wire drawing die nibs,wire drawing die blank,enamelling dies,Extrusion Dies,shaving die

wire drawing die nibs,wire drawing die blank,enamelling dies,Extrusion Dies,shaving die

Our extensive range of round and shaped profile dies are used by most of the major wire, tube and rod manufacturers within China and throughout the world.

We supply the full range of die pellets for many different applications and suitable grades of material are available to meet the individual customer's needs.

Find out more about the different dies below. For your exact requirements and further technical information,

TUNGSTEN CARBIDE DRAWING DIES: FOR WIRE, ROUND AND SHAPED

Used by all major round and shaped wire producers, Tungsten Carbide Drawing Dies are used to draw ferrous and non-ferroused materials.

We can supply the dies fully finished or rough cored-cased or uncased, to meet your exact requirements.

TUNGSTEN CARBIDE DRAWING DIES: FOR BAR: ROUND AND SHAPED

Used by all major round and shaped BAR producers, Tungsten Carbide Drawing Dies for round and shaped bars are used to draw ferrous and non-ferroused materials.

We can supply the dies fully finished or rough cored - cased or uncased to meet your exact requirements.

'SUPERLUBE' PRESSURE DIE SYSTEM

The introduction of the 'Superlube' Pressure Die System has generated a considerable amount of interest within the wire drawing industry. Several major wire manufacturers are achieving excellent results from the introduction of this system. Used to increase lubrication, the system is ideally suited for drawing mechanically descaled rod.

The advantages over conventional dies or other types of pressure die are:

• Faster Drawing Speeds
• Longer Die Life
• Excellent results on mechanically descaled rod
• Fits into standard die box
• Easy die change
• Lower die costs

EXTRUSION DIES & TIPS

Used by cable manufacturers. Our Extrusion Dies & Tips provide the means to apply plastic, and other coatings, to cable and wire, either shaped or round profiles.

ENAMELLING DIES

Enamelling Dies are specialist dies, made specifically to apply enamel coating to wires for electric motors.

SHAVING DIES

Fully finished in Tungsten Carbide or High-Grade Tool Steel our Shaving Dies can be used to shave ferrous or non-ferrous material, they are frequently used by drawing companies for surface preparation of rod.

'LUMPKILLER' DIES

Used in the manufacture of 'Hot Dip' Galvanized Wire to remove excess zinc prior to drawing, our 'Lumpkiller' Dies are fully finished in Tungsten Carbide.

SPINNER DIES AND CUTTING DIES

Wire manufacturers who produce straight lengths use spinner Dies and Cutting Dies. We supply a variety of sizes to suit most straightening and cutting machines.

Shenzhen Lys Technology Co., Ltd

Company address: 20th floor, Saigeyuan building C, Huaqiang south road, Futian district, Shenzhen China

Factory address: No. 57 Jinshan industrial park, Hetang district, Zhuzhou City, Hunan province China

Tel: 0086-731-22397993 Fax: 0086-731-22623865

E-mail: peter@lystechnology.com linda@lystechnology.com

Website: www.lystechnology.com www.lyscarbide.com http://lystechnology.en.gasgoo.com