Ship Liferaft Light Life Jacket Light For Sailing Lifesaving Indication Signal Light

Ship Liferaft Light Life Jacket Light Lifesaving Indication Signal Light

Decription:

The SM86951 liferaft light comprises three items:
1) The external light with wire
2) The internal light with wire
3) Battery body
The external light and internal light are connected with battery body by two individual wire-connectors. The
battery powers both of internal and external lights. When the liferaft is inflated, the battery can be
automatically activated by pulling out “O” ring and both of lights are activated at the same time. The external
light is a high intensity flashing light for mounting externally on liferaft to signal for rescue. The internal light
is an adequate steady light for reading inside a covered liferaft. The two units are sealed and watertight.

Product Standard

The latest SOLAS Regulation;
MSC81. (70)
ISO24408:2005

ISO9001:2008 QMS (Approval by DNV)
ISO24408:2005

Material Use:

The lamp cover is transparent, the other plastic parts could be changed the color according to the
requirement of customer.
All the plastic parts are produced in a high performance polycarbonate.

The red master switches, on the main body, are coated with clear protective plastic film, have clear

operating instructions and are simple to switch on and off individually external and internal light.
The connector wire is made in PVC.
The battery type is heavy duty lithium.
The main body and lamp cover with PCB is sealed by AB gum which has the advantaged water-proof
performance and prevent corrosion and mould growth.

Technical Parameters

Installation:

In order to ensure that the handspike could not be turned on because of strong vibration during the ocean
shipment, every light is added a safety lock on handspike before packing. So before installation, the first thing
is to pull off the lock and fit the “O” ring in the hole of handspike. Please install liferaft light according to the
below pictures.

Turn on the connector to separate the external and internal light from battery body;

Cross the external light through the fabric of liferaft and fix the external light on the apex of the canopy
like the below pictures.

The internal light should be installed inside the liferaft as same as the method of fixing external light,
where it is easily visible for reading the instruction.

Battery body should be installed the proper place inside liferaft. On the one hand, “O” ring should be fixed
tightly with something inside liferaft by cord so that it must be pulled out to automantically activate the
external and internal light when the liferaft is inflated. On the other hand, the manual switches for external and internal lights could be easily operated when the lights are working.

After fixing securely external light and internal light and battery body, connect the external and internal
light with battery body carefully and tightly. Then the whole installation is finished.

Operation:
When the liferaft is inflated, the battery can be activated by pulling out “O” ring and the external and internal
lights are activated at the same time. The user can press “internal light” switch to turn off or on the internal
light, and press “external light” switch to turn off or on the external light. These manual operations could save
discharging battery in the daytime so that the light could be used longer time. If user want to turn off these
two light completely, only it is ok to place the “O” ring back to the primary position again.

Products photos