A type automatic filling line (IBC barrel)

■ Product model: GAF-1500SA

■Applicable to products: Suitable for accurate filling of general liquid materials in the industry, such as solvents, coatings, paints, resins, curing agents,

Lubricants, inks, thinners, edible oils, chemical liquids, etc.

■Basic parameters:

using electric

AC220V 50/60HZ 0.1KW

Filling capacity

40~90 barrels/Hr (depending on material flow rate)

Use gas source

0.5~0.7 Mpa

Filling accuracy

≤ 0.05% F.S.

Filling capacity

200~1500kg

Gun material

SUS304 / SUS316

Fractional value

0.1kg

Explosion-proof grade

Exd11BT5

■ Product features:

◆ Swing arm type squirt gun, using large slewing bearing and linear track, can move around column, back and forth, fully applicable to 200L four barrels

And IBC barrel filling

◆ Pneumatic operation buttons are more convenient and safer, with left and right disc brakes and front and rear side brakes, to prevent the gun from touching the barrel mouth.

Make filling easier, more accurate, and beyond the industry;

◆ Double-side anti-impact pound table, close protection of the load unit, the quality is more solid if the stone; gun handle shortcut operating disk, so that the operation is more

flexible.

■ System features:

◆ Chinese display: 7-inch full Chinese color LCD screen, full Chinese fool guide operation;

◆Intelligent and high-efficiency: No barrel filling for scales, differential pressure zero-hour bumper protection, automatic peeling, intelligent fool-proof, fault detection, etc.

To achieve single operation of filling and capping at the same time;

◆ Professional Gun: From German technology, five-layer seals are professionally designed to ensure that the filling is completed without leakage;

◆Easy to operate: The quick start key of the gun can be activated/emergencyly stopped, and the filling height can be adjusted by 150mm. It is suitable for barrels with different specifications;

◆Function switching: net weight/gross weight, automatic/manual function switching mode;

◆Accurate and rapid: configuration of ball valves and guns, large, small, micro three-stage filling design, to eliminate changes in the flow rate of the filling on the filling

Degree of influence, so that filling accuracy and speed leading the industry;

◆Import configuration: Mitsubishi PLC (Japan Plant), Japan OMRON Relay, France Schneider Switch, Taiwan DONGYU Ball Valve Unit

US-made actuators, Yadeke cylinders, and Taiwan-made GSS LCD screens ensure that the overall performance of the equipment is stable, fast, accurate, and robust;

◆ Explosion-proof protection: Integral cast aluminum explosion-proof electric control box, explosion-proof grade Exd II BT5, protection class IP67.

■ Operation process:

Start-up - fork lifter to the weighing platform - operate the handle of the gun, press the brake release button, and then fast, right and left - to release the brake release button.

The gun is tightly fixed - press the [Start] key - automatically insert the gun into the barrel - automatically peeled - automatically open the gun and ball valve - large, small,

Micro three-stage filling --- automatically raise the gun automatically with the liquid surface --- reach the target value --- the gun automatically closes and rises outside the barrel --(remove the irrigation

Gun to the next barrel, repeat the above steps to the end of 50GL four barrels filling) --- Filling is completed.

■Function matching:

Double-gun dual metering / multi-gun multi-meter / nitrogen filling device / other custom.

■ Product Overview:

Liquid filling machine is a kind of packaging equipment with a very high degree of automation. Its main function is to automatically fill the liquid material into a predetermined setting weight.

the amount. The liquid filling machine can effectively avoid the overflow of materials during the filling process, and prevent the pollution of the material itself from the environment to the greatest extent.

The operator is effectively labor-protected. The system is stable and reliable, simple in operation and accurate in filling. Filling machine mainly consists of irrigation

Gun device, PLC system control part, weighing system, filling rack, conveying equipment and other components.