Active Member
|
[China]
Address: 20th floor, Saigeyuan building C, Huaqiang south road, Futian district, Shenzhen China
Contact name:Linda
Shenzhen Lys Technology Co.,ltd |
|
|
Professional Produce Tungsten Carbide Wire Drawing Dies
-The recommended grades of tungsten carbide drawing dies
| Grade | Hardness (HRA) | TRS (N/mm²) | Density (g/cm³) | Applications recommended |
| YG6X | ≥91 | ≥1420 | 14.8-15.1 | For drawing steel and nonferrous wires or bars of less than 6.00mm under not so much stress |
| YG6 | ≥89.5 | ≥1520 | 14.7-15.1 | For drawing steel,nonferrous alloy bars of less than 20.00mm under more stress and also for drawing stress and also for drawing tubes of less than 10.00mm |
| YG8 | ≥89 | ≥1470 | 14.6-14.9 |
For drawing steel and nonferrous bars and tubes ,also for manufacturing mechanical parts ,tools and wear parts |
| YG8.2 | ≥88 | ≥1450 | 14.4-15.0 | |
| YG8L | ≥89 | ≥1450 | 14.6-15.0 | |
| YG15 | ≥86.5 | ≥2060 | 13.9-14.2 |
For drawing steel bars and tubes with a high reduction rate and for manufacturing anvils ,drilling and punching and impacting dies |
| HK12 | ≥87.5 | ≥2100 | 14.2-14.7 | |
| HY10 | ≥87.5 | ≥2060 | 14.1-14.5 | |
| YG20 | ≥83.5 | ≥2480 | 13.4-13.8 | |
| YG20C | ≥82 | ≥2480 | 13.4-13.8 | For making machining and impacting dies for watch parts and musical instruments springs ,batteries shells and tooth paste shells ,etc,also for making punching and impacting dies for steel balls of small diameters,screws and nuts,etc |
| YG20D | ≥82 | ≥2300 | 13.4-13.8 | |
| YSN30 | ≥87 | ≥1900 | 13.9-14.9 | It is a demagnetized cemented carbide suitable for manufacturing forming tools in industries of magnetism |
