Active Member
|
[China]
Address: NO 21st ChuangXing Road, Shangsha community , Changan Town, Dongguan city Guangdong province, China
Contact name:Admin deng
Dongguan Ming Rui Ceramic Technology Co.,ltd |
|
|
High Temperature Resistance Zirconia Ceramic Tube Insulator Wear Resistant
We offer Ceramic Tubes in single, double and 4-bore tubing and oval double bore tubing at stocked lengths. The sizes of these ceramic tubes range from .020” to 8.250” (.50mm – 209.55mm). In stocked rods available from 0.011″ to 1.350″ (0.28mm to 34.29mm)
Ceramic Tubes & Rods Material Designation
Mullite: 3Al2O3•2SiO2
Alumina 99.8%: 99.8% Dense Alumina (Al2O3)
Alumina 99.5%: 99.5% Dense Alumina (Al2O3)
Alumina 96%: 96.0% Dense Alumina (Al2O3)
TTZ: Magnesia partially stabilized Zirconia (ZrO2)
YTZP: Yttria partially stabilized Zirconia (ZrO2)
ZDY: Yttria fully stabilized Zirconia (ZrO2)
Mingrui ceramic tube offer excellent resistance to chemical corrosion, abrasion, and wear. Millions of farmers across 45 countries trust precision ceramic nozzles for consistent application and long useful life — using engineering ceramic materials as hard as diamond.
Mingrui ceramic spray nozzles exhibit wear resistance far higher than conventional materials such as stainless steel, brass, or plastics.
Mingrui Ceramic factory offers two types of miniature, precision nozzles for hydraulic applications: Atomizing Nozzles and Targeting Nozzles. Both types are constructed entirely of zirconia ceramic and can be installed in any attitude.
Material:zirconia ceramic
Key Specifications/Special Features:
Excellent features :
1. Material:zirconia graulation
2. Using many fine technology such as dry press molding and isostatic press molding.
3. High strength,high hardness,resist to high temperature, wearing and corrosion.
4. It can do a good job under mang bad conditions such as high temperature,high pressure,vacuum,inflammable,explosive,acid,alkali,steam,non-lubricated environments.
5. Preventing material from contamination because of its extreme low wear rate.
Apllication:Materials for grinding and dispersed,structural ceramics,electronics,refractory ceramics,magnetic material,metallurgy,medicine,food,cosmetics,textiles,printing and dyeing,pigment and other industries.
Industrial Ceramic Intriduction
Aluminium Oxide, Al2O3 is the most widely applied and cost
effective technical ceramic material. It offers a combination of
superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical
Industry etc. According to actual application and customer's
requirement, the purities vary from 95%-99.7% and the forming
methods will be different. The forming methods applied in our plant
include dry pressing, isostatic pressing, injection moulding,
extrusion moulding. With experienced engineers and talented
workers, we are confident to offer high quality, high precision,
complex components for customers worldwide.
Product Description
Mingrui Ceramics has years of experience designing and developing technical ceramic solutions for a wide variety of applications and industries. Anti-chemical Corrosion Zirconia Ceramic Parts Chemical Stirring Rod. We offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific application and needs. Anti-chemical Corrosion Zirconia Ceramic Parts Chemical Stirring Rod, Typically, our custom technical ceramic components and parts we supply are used for one of three main reasons:
High Precision Zirconia Ceramic Spray Nozzle Zirconia Ceramic Parts
for Agriculture
High temperature ceramics – crucibles, nozzles, lasers,
furnace/kiln fixtures
High Precision Zirconia Ceramic Spray Nozzle Zirconia Ceramic Parts
for Agriculture
Wear and corrosion resistant ceramics – plates, housings, gages,
caps/lids
High Precision Zirconia Ceramic Spray Nozzle Zirconia Ceramic Parts
for Agriculture
Electrical insulation ceramics – contact blocks, standoffs,
fasteners, spacers
High Precision Zirconia Ceramic Spray Nozzle Zirconia Ceramic Parts for Agriculture
Mingrui Ceramics is one of the world’s premiere technical ceramic
suppliers – contact us to see what technical ceramics we can create
for you.
High Precision Zirconia Ceramic Spray Nozzle Zirconia Ceramic Parts for Agriculture
| General Characteristics of Materials: | ||||
| Characteristic | Ceramics | Metals | Polymers | Refractory |
| Density | Low to High | Low to High | Low | Low to Medium |
| Hardness | High | Medium | low | Medium |
| Toughness | low | High | Medium | low |
| Wear Resistance | High | Medium | low | Medium |
| Tensile Strength | Low to Medium |
High | low | low |
| Compressive Strength | High | Medium to High | low to Medium | High |
| Young’s Modulus | Medium to High | Low to High | Low | Medium |
| Dimensional Stability | High | low to Medium | low | / |
| Thermal Expansion | Low to Medium | Medium to High | High | low |
| ThermalConductivity | Medium | Medium to High | Low | Medium |
| Thermal Shock | Low | Medium to High | High | low to Medium |
| Electrical Resistance | High | low | High | / |
| Chemical Resistance | High | low to Medium | Medium | / |
| Oxidation Resistance | Medium to High | low | low | / |
| Machinability | Medium | low | Medium | / |
Dongguan Ming Rui Ceramic Technology Co.,ltd is a professional manufacturer which is specialized in zirconia ceramics. We have 10 senior engineers and lots of technologists; our ceramic products are precision ceramic structure parts used mainly in industrial field, which is made of strengthened structure zirconia ceramic. Our products including strengthened structure zirconia ceramic,ceramic bar,ceramic tube,ceramic shaft,ceramic plate,ceramic sleeve,ceramic valve,ceramic plunger and ceramic arm. The product we produced are applicable to Instruments,Medical instrument,Clocks and Electronic Products,Mills,Energy and Power,Machine and Metals,Autocar and Military and some other high - end areas.
Dongguan Ming Rui have achieved great successes in particular requirements which is based on cooperating with Tsinghua University and professional knowledge and business experience by ourselves. We get the low-budget and high-performance new ceramics products from the high – quality raw materials and composite technology and precision processed, technical and value are increasing strongly.
In professional technology, innovation, sincerity, sustainable development, offering the high efficiency products, perfect service, good reputation. By the way, our company have an unique technical called “mirror polishing” which is improved our products bright,color,smooth and made our product better than other competitors.
Warmly welcome all the customer form the world to visit our company!
| Manufacturing Options | Advanced Finishing Services |
| Injection molding | Precision grinding and lapping |
| Roll compacting | Laser machining |
| Extruding | Engineering design and support |
| Co-firing | Metallizing |
| Isostatic pressing | Ceramic-to-metal brazing |
| Dry pressing | Specialized coatings |
| Hot pressing | Threaded components |
| Tape casting | Precision motion components |
| Slip casting | Complex clean room assemblies |
More photos :
