Active Member
|
[China]
Address: NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China
Contact name:Admin deng
Dongguan Ming Rui Ceramic Technology Co.,ltd |
|
|
Ceramic Tube Heater Alumina Zirconia Good Polishing Nice Grinding
• Ceramic Half Tubes
• Ceramic Traverse Guides/Slit Guides/Hook Guides
• Ceramic Network Nozzles/Oling Nozzles
• Ceramic Valves
• Ceramic Insulators
• Ceramic Jigs and Fixtures
• Ceramic Discs
• Ceramic Pulleys
• Ceramic Bushes
• Ceramic Cores
• Ceramic Sleeves
• Ceramic Strainers
• Zirconia Ceramic Sleeves
• Ceramic Open End Hole Shoes
• Ceramic Big Shoes/Half Shoes
• Ceramic Cut Eyelets
• Ceramic Pipes
And every models you can provide drawing or patterns.
Mingrui applies ourselves to customize the products for customers.
Our Advantage
Special ceramics have a series of advantages such as wear resistance, heat
resistance, corrosion resistance and so on. Used in a variety of
places of industrial production. With the development of
technology, many aspects such as the heat resistance and hardness
of ceramics are further optimized.
Mingrui has its own technology to meet customer requirements for
hardness, heat resistance, smoothness.Mingrui has the most
professional technology.
The ceramic electronic components: low loss at high frequency. Good insulating , high strength, , low dielectric constant, Great mechanical strength, high air tightness, high chemical stability, etc. We can produce all kinds of ceramic holders, ceramic support, ceramic tubes, ceramic pipe, ceramic ring, etc. Widely used in electronic components, electronic device and electric products. Our products meet the international standards.
Performance:
| Alumina Content | Unit | 90-96% | > 99.5% | 99% |
| General Application | High Strength, Wear Resistant, Electronic, Insulating, Mechanical, Structural & Metalizing | Extremely High Purity, Temperature & Strength; Excellent Corrosion & Wear Resistance | Porous, Easily Degassed & Machinable | |
| Porosity | % | 0-.05 | 0-.05 | Variable |
| Density | gm/cm3 | 3.55-3.75 | 3.75-3.95 | 2.4 |
| Flexural Strength | kpsi | 40.0-50.0 | 50.0-55.0 | - |
| Comprehensive Strength | kpsi | > 300.0 | > 300.0 | - |
| Tensile Strength | kpsi | 20.0-28.0 | 20.0-28.0 | - |
| Linear Coefficient of Thermal Expansion | (cm/cm/°C) 25-300°C 25-700°C | 6.3X10-6 7.0X10-6 | 6.5X10-6 7.5X10-6 | 6.5X10-67.5X10-6 |
| Dielecctric Constant at 25°C | 1 MH 10 MH | 9.2-9.8 9.0-9.6 | 9.5-9.9 9.3-9.7 | - |
| Dielectric Strength | Volt/mil | 225 | 225 | - |
| Te Value | °F °C | > 1832 > 1000 | > 1832 > 1000 | > 1832 > 1000 |
| Thermal Conductivity at 25°C | cal/sec/cm2/cm/°C | .04-.06 | .07-.08 | - |
| Safe Use Temperature | °F °C | 3000-3100 1650-1700 | 3275 1800 | 3275 1800 |
Dongguan Ming Rui Ceramic Technology Co., LTD., a professional
manufacturer of machined ceramic parts, has 10 senior engineers and
lots of technicians. We produce strengthened structure zirconia
ceramic bar, ceramic tube, ceramic shaft, ceramic plate, ceramic
sleeve, ceramic valve, ceramic plunger and ceramic arm. The
products are applicable to instruments, medical instruments, clocks
and electronic products, mills, energy and power, machine and
metals, autocar and military and some other high-end areas.
In cooperation with Tsinghua University, we've achieved great
successes in particular requirements. With our professional
knowledge and business experience in machined ceramic parts,
low-budget and high-performance new ceramic products are made of
high–quality raw materials. The value of our ceramic products is
greatly increased due to the composite technology and precise
processing.
Our high efficiency machined ceramic parts, perfect service and
good reputation roots in our professional machined ceramic
technology, continuous innovation, great sincerity and our pursuit
for sustainable development. We have a unique technnology called
“mirror polishing” that has improved the brightness, color,
smoothness of our ceramic parts.
1. What kind of industry ceramics do you have ?
We specialized in 95% 97% 99% alumina ceramic and zirconia ceramic
parts .
2.Can you produce free samples for me ?
Yes usually , we can produce free samples for you but it is
up to the product complexity .
3.What terms can you accept for payment ?
T/T, L/C , Western union , Money Gram and Paypal is welcome , but
paypal and western union only for small -sum payment.
More photos :
