Active Member
|
[China]
Address: 2-627, XIANGJIANG NORTH ROAD, NEW DISTRICT WUXI CITY, CHINA .214028
Contact name:Ivan Zhao
WUXI Hai Roll Fone Science&Technology Co.,Ltd |
|
|
Semi automatic face shield making machine/face making machine/face shield machine making
1. The shape of the mask welding flower spinning of the mask machine is uniform and clear, the depth is consistent, there is no tooth loss or missing teeth, excessive welding leakage, and the ends of the mask are neat, without burrs and wrinkles. It has the advantages of simple and convenient operation and adjustment, good stability, convenient counting, accuracy and high efficiency.
2. The mask machine is also called the ultrasonic mask body machine. It is a machine for the automated production of multilayer N95 mask products. It can use 1 to 4 layers of PP spunbond non-woven activated carbon and filter materials. The entire machine is fed from raw materials. Insertion to the nose line, edge sealing, and cutting of finished products are all automated operations. Depending on the raw materials used, they can meet different standards such as dustproof, civilian, medical, and FFP2. The mask production equipment has stable performance, high output, low defect rate and easy operation.
Dimension | 7850mm(L) X3600mm(W) X2000mm(H) |
Color | warm grey + silver white International standard warm grey 1C |
Weight | ≤5000kg, ground weight capacity ≤500kg/m2 |
Working power | equipment 220VAC±5%； 50HZ；rated power 12KW |
Working air pressure | Compressed air pressure 0.5-0.8MPa; compressed air flux 300L/min |
Production efficiency | 100-110PPM(based on 20 hours each day, daily capacity about
120,000-140,000 pieces) |
Qualification ratio | 99%(excluding unqualified incoming materials, improper operation by
employees) |
Equip failure ratio | ≤2%(equipment failure itself) |
Operating environment | Temperature 10 一 35℃; humidity: 5-35%HR No flammable, corrosive gas, no dust (cleanliness no less than
100,000 grade) |
