Dongguan Ming Rui Ceramic Technology Co.,ltd |
|
Customized Ceramic Disc 99% Machinable Alumina Ceramic Parts
Performance | |||||
Item | Index | Unit | Steatite ceramic | 95 Al2O3 | 96 Al2O3 |
Physical Characteristics | Bulk density | g/cm3 | 2.7 | 3.6 | 3.6 |
Water absorption | % | 0 | 0 | 0 | |
Mechanical Characteristics | Flexural strength | Mpa | 145 | 320 | 340 |
Hardness Vickers | Gpa | 5.7 | 12.2 | 13.5 | |
Elastic modulus | Gpa | 120 | 280 | 320 | |
Poisson’s ratio | - | 0.21 | 0.22 | 0.23 | |
Thermal Characteristics | Linear expansion coefficient | 20-5000C 10-6/0C | 7.9 | 7.1 | 7.2 |
Thermal conductivity | w/(m.k) | 2.5 | 16 | 24 | |
Specific Heat | *10-3J/(kg*K) | 0.75 | 0.78 | 0.78 | |
Electrical Characteristics | Dielectric constant(1MHZ) | - | 6.2 | 9 | 9.4 |
Dielectric loss angle | *10-4 | 18 | 15 | 5 | |
Dielectric strength | *106V/m | 18 | 12 | 15 |
Advantage
1). Excellent insulation, security, long working life.
2). High temperature resistance
3). Resistance to electric breakdown
4). Stand wear and tear
5). High strength
6). Corrosion resistance
7). Good compactness
8). HIgh hardness
Applicatiom:
1) Electric appliance industry
2) Automotive industry
3) Mechanical industry
4) Engineer industry
Alumina ceramic is the most mature of the engineering ceramics,
offering excellent electrical insulation properties together with
high hardness and good wear resistance, but relatively low strength
and fracture toughness. Alumina ceramic is generally white but may
also be pink or ivory. The color is derived from either the
sintering additives or impurities in the raw materials.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical
Industry etc. According to actual application and customer's
requirement, the purities vary from 95%-99.7% and the forming
methods will be different. The forming methods applied in our plant
include dry pressing, isostatic pressing, injection moulding,
extrusion moulding. With experienced engineers and talented
workers, we are confident to offer high quality, high precision,
complex components for customers worldwide.
General Characteristics of Materials: | ||||
Characteristic | Ceramics | Metals | Polymers | Refractory |
Density | Low to High | Low to High | Low | Low to Medium |
Hardness | High | Medium | low | Medium |
Toughness | low | High | Medium | low |
Wear Resistance | High | Medium | low | Medium |
Tensile Strength | Low to Medium | | low | low |
Compressive Strength | High | Medium to High | low to Medium | High |
Young’s Modulus | Medium to High | Low to High | Low | Medium |
Dimensional Stability | High | low to Medium | low | / |
Thermal Expansion | Low to Medium | Medium to High | High | low |
ThermalConductivity | Medium | Medium to High | Low | Medium |
Thermal Shock | Low | Medium to High | High | low to Medium |
Electrical Resistance | High | low | High | / |
Chemical Resistance | High | low to Medium | Medium | / |
More Photos
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .