|
[China]
Trade Verify
Address: B615, Future Fortune Building, No. 1 Wangxi Road, Zhangjiagang City, Jiangsu Province
Contact name:Kara Liu
BLOOM(suzhou) Materials Co.,Ltd |
|
Verified Suppliers
|
|
|
20Mm Plastic Machine Precise Special Product Foundation Fasteners Screws Manufacturer
1 . Description
Screw element type for each function: Feeding, Melting, Mixing,
Venting, Pressurization
Screw Configuration
means a structure composed of different combinations to achieve the
desired performance,such as disperse, shear effect, solving the
requirements of mixed materials as well as the production
stability.
Depending on the nature of work being carried out,there are Intake
Zone,Conveying Zone,Melting Zone, Natural Venting Zone,Mixing
Zone,Vacuum Venting Zone and Metering Zone.
Different screw elements own different features in different
extrusion process,we should choose and design the right screw
elements based on different extrusion status in order to optimize
the overall comprehensive performance in the extrusion process.
2 . Technical Parameter
| Base Material | 1)38CrMoAlA(JIS SACM645);2)Cr12MOV(JISSKD-11) ; 3)4Cr5MoSiV1(JIS SKD-61) ;4)42CrMo(AISI4140) |
| Bimetallic Alloy Materials | 1)Fe-based alloy2)Ni-based alloy/Deloroalloy 3)Co-based alloy4)NiCo-based alloy 5)Tungsten carbide/Wolframcarbide |
| Double-alloylevel | Level A - containing Tungsten of40% Level B - containing tungsten of 25% Level C - containing tungsten of15% |
| Surface Treatment | Heat Treatment High FrequencyTreatment Nitriding treatment(120Hours): Depth of Nitrided Layer: 0.5-0.8mm Hardness of Nitrided Layer: 900-1020Hv(HRC56°-65°) HardChrome Plating treatment: Thickness of Hard Chrome Plating Layer:0.05-0.10mm Hardness ofHard Chrome Plating Layer: ≥950HV Nickel alloyplating.treatment: Bimetallic barrel / Cylinder: Centrifugal Casting(Inlay Alloy) BimetallicScrew: Plasma Alloy Coating Spraying Depth of Bimetallic Layer: >2mm Hardness of Bimetallic Layer: HRC55°-72° Spraying corrosion wear-resisting dual metallayers |
3 . Comparsion of the output (LDPE)
Pressure is generated if resin passes over the barrier, forcing any air in the melted resin back to the feed side and effectively preventing the intrusion of air bubbles on the sub flight side. This is highly effective with resins that generate bubbles such as PS, PA, PET and EVOH.
4 . Parallel twin screw and barrel application
Brand | KEY ACTION |
Intake &Conveying Zone | For feeding and conveying the raw materials to the extruder |
Melting Zone | For heating the material to make some or all materials melt |
Natural Venting Zone | For removing the volatile matter and moisture |
Mixing Zone | For mixing the materials fully |
Vacuum Venting Zone | For completely ruling out the volatiles and water to reach the desired state |
Metering Zone | Metering Zone |
Bimetallic Treatment of Screw
The bimetallic screw for extruder twin screw is a kind of screw spray welding a 2~3mm-thick alloy coat on the screw flight of output area for the screw . The Bimetallic treatment has excellent corrosion resistance, abrasion resistance and high working temperature. And its useful service life is greatly improved contrast to the common nitrided screw.
5 . As per customer's demand,we can also supply below:
PVC/PE Film Blowing Screw;
Blow Molding Screw;
PS/PE/PP/ABS Sheet Extrusion Screw;
PE Aluminum Plate;
PPR Pipe Screw;
EVA Extrusion Screw;
HDPE High efficiency Screw;
PET Straps Screw;
XPS/EPE Foamed Screw;
Granulation Screw,Vented single screw etc.
