|
[China]
Trade Verify
Address: Room 1608 Dingye International Mansion, No. 54 Moscow Road, Qingdao Free Trade Zone, China
Contact name:Michelle Zhang
Qingdao Florescence Marine Supply Co., LTD. |
|
Verified Suppliers
|
|
|
Hull Fender Ship Rubber Bumper Cylindrical Marine Fender
Applications of our Ship Cylindrical Fenders:
Bow,side and stern of most vessels
Bulk cargo berths
General cargo quays
RoRo and ferry terminals
Fishing and workboat berths
Pontoons and floating structures
Tug havens
Features of our Ship Cylindrical Fenders:
1.Hanged by chains and steel bars, easy to stall and maintain.
2.Low reaction forces, little surface pressure and reasonable energy absorption.
3.Especially applicable for upper part of integral docks
4.Good adaptability for transversal and longitudinal shape during berthing.
Standard of our boat fender: GB/T 19001-2008 idt9001:2008
Cylindrical fenders advantage
Low reaction forces, little surface pressure, best choice for the
port and jetty.
Applicable for latitudinal and crosswise sway of ships, can use for
lots kinds of vessels.
Applicable for ship swish different sizes, easy for installation,
time saving.
Cylindrical fenders are commonly used fenders which ensure a safe
and linear berthing for different kinds of vessels.
Cylindrical (extruded) fenders are an economical solution to protect most berthing structures, and offer ease of installation.
Size Table of Ship Cylindrical Fender
| Type | Y150 | Y200 | Y250 | Y300 | Y350 | Y400 | Y450 | Y500 | Y600 | Y700 | Y800 | Y900 | Y1000 | Y1100 | Y1200 | Y1300 | Y1400 | Y1500 | Y1600 | Y1800 | Y 2000 |
| Outer Diameter(mm) | Y150 | Y200 | Y250 | Y300 | Y350 | Y400 | Y450 | Y500 | Y600 | Y700 | Y800 | Y900 | Y1000 | Y1100 | Y1200 | Y1300 | Y1400 | Y1500 | Y1600 | Y1800 | Y 2000 |
| Inner Diameter (mm) | 75 | 100 | 125 | 150 | 175 | 200 | 225 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | 650 | 700 | 750 | 800 | 900 | 1000 |
| Other specifications out of the series can be produced upon request. | |||||||||||||||||||||
Installing
Performance
| Sepcification | 50% Relate Deflection | |||
| Reaction Force(KN) | Engery Asorption(KN-M) | |||
| Standard Type(FO) | High Type(FH) | Standard Type(FO) | High Type(FH) | |
| FCY150 | 45 | 75 | 1. 5 | 2 |
| FCY200 | 61 | 97 | 2. 7 | 4 |
| FCY250 | 77 | 122 | 4. 1 | 6. 6 |
| FCY300 | 91 | 146 | 6. 1 | 9 |
| FCY350 | 106 | 170 | 8. 2 | 13 |
| FCY400 | 121 | 195 | 10. 2 | 17 |
| FCY500 | 151 | 244 | 16. 3 | 26. 5 |
| FCY600 | 183 | 292 | 24. 5 | 27. 5 |
| FCY700 | 212 | 341 | 31. 6 | 51 |
| FCY800 | 242 | 391 | 41. 8 | 67. 3 |
| FCY900 | 273 | 439 | 53 | 85.7 |
| FCY1000 | 303 | 489 | 65. 3 | 105 |
| FCY1100 | 338 | 539 | 78. 5 | 132 |
| FCY1200 | 370 | 585 | 96. 9 | 155 |
| FCY1300 | 400 | 635 | 110 | 183 |
| FCY1400 | 430 | 683 | 131 | 212 |
| FCY1500 | 460 | 732 | 150 | 243 |
| FCY1600 | 491 | 792 | 180 | 288 |
| FCY1700 | 521 | 840 | 210 | 345 |
| FCY1800 | 552 | 889 | 252 | 414 |
| FCY1900 | 581 | 938 | 294 | 497 |
| FCY2000 | 666 | 1075 | 327 | 596 |
| NOTE: Performance tolerance is ±10% | ||||
Tugboat Fender Specifications:
Tugboat fenders are used to protect the bow and stern against the torch hull.
The basic design is a cylindrical fender, but with additional circumferential grooves for chain or nylon straps and tapered ends. Cylindrical tugboat fenders are usually secured by through-chains.
Tugboat fenders have a standard diameter of up to 1000 mm and a continuous or connected length of up to 20 m (length is limited only by handling and transportation). The long section is usually divided into 2 or 3 sections.
