crusher | 1 set |
PART 5 MAIN TECHNICAL DATA
PP/PE Hollow Sheet Extrusion Line Technical Data | PC Hollow Sheet Extrusion Line Technical Data | ||
Extruder model | SJ-120,SJ-100 | Extruder model | SJ-120, SJ-45 |
Sheet width | 2100mm, 1220mm | Sheet width | 2100mm |
Sheet thickness | 2-8mm, 2-8mm | Sheet thickness | 4-40mm |
Max capacity | 350kg/h,200kg/h | Max capacity | 450kg/h |
Main motor power | 132kw | Main motor power | 132kw |
PART6 DELIVERY, PAYMENT AND OTHERS SERVICES
1. delivery time: 80 days after receiving the deposit
2. payment terms:30% for the prepayment by T/T and 70% for the
downpayment by T/T before delivery or irrevocable L/C at sight can
be available, too.
3. Packing details: wooden pallets and cases with stretching films
4. Guaranteed time: 18 months for the machenical parts and 12
months for the electrical parts.
5. Service: we will send 1-2 engineers to customers' factory to
help them install, test the machine and also train their workers,
but customers should bear the round tickets, accommodation, and
salary etc.
Best regards
Contact:Helen Gao
Whatsapp/Skype/Viber/Wechat: 0086 15192039505
Email: lpm@extruder-cn.com