|
[China]
Trade Verify
Address: Room 303 Jingrun Building No. 2017 Zhongshan Road, Jiaxing City, Zhejiang Province, China
Contact name:Wade.Qian
Jiaxing Seaman Marine Co.,Ltd. |
|
Verified Suppliers
|
|
|
Carbon Fiber Composite Cylinder 6.8L Breathing Apparatus Spare Cylinder
Carbon fiber composite material cylinder is light weight & reliable, and it's fit for equipped on SCBA for more comfortable wear
It is designed with 15 years lifetime, and need to be inspected every 3 years.
The carbon fiber cylinder is conform to the EN 12245.
1. SPECIFICATIONS:
Part No.: CRP Ⅲ-144-6.8-30-T
Volume: 6.8L
Gross Weight: 3.8kgs
Standard: EN12245
Working Pressure: 300Bar
Test Pressure: 500Bar
Explosion Pressure: > 1020bar
Filling material: Air
Design Life: 15 Years
Content Gas: Breathable Air Only Conform to EN12245:2009+A1 2011
Service Temperature: -40 ℃~ 60 ℃
Diameter: 157mm, Length: 528mm, Thread:M18 x 1.5
Liner: AA6061
Carbon fiber: T700
Resin: Epoxy
Re- Test: 3 Years
2. Instructions:
2.1 The filling, transportation, storage, using of the carbon fiber fully wrapped aluminum liner gas cylinder must meet the gas cylinder safety supervision regulation.
2.2 The cylinder with life of 15 years should be re-inspected once every 5 years. Re-inspection should be carried out by agency which is authorized and approved by qualified inspection administration. Only the qualified cylinder can be used.
2.3 If the cylinder is found leaking or fiber breakage, damage, scratches, etc, the cylinder can not be used.
2.4 Cyinders should be used within the temperature -40 ℃~ 60 ℃.
2.5 The gas in the cylinder can not be used up. The residual pressure should be retained not less than 0.05Mpa
2.6 The cylinder should be gently used, and prevented from impact, scratch and corrosion.
2.7 The cylinder at working pressure should be prevented from the exposure, heat , and fire. Make sure that the cylinder is dry.
2.8 The content in the cylinder must be in accordance with the label . The cylinders should be used within the nominal operating pressure, prohibit excess.
2.9 Removing or changing the label is forbidden
2.10 If the cylinder need be installed valve or replaced valve, they should comply with EN 12245:2009 cylinder leakage test method
Aluminium lining made from high quality aluminium plate:
Cylinder shaping:
Carbon fiber Wrap
Finished Products:
