Active Member
|
[China]
Address: Room 3010, HongDing Building, Baiyun District, Guangzhou, China.
Contact name:Annie Liang
Guangzhou Wenshen Cosmetics Co., Ltd. |
|
|
Biotouch Merlin Permanent Makeup Machine Pen Kit Factory Directly
Supply
Product Specifications :
| Model No | CTM019ML |
| Material | Stainless Steel |
| Color Choice | silver |
| Type | Permanent makeup machine kit |
| Needle Specification | 1R 2R 3R 5R 7R 3F 4F 6F |
| Shipping | EMS/DHL/Fexdex/UPS/Express |
| Brand | Biotouch Merlin Machine |
| Speed | 5000 to 6000 RPM |
| Type System | Electronic |
| MOQ | 1 Set |
| Payment Term | TT or Paypal or Western Union or MoneyGram Full Payment Before Shipment. |
| Delivery Day | about 3 to 5 Working Days After received your payment |
Description:
One of our most popular machines, the Merlin accommodates both
ROUND and FLAT needles. At 8,000 rpm, the Merlin’s powerful
rotary motor is noise free and provides even pigment deposit.
The machine is designed to move the needle up and down, rather than
side to side.
Benefits of this Design
Better pigment deposit
Less skin trauma
Faster healing
Less touch-ups needed
Less fading means more professional results
Applications:
Permanent makeup machine kit for eyebrow,lip and eye liner
Product Features :
1 . Aseptic : disposable sterile auxiliary supplies have double
protection function, Even if the machine Inverted start, while
adding pigments are no reflow phenomenon.The operator does not
touch the pigment and blood, so that consumers can avoid the cross
infection.
2 . Super Bass : the noise is very low when the machine is working
in, color fast, can be reduce customers' tension and sense of pain.
Let tattooist division work more convenient, fast.
3 . Science and intelligentialize : Ergonomic design, the fuselage
weight ratio, cabinet and delicate, easy to operate. Natural loss
in the movement has set intelligent data, guarantee the service
life of the machine.
Machine Trouble Shooting | ||
| If your permanent makeup machine is not working or not depositing enough pigment, perform the following steps to understand how each component is assembled and how to test them. | ||
1. Take off all used disposable parts, and reassemble with new ones. Sometimes a transmission shaft may be bent, or a needle cap too tight to hold the needle. | ||
2. Test each part. | ||
3. Look down the center hole of the machine while holding the motor. You will see a small, clear bar. Test your machine at this point. Turn on the machine by plugging the cord into the top of the machine. Press the “on” button, and twist the speed dial to “High.” When you turn on your machine, the clear bar should be spinning. This means your machine is working properly. Now turn the machine off and unplug it, so that you can begin the quick and easy assembly. | ||
4. Examine the transmission shaft. Make sure it is lubricated and not bent. Always use an unused shaft when you want to test the machine for proper function. Make sure the side pegs on the shaft are aligned with the black guide dots. | ||
5. Tilt the transmission shaft back slightly, away from the guide dots, before inserting. | ||
6. Make sure that the forked base on the shaft is resting lightly on the small clear bar in the motor assembly. The bar should be in between the fork. | ||
7. Check the needle tube. It should be new, not broken or bent. You should hear a double click when inserting it. Loosen the needle tube top nut slightly, but do not remove it. | ||
8. Now try the machine with a new, flat needle. Insert the needle base into the tube, then gently screw the tube nut to tighten for a snug fit. (If done properly you should be able to hold the machine up by the needle, letting the machine dangle, without it coming apart.) | ||
9. Check the foot pedal if there is one. You have to pump the pedal a few times to get the power going at first. The power cord connects to the pedal itself so if the machine doesn’t seem fast enough, have the customer plug the power cord directly to the machine instead to check it. The actual speed adjustment is on the machine, not the pedal. The pedal is for power only. | ||
10. Check machine speed. If the motor speed is sluggish or weak, let the machine run for 10-30 minutes. This will “break in” the motor components, and will allow them to build up to the proper capacity and speed. | ||
11. Ensure proper pressure is applied. Too little pressure will affect the pigment implantation and it’s ability tostay in the skin. To prevent fading or flaking, make sure the needle length and skin depth is adequate | ||
Our Service :
1. If you are not satisfied with this item after receiving within 7
days, you can send it back to us. Buyers pay the postage to return
the item. Be sure the item with original condition.
2. We will refund the 100% payment or exchange the related items.
Your 100% satisfaction is our goal, and it's our duty to guarantee
the quality.
3. The buyer should contact us for return address before dispatch
the parcel, and the buyer should tell us the shipping details and
the estimated arrival time. We are not responsible for the returned
parcel loss.
4. Please note: if the original condition items returned with
damage, no matter how, we need 10%-50% depreciation charge,
depending on the damage. No refunds will be given on items that
have been used; you can only exchange the item at that point. Any
other questions just feel free to contact us, surely, our team will
do a better job for you. Thank you for taking the time to view this
page.
Biotouch Merlin Permanent Makeup Tattoo Machine Kit For Eyebrows,Lipspicture show :
