Active Member
|
[China]
Address: Shanghai City , China
Contact name:Anne
Leyon steel Co., Ltd |
|
|
Synoptic table of Galvanized pipe nipples
| Size | Inch | 1/8 | 1/4 | 3/8 | 1/2 | 3/4 | 1 | 11/4 |
| mm | 6 | 8 | 10 | 15 | 20 | 25 | 32 | |
| Dim. (mm) | A | 29 | 36 | 38 | 44 | 47 | 53 | 57 |
| Size | Inch | 11/2 | 2 | 21/2 | 3 | 4 | 5 | 6 |
| mm | 40 | 50 | 65 | 80 | 100 | 125 | 150 | |
| Dim. (mm) | A | 59 | 68 | 75 | 83 | 95 | 103 | 110 |
Pipe Nipples can be found with a wide range of connection combinations. Some pipe nipples look very similar to one another which will make it difficult to know which one you need.
A nipple is usually provided with a male pipe thread (MPT) connection at each end of the fitting, which are used to make a watertight seal when connecting piping to threaded fittings, valves or equipment. Pipe nipples are in lengths up to 12”, lengths over 12” are referred to as ready cut pipe the thread specifications are identical however the tolerance on the length is less stringent on ready cut pipe.
Our Pipe nipple has different paint for surface treatment. Please contact us for detail offer.
